Test Report

FCC ID: PR4ACU3SOLOX

Test Report

Download: PDF
FCCID_2554102

FCC PART 18 TEST REPORT For Whirlpool Microwave Products Development Limited 16/F, Paliburg Plaza 68 Yee Woo Street, Causeway Bay, Hong Kong FCC ID: PR4ACU3SOLOX Report Type: Product Type: Class II Permissive Change Microwave Oven Test Engineer: Joson Xiao Report Number: RSZ141208552-00 Report Date: 2015-01-29 Dick Zhang Reviewed By: EMC Leader Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the equipment described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 TEST FACILITY .............................................................................................................................................................4 OPERATING CONDITION/TEST CONFIGURATION ..........................................................................................5 JUSTIFICATION .............................................................................................................................................................5 EQUIPMENT MODIFICATIONS .......................................................................................................................................5 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................................5 EXTERNAL CABLE LIST AND DETAILS .........................................................................................................................5 CONFIGURATION OF TEST SETUP .................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................6 CONDUCTED EMISSIONS ........................................................................................................................................7 APPLICABLE STANDARD ..............................................................................................................................................7 MEASUREMENT UNCERTAINTY ....................................................................................................................................7 EUT SETUP ..................................................................................................................................................................7 EMI TEST RECEIVER SETUP .........................................................................................................................................8 TEST PROCEDURE ........................................................................................................................................................8 TEST EQUIPMENT LIST AND DETAILS ...........................................................................................................................8 TEST RESULTS SUMMARY ............................................................................................................................................8 TEST DATA ..................................................................................................................................................................9 RADIATION HAZARD MEASUREMENT .............................................................................................................11 APPLICABLE STANDARD ............................................................................................................................................11 TEST DATA ................................................................................................................................................................11 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................11 RADIATION HAZARD MEASUREMENT ........................................................................................................................11 INPUT POWER .............................................................................................................................................................12 LOAD FOR MICROWAVE OVENS .................................................................................................................................12 RF OUTPUT POWER MEASUREMENT ..........................................................................................................................12 OPERATING FREQUENCY MEASUREMENT ..................................................................................................................14 RADIATED EMISSIONS ...........................................................................................................................................16 APPLICABLE STANDARD ............................................................................................................................................16 MEASUREMENT UNCERTAINTY ..................................................................................................................................16 EUT SETUP ................................................................................................................................................................16 EMI TEST RECEIVER SETUP AND SPECTRUM ANALYZER SETUP................................................................................17 TEST PROCEDURE ......................................................................................................................................................17 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................18 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................18 TEST RESULTS SUMMARY ..........................................................................................................................................18 TEST DATA AND PLOTS ..............................................................................................................................................19 FCC Part 18 Page 2 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 GENERAL INFORMATION Product Description for Equipment under Test (EUT) The Whirlpool Microwave Products Development Limited’s product, model number: WMH73521 (FCC ID: PR4ACU3SOLOX) or the “EUT” in this report is a Microwave Oven, which was measured approximately: 76.0 cm (L) x 43.5 cm (W) x 47.1 cm (H), the rated with input voltage: AC 120V/60Hz. The operating frequency is 2450 MHz. *All measurement and test data in this report was gathered from production sample serial number: 1412003 (Assigned by BACL, Shenzhen). The EUT supplied by the applicant was received on 2014-10-15. Objective This report is prepared on behalf of Whirlpool Microwave Products Development Limited. in accordance with Part 2-Subpart J, and Part 18-Subparts A, B and C of the Federal Communication Commissions rules and regulations. The objective of the manufacturer is to determine the EUT of compliance with FCC Part 18 limits. This is the CIIPC application of the device. The difference between the original device and the current one is as follows: 1. Changing the magnetron, the original magnetron is Panasonic LG-2M226, and the current one is Toshiba LG-2M226. 2. Changing the high voltage transformer, the original high voltage transformer is Eledex/EDX-JK1016A- 3T, and the current one is YunLu/YL-1011AHEP-1. 3. Besides the high voltage transformer and magnetron change, the layout of PCB is changed as well. For the changes made to the device, all the test items were performed. Related Submittal(s)/Grant(s) No related submittal(s). Test Methodology All measurements contained in this report were conducted with MP-5, FCC Methods of Measurements of Radio Noise Emissions from ISM Equipment, February 1986. All measurements were performed at Bay Area Compliance Laboratory Corporation. The radiated testing was performed at an antenna-to-EUT distance of 3 meters. FCC Part 18 Page 3 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 Test Facility The test site used by Bay Area Compliance Laboratories Corp. (Shenzhen) to collect test data is located on the 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China. Test site at Bay Area Compliance Laboratories Corp. (Shenzhen) has been fully described in reports submitted to the Federal Communication Commission (FCC). The details of these reports have been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on December 06, 2010. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4-2009. The Federal Communications Commission has the reports on file and is listed under FCC Registration No.: 382179. The test site has been approved by the FCC for public use and is listed in the FCC Public Access Link (PAL) database. FCC Part 18 Page 4 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 OPERATING CONDITION/TEST CONFIGURATION Justification The EUT was operated at maximum (continuous) RF output power. The loads consisted of water in a glass beaker in the amounts specified in the test procedure. Equipment Modifications No modifications were made to the EUT tested. Support Equipment List and Details Manufacturer Description Model Serial Number Remark N/A Socket N/A 140217 N/A External Cable List and Details Cable Description Length (m) From/Port To Un-shielding Un-detachable AC Cable 0.9 EUT Socket Un-shielding Un-detachable AC Cable 1.0 Mains Socket Configuration of Test Setup Socket FCC Part 18 Page 5 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 Block Diagram of Test Setup Mains EUT Socket 10 cm Receptacle 1.0 Meter Non-conductive table 80 cm above Ground Plane 1.5 Meters FCC Part 18 Page 6 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 CONDUCTED EMISSIONS Applicable Standard FCC §18.307 Measurement Uncertainty Input quantities to be considered for conducted disturbance measurements maybe receiver reading, attenuation of the connection between LISN and receiver, LISN voltage division factor, LISN VDF frequency interpolation and receiver related input quantities, etc. Based on CISPR 16-4-2:2011, the expended combined standard uncertainty of conducted disturbance test at Bay Area Compliance Laboratories Corp. (Shenzhen) is shown as below. And the uncertainty will not be taken into consideration for the test data recorded in the report Port Expanded Measurement uncertainty AC Mains 3.26 dB (k=2, 95% level of confidence) CAT 3 3.70 dB (k=2, 95% level of confidence) CAT 5 3.86 dB (k=2, 95% level of confidence) CAT 6 4.64 dB (k=2, 95% level of confidence) EUT Setup FCC Part 18 Page 7 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 The setup of EUT is according with MP-5: 1986 measurement procedure. Specification used was with the FCC Part 18. The socket was connected to a 120 VAC/ 60Hz power source. EMI Test Receiver Setup The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz. During the conducted emission test, the EMI test receiver was set with the following configurations: Frequency Range IF B/W 150 kHz – 30 MHz 9 kHz Test Procedure Maximizing procedure was performed on the six (6) highest emissions of the EUT. All final data was recorded in the Quasi-peak and average detection mode. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Rohde & Schwarz EMI Test Receiver ESCS30 100176 2014-06-03 2015-06-03 3560.6650.12- Rohde & Schwarz LISN ENV216 2014-06-09 2015-06-09 101613-Yb Rohde & Schwarz Transient Limiter ESH3Z2 DE25985 2014-05-14 2015-05-14 Rohde & Schwarz LISN ESH3-Z5 100113 NCR NCR Rohde & Schwarz CE Test software EMC 32 V8.53.0 NCR NCR * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to requirements, traceable to National Primary Standards and International System of Units (SI). Test Results Summary According to the recorded data in following table, the EUT complied with the FCC PART 18, the worst margin reading as below: 12.6 dB at 0.158000 MHz in the Line conducted mode Refer to CISPR16-4-2:2011 and CISPR 16-4-1:2009, the measured level complies with the limit if Lm + U(Lm) ≤ Llim + Ucispr In BACL, U(Lm) is less than Ucispr, if Lm is less than Llim, it implies that the EUT complies with the limit. FCC Part 18 Page 8 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 Test Data Environmental Conditions Temperature: 23 ℃ Relative Humidity: 52 % ATM Pressure: 100.0 kPa The testing was performed by Joson Xiao on 2014-12-18. Test Mode: The max fan speed, max brightness and max output power AC 120V/60Hz, Line: EMI Auto Test L 90 80 70 QP 60 AV Level in dBμ 50 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Corrected Correction Frequency Limit Margin Detector Amplitude Factor (MHz) (dBμV) (dB) (PK/Ave./QP) (dBμV) (dB) 0.158000 52.9 19.2 65.6 12.6 QP 0.158000 41.6 19.2 55.6 14.0 Ave. 0.221500 44.8 19.3 62.8 18.0 QP 0.221500 32.0 19.3 52.8 20.8 Ave. 0.253500 43.7 19.3 61.6 18.0 QP 0.253500 32.6 19.3 51.6 19.0 Ave. 0.254500 43.5 19.3 61.6 18.1 QP 0.254500 32.6 19.3 51.6 19.0 Ave. 0.569330 38.2 19.3 56.0 17.8 QP 0.569330 30.8 19.3 46.0 15.2 Ave. 0.620790 36.9 19.3 56.0 19.1 QP 0.620790 29.4 19.3 46.0 16.6 Ave. FCC Part 18 Page 9 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 AC 120V/60Hz, Neutral: EMI Auto Test N 90 80 70 QP 60 AV Level in dBμ 50 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Corrected Correction Frequency Limit Margin Detector Amplitude Factor (MHz) (dBμV) (dB) (PK/Ave./QP) (dBμV) (dB) 0.181500 49.0 19.2 64.4 15.4 QP 0.181500 37.2 19.2 54.4 17.2 Ave. 0.197500 43.1 19.2 63.7 20.6 QP 0.197500 29.6 19.2 53.7 24.1 Ave. 0.274500 36.8 19.2 61.0 24.2 QP 0.274500 24.4 19.2 51.0 26.6 Ave. 0.309290 39.8 19.2 60.0 20.2 QP 0.309290 29.3 19.2 50.0 20.7 Ave. 0.470890 32.9 19.2 56.5 23.6 QP 0.470890 23.1 19.2 46.5 23.4 Ave. 0.597030 35.5 19.2 56.0 20.5 QP 0.597030 29.2 19.2 46.0 16.8 Ave. Note: 1) Corrected Amplitude = Reading + Correction Factor 2) Correction Factor =LISN VDF (Voltage Division Factor) + Cable Loss + Transient Limiter 3) Margin = Limit – Corrected Amplitude FCC Part 18 Page 10 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 RADIATION HAZARD MEASUREMENT Applicable Standard FCC §18.301 Test Data Environmental Conditions Temperature: 23 ℃ Relative Humidity: 52 % ATM Pressure: 100.0 kPa The testing was performed by Joson Xiao on 2014-12-18. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Rohde & Schwarz Signal Analyzer FSIQ26 8386001028 2014-11-12 2015-11-12 GW Instek Power Meter CL110034 1937A01046 2014-04-24 2015-04-24 A.H.System Horn Antenna SAS-200/571 135 2012-02-11 2015-02-10 MC Thermometer N/A N/A 2014-11-01 2015-11-01 Microwave Survey Holaday HI-1501 N/A 2014-11-01 2015-11-01 Meter * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to requirements, traceable to National Primary Standards and International System of Units (SI). Radiation Hazard Measurement Radiation leakage was measured in the as-received condition with the oven door closed using a microwave leakage meter. A 275 mL water load was placed in the center of the oven and the oven was operated at maximum output power. There was no microwave leakage exceeding a power level of 0.05 mW/cm2 observed at any point 5 cm or more from the external surface of the oven. A maximum of 1.0 mW/cm2 is allowed in accordance with the applicable Federal Standards. Hence, microwave leakage in the as-received condition with the oven door closed was below the maximum allowed. FCC Part 18 Page 11 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 Input Power Input power and current was measured using a power analyzer. A 1000 mL water load was placed in the center of the oven and the oven was operated at maximum output power. A 1000mL water load was chosen for its compatibility with the procedure commonly used by manufacturers to determine their input ratings. Input Voltage Input Current Measured Input Power Rated Input Power (VAC/Hz) (Amps) (Watts) (Watts) 120 15.48 1857.6 1800 Based on the measured input power, the EUT was found to be operating within the intended specifications. Load for Microwave Ovens For all measurements, the energy developed by the oven was absorbed by a dummy load consisting of a quantity of tap water in a beaker. If the oven was provided with a shelf or other utensil support, this support was in its initial normal position. For ovens rated at 1000 watts or less power output, the beaker contained quantities of water as listed in the following subparagraphs. For ovens rated at more than 1000 watts output, each quantity was increased by 50% for each 500watts or fraction thereof in excess of 1000 watts. Additional beakers were used if necessary. ● Load for power output measurement: 1000 milliliters of water in the beaker located in the center of the oven. ● Load for frequency measurement: 1000 milliliters of water in the beaker located in the center of the oven. ● Load for measurement of radiation on second and third harmonic: Two loads, one of 700 and the other of 300 milliliters, of water are used. Each load is tested both with the beaker located in the center of the oven and with it in the right front corner. The RF output power is rated at 1000 watts Load used for power output measurement = 1000 milliliters of water Load used for frequency measurement = 1000 milliliters of water Load used for harmonic measurement = 700 & 300 milliliters of water Load used for other measurement = 700 milliliters of water RF Output Power Measurement A cylindrical container of borosilicate glass is used for the test. It has a maximum thickness of 3 mm, an external diameter of approximately 190 mm and a height of approximately 90 mm. The mass of the container is determined. At the start of the test, the oven and the empty container are at ambient temperature. Water having an initial temperature of 10 ºC ± 1 ºC C is used for the test. The water temperature is measured immediately before it is poured into the container. A quantity of 1 000 g ± 5 g of water is added to the container and its actual mass obtained. The container is then immediately placed in the centre of the oven shelf, which is in its lowest normal position. The oven is operated and the time for the water temperature to attain 20 ºC ± 2 ºC is measured. The oven is then switched off and the final water temperature is measured within 60 s. FCC Part 18 Page 12 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 mw mc T0 T1 T2 t (g) (g) (ºC) (ºC) (ºC) (s) 1000 377.0 24.0 10.0 21.0 48 RF Output Power = (4.187x_1000 x( 21.0 –10)+0.55x377x( 21.0 - 24.0 )) / _48_= 946.56 Watts P is the microwave power output, in watts; mw is the mass of the water, in grams; mc is the mass of the container, in grams; To is the ambient temperature, in degrees Celsius; T1 is the initial temperature of the water, in degrees Celsius; T2 is the final temperature of the water, in degrees Celsius; t is the heating time, in seconds, excluding the magnetron filament heating-up time. The measurement output power was found to be less than 500 watts. Therefore, in accordance with Section 18.305 of Subpart-C, the measured out-of-band emissions were compared to the limit of 25μV/meter at a 300-meter measurement distance. The measured output power was found to exceed 500 watts. Therefore, in accordance with Section 18.305 of Subpart-C, the measured out-of-band emissions were compared with the limit calculated as following: LFS = 25*SQRT (Power Output/500) LFS = 25*SQRT 946.56 /500) LFS = 34.40 Where: LFS is the maximum allowable field strength for out-of-band emissions in μV/meter at a 300- meter measurement distance. Power Output is the measured output power in watts. LFS dBμV/m@300m dBμV/m@3m μV/m@300m 34.40 30.73 70.73 FCC Part 18 Page 13 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 Operating Frequency Measurement Variation in Operating Frequency with Time The operating frequency was measured using a spectrum analyzer. Starting with the EUT at room temperature, a 1000mL water load was placed in the center of the oven and the oven was operated at maximum output power. The fundamental operating frequency was monitored until the water load was reduced to 20 percent of the original load. The results of this test are as follows: Low Frequency High Frequency (MHz) (MHz) 2413.03 2475.95 Refer to data pages for details of the variation in operating frequency with time measurement. Marker 2 [T1] RBW 1 MHz RF Att 40 dB Ref Lvl 68.40 dB V VBW 3 MHz 137 dB V 2.47595190 GHz SWT 5 ms Unit dB V 137 2 [T1] 68.40 dB V A 130 2.47595190 GHz 1 [T1] 69.47 dB V 2.41302605 GHz 120 110 1MAX 1MA 100 2AP 4MAX 4MA 90 80 1 2 70 60 50 40 37 Center 2.45 GHz 10 MHz/ Span 100 MHz FCC Part 18 Page 14 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 Variation in Operating Frequency with Line Voltage The EUT was operated / warmed by at least 10 minutes of use with a 1000 mL water load at room temperature at the beginning of the test. Then the operating frequency was monitored as the input voltage was varied between 80 and 125 percent of the nominal rating. The results of this test are as follows: Line voltage varied from 96 VAC to 150 VAC. Low Frequency High Frequency (MHz) (MHz) 2412.63 2474.95 Please refer to following pages for details of the variation in operating frequency with line voltage measurement. Marker 2 [T1] RBW 1 MHz RF Att 40 dB Ref Lvl 69.16 dB V VBW 3 MHz 137 dB V 2.47494990 GHz SWT 5 ms Unit dB V 137 2 [T1] 69.16 dB V A 130 2.47494990 GHz 1 [T1] 69.65 dB V 2.41262525 GHz 120 110 1MAX 1MA 100 2AP 90 80 1 2 70 60 50 40 37 Center 2.45 GHz 10 MHz/ Span 100 MHz FCC Part 18 Page 15 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 RADIATED EMISSIONS Applicable Standard FCC §18.305 and FCC §18.309 Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are spectrum analyzer, cable loss, antenna factor calibration, antenna directivity, antenna factor variation with height, antenna phase center variation, antenna factor frequency interpolation, measurement distance variation, site imperfections, mismatch (average), and system repeatability. Based on CISPR 16-4-2:2011, the expended combined standard uncertainty of radiation emissions at Bay Area Compliance Laboratories Corp. (Shenzhen) is shown in below table. And the uncertainty will not be taken into consideration for the test data recorded in the report Frequency Polarity Measurement uncertainty 9 kHz~30MHz / 4.11 dB (k=2, 95% level of confidence) Horizontal 4.62 dB (k=2, 95% level of confidence) 30MHz~200MHz Vertical 4.54 dB (k=2, 95% level of confidence) Horizontal 4.84 dB (k=2, 95% level of confidence) 200MHz~1GHz Vertical 5.91 dB (k=2, 95% level of confidence) 1 GHz~6 GHz Horizontal / Vertical 4.68 dB (k=2, 95% level of confidence) Above 6 GHz Horizontal / Vertical 4.92 dB (k=2, 95% level of confidence) EUT Setup FCC Part 18 Page 16 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 The radiated emission tests were performed in the 3 meters chamber test site, using the setup accordance with the FCC MP - 5. The specification used was the FCC part 18 limits. The socket was connected to 120 VAC/60 Hz power source. EMI Test Receiver Setup and Spectrum Analyzer Setup The system was investigated from 30 MHz to 24.5 GHz. During the radiated emission test, the EMI test receiver and Spectrum Analyzer were set with the following configurations: Frequency Range RBW Video B/W IF B/W Detector 30MHz – 1000 MHz 100 kHz 300 kHz 120kHz QP 1MHz 3 MHz / PK Above 1 GHz 1MHz 10 Hz / Ave. Test Procedure Maximizing procedure was performed on the six (6) highest emissions to ensure that the EUT complied with all installation combinations. The EUT was in the normal (naïve) operating mode during the final qualification test to represent the worst results. All final data was recorded in the Quasi-peak detection mode from 30 MHz to 1 GHz, the average detection mode for above 1 GHz. FCC Part 18 Page 17 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 Test Equipment List and Details Calibration Calibration Manufacturer Description Model Serial Number Date Due Date HP Amplifier 8447E 1937A01046 2014-05-06 2015-05-06 Rohde & Schwarz EMI Test Receiver ESCI 101120 2014-11-03 2015-11-03 Sunol Sciences Broadband Antenna JB3 A111513 2014-06-18 2017-06-17 A.H. System Horn Antenna SAS-200/571 135 2012-02-11 2015-02-10 ALN- DUCOMMUN Pre-amplifier 991373-01 2014-08-03 2015-08-03 22093530-01 DUCOMMUN Horn Antenna ARH-4223-02 1007726-03 2013-08-03 2016-08-03 Rohde & Schwarz Signal Analyzer FSIQ26 837405/023 2014-08-22 2015-08-22 Mini Pre-amplifier ZVA-183-S+ 5969001149 2014-04-03 2015-04-03 TDK Chamber Chamber A 2# 2012-10-15 2015-10-15 TDK Chamber Chamber B 1# 2014-07-23 2015-07-22 R&S Auto test Software EMC32 V9.10 NCR NCR * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to requirements, traceable to National Primary Standards and International System of Units (SI). Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows: Corrected Amplitude = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude Test Results Summary According to the data in the following table, the EUT complied with the FCC Part 18, the worst margin reading as below: 24.16 dB at 8611.22 MHz in the Vertical polarization Refer to CISPR16-4-2:2011 and CISPR 16-4-1:2009, the measured level complies with the limit if Lm + U(Lm) ≤ Llim + Ucispr In BACL, U(Lm) is less than Ucispr, if Lm is less than Llim, it implies that the EUT complies with the limit. FCC Part 18 Page 18 of 19

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ141208552-00 Test Data and Plots Environmental Conditions Temperature: 23 ℃ Relative Humidity: 46 % ATM Pressure: 100.0 kPa The testing was performed by Joson Xiao on 2014-12-17. Test Mode: The max fan speed, max brightness and max output power 30 MHz – 24.5 GHz Corrected Antenna Turntable Correction Frequency Antenna Limit Margin Amplitude height position Factor Remark (MHz) Polarity (dBμV/m) (dB) (dBμV/m) (cm) (deg) (dB/m) 49.43 19.79 181.0 V 344.0 -19.3 70.73 50.94 QP 55.22 16.72 346.0 V 301.0 -20.1 70.73 54.01 QP 115.50 18.80 256.0 H 108.0 -13.6 70.73 51.93 QP 440.63 17.87 110.0 V 17.0 -10.0 70.73 52.86 QP 729.35 18.16 277.0 H 120.0 -5.2 70.73 52.57 QP 953.01 20.26 234.0 V 133.0 -1.9 70.73 50.47 QP 2082.16 27.59 200.0 V 223 3.23 70.73 43.14 Ave. 4372.75 40.65 140.0 V 154 11.63 70.73 30.08 Ave. 8611.22 46.57 100.0 V 190 0.74 70.73 24.16 Ave. 4426.85 38.44 130.0 H 149 0.74 70.73 32.29 Ave. 7835.67 43.36 160.0 H 122 -0.58 70.73 27.37 Ave. 8250.5 32.5 160.0 H 58 -0.58 70.73 38.23 Ave. 4915.6 43.72 100.0 H 62 0.74 70.73 27.01 Ave. ***** END OF REPORT ***** FCC Part 18 Page 19 of 19


Document Created: 2015-02-09 20:43:06
Document Modified: 2015-02-09 20:43:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC