User Manual

FCC ID: PRDMU61

Users Manual

Download: PDF
FCCID_3735805

Model Name: GP7 Compact Ergonomic Wireless Mouse with Fast Scrolling USER'S GUIDE Ver.:1.00 CAUTION: To use this product properly, please read the user's guide before installing.

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. 1

IC Notice: This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference. and (2) this device must accept any interference. Including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CAN ICES-3 (B) / NMB-3 (B) 2

Functional Introduction 1. Left button 4. Forward 7. Nano Receiver 2. Right button 5. Backward 8. Battery Cover 3. Scrolling Wheel 6. Hyper scrolling Key 9. ON/OFF Switch & LED Indicator Forward Press this button to view the next page in your Internet browser. Backward Press this button to view the previous page in your Internet browser. Hyper Scrolling Key (Two scrolling speeds) a) Normal Scroll – LED Off b) Hyper Scrolling – LED on and off after 10 secs * Default is Normal Scroll * 3

Encrypted air-protocol with AES 128 AES (Advance Encryption Standard) is a specification for the encryption of electronic data. Installing the batteries Step 1: Take the battery cover off. Step 2: Insert the battery as shown inside the battery compartment. Pull AA Battery X 1 Step 3: Replace the cover. Step 4: Turn on power switch 4

**Warning: *Please insert the battery with the correct position according to the instruction labeled on the mouse. Step 5: If you need to travel with your wireless mouse, made sure you turn off the POWER SWITCH. Setup the Connection between the Receiver and the Mouse 1. Insert the battery into the mouse, then follow the steps below. 2. In the meantime, a storage slot on the back to storage the receiver , take the nano receiver out. 3. Plug the Nano receiver into the USB port on your computer. 5

4.. The LED indicator on mouse flashes steadily when it is in pairing mode and stops blinking when it is successfully paired with the receiver. 5. When low battery, the battery indicator on the mouse will start to blink. LED Indicator *LED Indicator LED is on for 3 sec. Power ON LED Blinks for 3 times During Pairing (LED OFF when paired or failed after 10 sec.) LED Blinks for 10 sec. Low Battery Warning Hyper scrolling Indicated (when Hyper scrolling switched) 6


Document Created: 2018-01-29 17:27:13
Document Modified: 2018-01-29 17:27:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC