Users Manual

FCC ID: PRDMU15

Users Manual

Download: PDF
FCCID_1891749

V1 FINAL DX-WLM1401_12-1182_QSG_V1_EN.ai 1 1/17/2013 10:13:07 AM FOR PRINT Thank you for purchasing this Dynex Wireless Laptop Mouse. Installing the batteries and removing the nano receiver Package contents 1 Take the battery cover off. • Wireless Laptop Mouse with nano receiver 2 Remove the nano receiver. • Quick Setup Guide System requirements Pull • Windows® 8, Windows® 7, Windows Vista®, or Windows® XP DX‐WLM1401‐BK • One available USB port Wireless Mouse Features ON/OFF switch Connect 3 Insert the batteries as shown inside the battery compartment. Scroll 4 Replace the cover. button wheel Caution: Insert the battery with the correct orientation, according to Right the instruction label on the mouse. button LED indicator and Left button Nano receiver Battery cover AAA batteries Before using your new product, please read these instructions to prevent any damage. QUICK SETUP GUIDE Setting up the connection between the receiver and Cleaning your mouse RSS-Gen and RSS-210 statement This device complies with Industry Canada license-exempt RSS standard(s). • Wipe the mouse with a damp, lint-free cloth. Operation is subject to the following two conditions: (1) this device may not cause interference,

QUICK SETUP GUIDE DX-WLM1401_12-1182_QSG_V1_EN.ai 2 1/17/2013 10:13:15 AM Setting up the connection between the receiver and Cleaning your mouse RSS-Gen and RSS-210 statement This device complies with Industry Canada license-exempt RSS standard(s). the mouse • Wipe the mouse with a damp, lint-free cloth. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause 1 Plug the nano receiver into a USB port on your computer. undesired operation of the device. Troubleshooting Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne • Make sure that your computer meets the system requirements. doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage • Only use the mouse on a clean, flat, non-slippery surface to ensure radioélectrique subi, même si le brouillage est susceptible d'en compromettre le smooth and accurate cursor action. fonctionnement. RSS-102 statement • If your mouse stops working: This equipment complies with Industry Canada radiation exposure limits set forth for an • Make sure your mouse and nano receiver are paired by pressing uncontrolled environment. the connect button on the mouse. Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé. • Replace the mouse batteries. 2 If the mouse does not work, do the following: • Avoid using your mouse on reflective, transparent, or metallic surfaces. Re-plug the nano receiver into the USB port on your computer, then press the connect button on the mouse. If the mouse does not work One-year limited warranty after 10 seconds, pair them again by pressing the connect button on the Legal notices For complete warranty, visit www.dynexproducts.com. mouse. (The nano receiver has auto-pairing function). FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 3 The LED indicator on the mouse flashes steadily when it is in pairing conditions: (1) this device may not cause harmful interference, and (2) this device must accept any Contact Dynex mode and stops blinking when it is successfully paired with the nano interference received, including interference that may cause undesired operation. For customer service call 1-800-305-2204 receiver. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection www.dynexproducts.com 4 When the battery power gets low, the battery indicator on the mouse against harmful interference in a residential installation. This equipment generates, uses and can will start to blink. radiate radio frequency energy and, if not installed and used in accordance with the instructions, DYNEX is a registered trademark of BBY Solutions, Inc. Registered in some countries. may cause harmful interference to radio communications. However, there is no guarantee that Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A. interference will not occur in a particular installation. If this equipment does cause harmful ©2013 BBY Solutions, Inc. All Rights Reserved. Mouse indicator interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the LED indicator following measures: Power ON LED is on for 10 sec. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. Low battery warning LED blinks for 10 sec. • Connect the equipment into an outlet on a circuit different from that to which the receiver is Pairing LED blinks. connected. • Consult the dealer or an experienced radio/TV technician for help. When paired or LED is off. Warning: Changes or modifications not expressly approved by the party responsible for failed after 10 sec. compliance could void the user’s authority to operate the equipment. V1 ENGLISH 12-1182


Document Created: 2013-01-21 10:44:33
Document Modified: 2013-01-21 10:44:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC