MPE Report

FCC ID: PR6BFI

RF Exposure Info

Download: PDF
FCCID_4141013

849 NW STATE ROAD 45 PHONE: 352.472.5500 NEWBERRY, FL 32669 USA EMAIL: INFO@TIMCOENGR.COM WEB: HTTP://WWW.TIMCOENGR.COM An IIA Company RF Exposure Evaluation Report APPLICANT ZAXCOM, INC. 230 WEST PARKWAY, UNIT 9 ADDRESS POMPTON PLAINS N.J. 07444 USA FCC ID PR6BFI IC 12755A-BFI MODEL NUMBER DEVAIFB PRODUCT DESCRIPTION ISB TRANSMITTER DATE SAMPLE RECEIVED 06/18/2018 FINAL TEST DATE 06/22/2018 PREPARED BY Franklin Rose TEST RESULTS PASS FAIL Report Number Report Version Description Issue Date 885UT18 Rev1 Initial Issue 06/22/2018 MPE_TestReport_ THE ATTACHED REPORT SHALL NOT BE REPRODUCED EXCEPT IN FULL WITHOUT THE WRITTEN APPROVAL OF TIMCO ENGINEERING, INC.

TABLE OF CONTENTS GENERAL REMARKS ............................................................................................................ 2 GENERAL INFORMATION ..................................................................................................... 3 ANTENNA INFORMATION ..................................................................................................... 3 MANUFACTURER’S STATEMENT ....................................... ERROR! BOOKMARK NOT DEFINED. MPE CALCULATION ............................................................................................................. 4

GENERAL REMARKS Summary The device under test does: Fulfill the general approval requirements as identified in this test report and was selected by the customer. Not fulfill the general approval requirements as identified in this test report Attestations This equipment has been tested in accordance with the standards identified in this test report. To the best of my knowledge and belief, these tests were performed using the measurement procedures described in this report. All instrumentation and accessories used to test products for compliance to the indicated standards are calibrated regularly in accordance with ISO 17025 requirements. I attest that the necessary measurements were made at: Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Designation #: US1070 Prepared by: Name and Title Franklin Rose, Project Manager / EMC Testing Technician Date 06/22/2018 Applicant: Zaxcom, INC. Report: 885IC18 MPE_TestReport_Rev1 Page 2 of 4

GENERAL INFORMATION EUT Description ISB TRANSMITTER FCC ID PR6BFI IC 12755A-BFI Model Number DEVAIFB 110–120Vac/50– 60Hz EUT Power Source DC Power (12.0 V) Battery Operated Exclusively Prototype Test Item Pre-Production Production Fixed Type of Equipment Mobile Portable Antenna Connector SMA The temperature was 26ºC Test Conditions Relative humidity of 50%. Modification to the EUT No Modification to EUT. Applicable Standards FCC CFR 47 Part 2.1091 Timco Engineering Inc. at 849 NW State Road 45 Newberry, FL Test Facility 32669 USA. Designation #: US1070 ANTENNA INFORMATION Manufacturer Provides Max Gain Type Antenna (dBi) Yes 2.4 GHz Quarter Wave whip antenna 2.2 Applicant: Zaxcom, INC. Report: 885IC18 MPE_TestReport_Rev1 Page 3 of 4

MPE CALCULATION The minimum separation distance is calculated as follows: 1. ISED General Uncontrolled Exposure Environment: The limit for General Uncontrolled Exposure Environment is calculated as shown in RSS-102: Variable Value Max Power 0.14 W Duty Cycle (at full power) 100% Max Antenna Gain 2.2 dBi Coax Loss 0 (unspecified) Power Density 0.04622 W/m2 Minimum Separation Distance 20 cm 2. FCC General Population/Uncontrolled Exposure: The limit for General Uncontrolled Exposure is calculated as shown in FCC Part 1.1310: Variable Value Max Power 0.14 W Duty Cycle (at full power) 100% Max Antenna Gain 2.2 dBi Coax Loss 0 (unspecified) Power Density 0.04622 mW/cm2 Minimum Separation Distance 20 cm Applicant: Zaxcom, INC. Report: 885IC18 MPE_TestReport_Rev1 Page 4 of 4


Document Created: 2019-03-23 02:42:26
Document Modified: 2019-03-23 02:42:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC