User Manual

FCC ID: PRDKB31

Users Manual

Download: PDF
FCCID_3412237

2.4G Wireless Keyboard
w/Nano Receiver

USER'S GUIDE
Ver.:1.00




CAUTION: To use this product properly, please read the user's guide before installation


Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:

-      Reorient or relocate the receiving antenna.
-      Increase the separation between the equipment and receiver.
-      Connect the equipment into an outlet on a circuit different from
      that to which the receiver is connected.
-      Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the
product can be kept as far as possible from the user body or set the device to
lower output power if such function is available.


                                      1


Functional Introduction
Keyboard Buttons




                                          AAA battery X 2




 Key Function

 1.             My Computer               My Computer
                                          Start the default Web browser and
 2              Homepage(www/e)
                                          loads the home Web page
 3.             Outlook(E-mail)Default   Start the default e-mail program

                                      2


                                         Search inside apps , albums, artists,
 4.           Search
                                         or song
                                         Decrease the computer's sound
 5.           Volume down (Voice-)
                                         volume.
                                         Switch between playing and pausing
 6.           Play/Pause
                                         media
 7.           Mute                       Mute (turns off) the computer's sound
                                         Increase the computer's sound
 8.           Volume up (Voice+)
                                         volume.
 9.    LED Indicator                     Low Battery & Pairing Indicator
 10    Connect Button
 11    Battery Cover



Setup the Connection between the Receiver and
the Keyboard.
1. Insert the batteries into the Keyboard, then follow the steps below.
2. Plug the Nano receiver into the USB port on your computer.




3. If the keyboard does not work, please put them into pairing mode.
4. Pairing: Re-plug the receiver into the USB port on your computer, then
press connect button of the mouse and keyboard. If the keyboard does
not work after 10 seconds, pair them again. (The receiver has auto
pairing function).
5. The LED indicator on the Keyboard flashes steadily when it is in
pairing mode and stops blinking when it is successfully paired with the
receiver.

                                     3


6. When low battery, the battery indicator on the keyboard will start to
blink.

                LED indicator            *Keyboard Indicator


                                         LED is on for 10 sec.
                                         Power ON

                                         LED Blinks for 10 sec.
                                         Low Battery Warning

                                          LED Blinking
                                          Pairing (LED OFF when paired or
                                          failed after 10 sec.)




                                    4



Document Created: 2017-05-24 14:28:55
Document Modified: 2017-05-24 14:28:55

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC