Test Report

FCC ID: PQN91780TX27145

Test Report

Download: PDF
FCCID_2820437

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Report No.: SZEM151000665501 Email: ee.shenzhen@sgs.com Page: 1 of 19 1 Cover page FCC REPORT Application No.: SZEM1510006655CR(SGS SZ No.:T51510250061EM) Applicant: SpinMaster Toys Far East LTD. Manufacturer: Root Land Plastic Toy Factory Supplier: Spin Master Product Name: MEC ELT RC Racer CN GML 3pk M02 Phantom No.: 20072248 Style/Item No.: 91780, 91804, 91711, 91752, 1037143, 886350 Trade Mark: MEC Family No.: 91780 Sales Planning 6028127 Date Code: 50711ARL P.O./ Ref.No.: 91780, 6028127, 1037143 Finished Goods No.: 1037143 Numbers of Samples 28 sets samples, 8 pcs of full sprayed parts Submitted: Request Age Grading: 8+ Country of Origin: CHINA Country of Destination: US/CANADA/EU/AU FCC ID: PQN91780TX27145 Standards: 47 CFR Part 15, Subpart C (2014) Date of Receipt: 2015-10-30 Date of Test: 2015-11-6 to 2015-11-16 Date of Issue: 2015-11-17 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 2 of 19 2 Version Revision Record Version Chapter Date Modifier Remark 00 2015-11-17 Original Authorized for issue by: Tested By 2015-11-16 (Gebin Sun) /Project Engineer Date Prepared By 2015-11-17 (Joyce Shi) /Clerk Date Checked By 2015-11-17 (Eric Fu) /Reviewer Date “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZENM stooosesso 1 Page: 8 of 19 3 Test Summary Test hem Test Requirement Test methoa Reson Rodiated Emission 47 CPRPar15. 50000 Section 15.227 ansrcsa.to c2008) pass . Bandwitth |occupied . 37 orhs par 15, Sutpar d 0 ansices to cams Pass ~Inedscnent i se 5y h Consuy wipet o n Gerea Coein t Sevie id cvntat mon se o ncevate e aot n isoreectni ametfo donomenn ied t im fetemandCorotons utuievontis inctore Cetommnhym fornAt Eochh mhenic n Inacan of udie rden ono NeeCYR Revime R ind The nmconid euiety froegs a ie ofiie ony e wiha e ns Glara imieson i any Th Comsara wl eannnlay n t e Cien tdcmentdoe ot ecreace aton io Ataracian m eareaingal iosie and osicore nen e amacto covmers nds can eb maeaven onin ut Mirai ownspev t h Cmy ary Graaronncatcety o nteaie o trcwmito omnce l ie occmnen utd w ofertan my e reanaind o h olnnoro ti ie atvencn nane e mt wonnn in in reuitiew driytih dnclecedant c snswe wanes o tds ol >

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 4 of 19 4 Contents Page 1 COVER PAGE................................................................................................................................................... 1 2 VERSION ........................................................................................................................................................... 2 3 TEST SUMMARY ............................................................................................................................................. 3 4 CONTENTS ....................................................................................................................................................... 4 5 GENERAL INFORMATION ............................................................................................................................. 5 5.1 CLIENT INFORMATION ...................................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF EUT ....................................................................................................................... 5 5.3 TEST ENVIRONMENT AND MODE ....................................................................................................................... 6 5.4 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 6 5.5 TEST LOCATION ............................................................................................................................................... 6 5.6 TEST FACILITY ................................................................................................................................................. 7 5.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................................ 7 5.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ....................................................................................... 7 5.9 EQUIPMENT LIST .............................................................................................................................................. 8 6 TEST RESULT & MEASUREMENT DATA ................................................................................................. 12 6.1 ANTENNA REQUIRMENT ................................................................................................................................. 12 6.2 RADIATED EMISSIONS..................................................................................................................................... 13 6.3 OCCUPIED BANDWIDTH .................................................................................................................................. 17 7 PHOTOGRAPHS - EUT TEST SETUP ........................................................................................................ 19 7.1 RADIATED EMISSION ...................................................................................................................................... 19 8 PHOTOGRAPHS - EUT CONSTRUCTION DETAILS ............................................................................... 19 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 5 of 19 5 General Information 5.1 Client Information Applicant: SpinMaster Toys Far East LTD. Address of Applicant: 1113. 11 th Floor, Chinachen Golden Plaza, 77 Mody Road, Tsim Sha Tsui East Kowloon, Hong Kong Manufacturer: Root Land Plastic Toy Factory 5.2 General Description of EUT Product Name: MEC ELT RC Racer CN GML 3pk M02 Phantom No.: 20072248 Trade Mark: MEC RF Function (Frequency): 27.145MHz Power Supply: 9V DC (1x9V”6F22” Size Battery) for TX 4.5V DC (3x1.5V”AA” Size Battery) for RX Remark: Only the Phantom No.: 20072248 was tested in this report. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 6 of 19 5.3 Test Environment and Mode Operating Environment: Temperature: 24.0 °C Humidity: 52 % RH Atmospheric Pressure: 1020 mbar Test mode: Transmitting mode: Keep the EUT in transmitting mode. 5.4 Description of Support Units The EUT has been tested independent unit. 5.5 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch E&E Lab, No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 7 of 19 5.6 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 10m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-823, R-4188, T-1153 and C-2383 respectively. • FCC – Registration No.: 556682 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No.: 556682. • Industry Canada (IC) The 3m Semi-anechoic chambers and the 10m Semi-anechoic chambers of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-2, 4620C-3. None. 5.7 Abnormalities from Standard Conditions None. 5.8 Other Information Requested by the Customer None. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 8 of 19 \ 5.9 Equipment List RF connected test Cal. date Cal.Due Item Test Equipment Manufacturer Model No. Inventory No. (yyyy-mm-dd) date (yyyy-mm-dd) 1 DC Power Supply Zhao Xin RXN-305D SEL0117 2015-10-09 2016-10-09 Humidity/ 2 Temperature HYGRO ZJ1-2B SEL0033 2015-10-24 2016-10-24 Indicator Spectrum Rohde & 3 FSP SEL0154 2015-10-17 2016-10-17 Analyzer Schwarz 4 Coaxial cable SGS N/A SEL0178 2015-05-13 2016-05-13 5 Coaxial cable SGS N/A SEL0179 2015-05-13 2016-05-13 6 Barometer ChangChun DYM3 SEL0088 2015-05-13 2016-05-13 Rohde & 7 Signal Generator SML03 SEL0068 2015-04-25 2016-04-25 Schwarz 8 POWER METER R&S NRVS SEL0144 2015-10-09 2016-10-09 Beijin feihang 9 Attenuator TST-2-6dB SEL0205 2015-04-25 2016-04-25 taida “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 9 of 19 RE in Chamber Inventory Cal.Due date Item Test Equipment Manufacturer Model No. No. (yyyy-mm-dd) 3m Semi-Anechoic 1 ETS-LINDGREN N/A SEL0017 2016-05-13 Chamber Agilent 2 EMI Test Receiver N9038A SEL0312 2016-09-16 Technologies 3 EMI Test software AUDIX E3 SEL0050 N/A 4 Coaxial cable SGS N/A SEL0027 2016-05-13 5 Coaxial cable SGS N/A SEL0189 2016-05-13 6 Coaxial cable SGS N/A SEL0121 2016-05-13 7 Coaxial cable SGS N/A SEL0178 2016-05-13 BiConiLog Antenna 8 ETS-LINDGREN 3142C SEL0015 2017-11-15 (26-3000MHz) Double-ridged horn 9 ETS-LINDGREN 3117 SEL0006 2018-10-17 (1-18GHz) Pre-amplifier Agilent 10 8447D SEL0053 2016-05-13 (0.1-1300MHz) Technologies Compliance Pre-Amplifier 11 Directions Systems PAP-0126 SEL0168 2016-10-17 (0.1-26.5GHz) Inc. 12 Barometer ChangChun DYM3 SEL0088 2016-05-13 13 DC Power Supply Zhao Xin RXN-305D SEL0117 2016-10-09 Humidity/ 14 Temperature Shanhai Qixiang ZJ1-2B SEL0103 2016-10-24 Indicator Signal Generator 15 Rohde & Schwarz SMR27 SEL0067 2016-05-13 (10M-27GHz) 16 Loop Antenna Beijing Daze ZN30401 SEL0203 2016-05-13 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 10 of 19 RE in Chamber Inventory Cal.Due date Item Test Equipment Manufacturer Model No. No. (yyyy-mm-dd) 10m Semi-Anechoic 1 SAEMC FSAC1018 SEL0303 2016-08-01 Chamber 2 EMI Test Receiver Rohde & Schwarz ESIB26 SEL0023 2016-05-13 3 EMI Test software AUDIX E3 SEL0050 N/A 4 Coaxial cable SGS N/A SEL0288 2016-05-13 5 Coaxial cable SGS N/A SEL0275 2016-05-13 6 Coaxial cable SGS N/A SEL0274 2016-05-13 BiConiLog Antenna 7 Schwarzbeck VULB9160 SEL0308 2018-10-17 (30M-1GHz) BiConiLog Antenna 8 Schwarzbeck VULB9160 SEL0309 2018-10-17 (30M-1GHz) Horn Antenna 9 Rohde & Schwarz HF907 SEL0311 2018-06-14 (1-18GHz) Sonoma Instrument 10 Pre-amplifier 310N SEL0298 2016-05-13 Co Black Diamond BDLNA-011 11 Low Noise Amplifier SEL0319 2016-10-09 Series 8-352810 12 .Loop Antenna ETS-LINDGREN 6502 SEL0802 2016-08-14 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 11 of 19 Conducted Emission Inventory Cal. date Cal.Due date Item Test Equipment Manufacturer Model No. No. (yyyy-mm-dd) (yyyy-mm-dd) ZhongYu 1 Shielding Room GB-88 SEL0042 2015-05-13 2016-05-13 Electron Rohde & 2 LISN ENV216 SEL0152 2015-10-09 2016-10-09 Schwarz 3 LISN ETS-LINDGREN 3816/2 SEL0021 2015-05-13 2016-05-13 Fischer Custom FCC-TLIS 4 8 Line ISN Communications SEL0162 2015-08-30 2016-08-30 N-T8-02 Inc. Fischer Custom FCC-TLIS 5 4 Line ISN Communications SEL0163 2015-08-30 2016-08-30 N-T4-02 Inc. Fischer Custom FCC-TLIS 6 2 Line ISN Communications SEL0164 2015-08-30 2016-08-30 N-T2-02 Inc. EMI Test Rohde & 7 ESCI SEL0022 2015-05-13 2016-05-13 Receiver Schwarz 8 Coaxial Cable SGS N/A SEL0025 2015-05-13 2016-05-13 9 DC Power Supply Zhao Xin RXN-305D SEL0117 2015-10-09 2016-10-09 Humidity/ 10 Temperature Shanhai Qixiang ZJ1-2B SEL0103 2015-10-24 2016-10-24 Indicator 11 Barometer Chang Chun DYM3 SEL0088 2015-05-13 2016-05-13 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 12 of 19 6 Test Result & Measurement Data 6.1 Antenna Requirment Standard Requirement: 47 CFR Part 15C Section 15.203 15.203 Requirement: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. EUT Antenna: “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 13 of 19 6.2 Radiated Emissions Test Requirement: 47 CFR Part 15C Section 15.227 Test Method: ANSI C63.10: 2009 Test Site: 3m (Semi-Anechoic Chamber) ERP Limit: Carrier Power will not exceed 80dBuV/m at 3m (Average). Receiver Setup: Frequency Detector RBW VBW Remark 0.009MHz-0.090MHz Peak 10kHz 30kHz Peak 0.009MHz-0.090MHz Average 10kHz 30kHz Average 0.090MHz-0.110MHz Quasi-peak 10kHz 30kHz Quasi-peak 0.110MHz-0.490MHz Peak 10kHz 30kHz Peak 0.110MHz-0.490MHz Average 10kHz 30kHz Average 0.490MHz -30MHz Quasi-peak 10kHz 30kHz Quasi-peak 30MHz-1GHz Quasi-peak 100 kHz 300kHz Quasi-peak Peak 1MHz 3MHz Peak Above 1GHz Peak 1MHz 10Hz Average Limit: Field strength Limit Measurement Frequency Remark (microvolt/meter) (dBuV/m) distance (m) 0.009MHz-0.490MHz 2400/F(kHz) - - 300 0.490MHz-.705MHz 24000/F(kHz) - - 30 1.705MHz-30MHz 30 - - 30 30MHz-88MHz 100 40.0 Quasi-peak 3 88MHz-216MHz 150 43.5 Quasi-peak 3 216MHz-960MHz 200 46.0 Quasi-peak 3 960MHz-1GHz 500 54.0 Quasi-peak 3 Above 1GHz 500 54.0 Average 3 Note: 15.35(b), Unless otherwise specified, the limit on peak radio frequency emissions is 20dB above the maximum permitted average emission limit applicable to the equipment under test. This peak limit applies to the total peak emission level radiated by the device. Test Procedure: a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned to heights 1 meter) and the rotatable “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 14 of 19 table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re- tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. g. The radiation measurements are performed in X, Y, Z axis positioning. And found the X axis positioning which it is worse case, only the test worst case mode is recorded in the report. Test Setup: Figure 1. Below 30MHz Figure 2. 30MHz to 1GHz Test Mode: Transmitting mode. Instruments Used: Refer to section 5.10 for details. Test Result: Pass 27.145MHz Mode Test Procedure: For testing performed with the loop antenna, testing was performed in accordance to ANSI C63.10: 2009. The center of the loop was positioned 1 m above the ground and positioned with its plane vertical at the specified distance from the EUT. During testing the loop was rotated about its vertical axis for maximum response at each azimuth and also investigated with the loop positioned in the horizontal plane. Test Result: Intentional emission Test Frequency Peak (dBµV/m) Limits Margin (dB) (MHz) Vertical Horizontal (dBµV/m) Vertical Horizontal 27.145 68. 49 60. 46 100. 0 -31.51 -39.54 Test Frequency Average (dBµV/m) Limits Margin (dB) (MHz) Vertical Horizontal (dBµV/m) Vertical Horizontal 27.145 62. 91 52. 84 80. 0 -17.09 -27.16 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 15 of 19 Out of Band Emissions Vertical “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 16 of 19 Horizontal Remark: 1) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic equation with a sample calculation is as follows: Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Preamplifier Factor 2) The disturbance below 30MHz was very low, and the above harmonics were the highest point could be found when testing, so only the above harmonics had been displayed. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 17 of 19 6.3 Occupied Bandwidth Test Requirement: 47 CFR Part 15C Section 15.215 (C) Test Method: ANSI C63.10: 2009 Limit: Operation within the band 26.960 – 27.280 MHz Requirement : Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §§15.217 through 15.257 and in subpart E of this part, must be designed to ensure that 20dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equip compliance with the 20dB attenuation specification may base on measurement at the intentional radiator’s antenna output terminal unless the intentional radiator uses a permanently attached antenna, in which case compliance shall be.deomonstrated by measuring the radiated emissions. Test Setup: Test Mode: Transmitting mode. Instruments Used: Refer to section 5.10 for details. Test Result: Pass “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 18 of 19 Test Result: * RBW 1 kHz Marker 1 [T1 ] * VBW 3 kHz -49.53 dBm Ref -30 dBm * Att 0 dB SWT 50 ms 27.145032051 MHz -30 Offset 1.5 dB OBW 10.977564103 kHz Temp 1 [T1 OBW] -74.87 dBm A -40 27.139503205 MHz 1 PK 1 Temp 2 [T1 OBW] MAXH -50 -74.11 dBm LVL 27.150480769 MHz -60 -70 T2 T1 -80 3DB -90 -100 -110 -120 -130 Center 27.14503205 MHz 5 kHz/ Span 50 kHz “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM151000665501 Page: 19 of 19 7 Photographs - EUT Test Setup 7.1 Radiated Emission 8 Photographs - EUT Construction Details Refer to Appendix A - Photographs of EUT Constructional Details for SZEM1510006655CR. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”


Document Created: 2015-11-19 05:51:27
Document Modified: 2015-11-19 05:51:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC