User Manual

FCC ID: PRDCOWIFIKB08

Users Manual

Download: PDF
FCCID_1335775

2.4G Multimedia Keyboard
                    & Mouse
    USER'S GUIDE
Ver.:1.00




CAUTION: To use this product properly, please read the user's guide before installation


Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following
measures:

-      Reorient or relocate the receiving antenna.
-      Increase the separation between the equipment and receiver.
-      Connect the equipment into an outlet on a circuit different from
       that to which the receiver is connected.
-      Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.




                                    1


    Functional Introduction                                              Nano Receiver
                                                    Connect
                                                    Button
                                  Battery Cover
        Scrolling Wheel &
        LED Indicator




Right button                                                             ON/OFF
                                                                         Switch




               Left button



  Battery and Power Management:
  Step 1: Pull the battery cover backward.
  Step 2: Insert the batteries as shown inside the battery compartment.
  Step 3: Replace the cover.
                                            Insert
          Pull out




  For Extra usage hours, use two AA batteries instead of two AAA Batteries.

  **Warning:
  *Please insert the battery with the correct position according to the instruction
   labeled on the mouse.

                                            2


Keyboard Buttons

                   Media Player Hot Keys




                                AAA battery X2




                                3


 Media Player Hot Keys
 1.            Outlook(E-mail)Default       Start the default e-mail program
 2.            Homepage(www/e)               Start the default Web browser and loads
                                             the home Web page
 3.            Web Stop                      Stop loading the current page
 4.            Search                        Open the Internet Explorer Search panel
 5.            My Favorites                  Start my favorites
 6.            Mute                          Mute (turns off) the computer's sound
 7.            Volume down (Voice-)          Decrease the computer's sound volume.
 8.            Volume up (Voice+)            Increase the computer's sound volume.
 9.            Play/Pause                    Switch between playing and pausing
                                             media
 10.           Calculator                    Start Microsoft Calculator
 11.           My Computer                   My Computer
 12.   LED Indicator                         Low Battery & Pairing Indicator
 13.   104 standard-Keys
 14.   Connect Button
 15    Battery Cover



Setup the Connection between the Receiver and the Mouse,
Keyboard.
1. Plug the RF receiver into the USB port of your computer.




2. Insert the batteries into the mouse and keyboard, then follow the steps
   below.
3. If the mouse or the keyboard is not working, please put them into
   pair mode.

                                         4


4. Pairing: Re-plug the receiver into the USB port of your computer, then
   press connect button of the moue and keyboard. If the mouse or
   keyboard does not work after 10 seconds, pair them again. (The
   receiver has auto pairing function).
5. When the batteries’ power of the keyboard is low, the Low Power
   indicator will start to blink.

                                         *Mouse Indicator
    LED Indicator
                                          LED is on 3 sec.
                                           Power ON

                                         LED Blinks 3 times
                                         During Pairing

                                         Low Battery Warning will blink
                                         10 times when turn on.




                                        *Keyboard Indicator
            LED indicator                Red LED is on for 10 sec.
                                         Power ON

                                         Red LED Blinks for 10 sec.
                                         Low Battery Warning

                                        Red LED Blinking
                                        Pairing (LED OFF when paired or
                                        failed after 10 sec.)




                                   5



Document Created: 2010-08-26 13:49:40
Document Modified: 2010-08-26 13:49:40

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC