User Manual

FCC ID: PQN52116RXB2G4

Users Manual

Download: PDF
FCCID_3579414

6+ YEA R S TROUBLESHOOTING If normal function of the product is disturbed or interrupted, strong electro-magnetic interference may be causing the issue. To reset product, turn the head and body completely off, then turn it back on. If normal operation does not resume, move the I NSTRU CTI ON product to another location and try again. To ensure normal performance, charge the GU I DE batteries, as low batteries may not allow full function. HEAD HERO DROID CONDITION RED LED 1 BLUE LED 2 WHITE LED (VR) 3 ™ Low Battery (Head) X Flashing - 1Hz OFF Low Battery (Body) Flashing - 1 Hz X OFF 3 1 2 System Error Flashing - 2Hz Flashing - 2Hz Flashing - 2Hz WHITE RED BLUE BODY RED CONDITION RED LED 1 Head & Body Not Linked Fast Flashing Low Battery (Body) Flashing - 1Hz RESPONDS TO ENGLISH ONLY TIP: If BB-8 is acting up, try a reset. Turn body and head completely off, then turn both power switches back on. If this does not work make sure the head and body are fully 3x AAA(LR03) charged then try again. BATTERIES NOT INCLUDED IMPORTANT INFORMATION Remove all packaging before use. Retain this information, addresses and phone numbers for future reference. Please read User Instruction Guide for additional 1x Ni-MH1800 mAh BATTERY INCLUDED important information. Content may vary from pictures. An adult should periodically check this toy to ensure no damage or hazards exist, if so, remove from use. Children should be supervised during play. Keep away from obstacles and electrical hazards. 1x 400mAh/3.7V Lipo CARE AND MAINTENANCE BATTERY INCLUDED Always remove batteries from the controller when it is not being used for a long period of time (controller/charger only). Wipe the toy gently with a clean damp cloth. Keep the toy away from direct heat. Do not submerge the toy in water. This can damage the electronic assemblies. Turn off the power on the controller CAUTION: This toy contains inaccessible magnets. when not in use. Keep away from electronic and medical devices. Exposed magnets, if inhaled or swallowed can stick together or to Charge the main body (NiMH battery) every 6 months for battery maintenance. other metal objects, and cause serious or fatal injury. For additional help videos, TM & © Spin Master Ltd. All rights reserved. Tous droits réservés. SPIN MASTER LTD., 450 FRONT STREET WEST, TORONTO, ON M5V 1B6 CANADA Imported into EU by/Importé dans l’UE par go to www.herodroidbb8.com ? DO NOT RETURN TO THE STORE. NORTH AMERICA – 1-800-622-8339, SPIN MASTER INTERNATIONAL, S.A.R.L., 20 RUE DES PEUPLIERS, L-2328, LUXEMBOURG + www. CUSTOMERCARE@SPINMASTER.COM Customer Service: 1-800-622-8339 Email: customercare@spinmaster.com © & ™ Lucasfilm Ltd. WWW.SPINMASTER.COM T52116_0001_20073849_NEN_IS_R3 12

TABLE OF CONTENTS CONTENTS 6+ YEARS INSTRUCTION GUIDE 6+ YEARS HERO DROID CAUTIONS.................................................................... 2 ™ HERO DROID 1 BB-8 DROID HEAD CONTENTS ................................................................... 3 RESPONDS TO ENGLISH ONLY 3x AAA(LR03) 1 SMALL BATTERIES NOT INCLUDED INDICATOR LIGHTS ...................................................... 3 1x Ni-MH1800 ANTENNA mAh BATTERY INCLUDED 1x 400mAh/3.7V BATTERY REMOVAL & INSTALLATION .......................... 4 Lipo BATTERY INCLUDED CAUTION: This toy contains inaccessible magnets. Keep away from electronic and medical devices. Exposed magnets, if inhaled or swallowed can stick together or to CHARGING (BB-8 BODY)............................................ 5 other metal objects, and cause serious or fatal injury. ? DO NOT RETURN TO THE STORE. NORTH AMERICA – 1-800-622-8339, QUICK STAR T GUIDE + www. CUSTOMERCARE@SPINMASTER.COM WWW.SPINMASTER.COM CHARGING (BB-8 HEAD) ............................................ 6 1 LARGE ASSEMBLY..................................................................... 7 ANTENNA 1 Quick-Start Guide 1 Instruction Guide CHARGE PORT FUNCTIONS (BB-8 BODY) .................. 7 CHARGE PORT FUNCTIONS (BB-8 HEAD)................... 7 REMOTE CONTROL FUNCTIONS.................................. 8 GET STARTED................................................................ 9 PLAY MODES................................................................ 9 1 MICRO USB CHARGER CABLE FOR BB-8 DROID HEAD REMOTE CONTROL MODE .......................................... 9 VOICE COMMAND MODE .......................................... 9 FOLLOW ME ................................................................. 10 BB-8 MOODS ............................................................... 10 1 BB-8 DROID BODY ANIMATION BUTTON ................................................... 10 1 REMOTE CONTROL SLEEP MODE ................................................................ 10 1 WALL MOUNT CHARGER FCC INFORMATION..................................................... 11 FOR BB-8 DROID BODY SAFETY INFORMATION ................................................ 11 INDICATOR LIGHTS TROUBLE SHOOTING ................................................... 12 BB-8 HEAD BB-8 BODY IMPORTANT INFORMATION......................................... 12 CARE AND MAINTENANCE ......................................... 12 RED Power Light Blue Light RED = ON Indicates power status of BB-8 (see NO LIGHT = OFF table on page 12 for details) CAUTIONS Before first use: Read the user's information together with your child. INDOOR TOY. CAUTION: Using item outdoors may cause damage to surface finish and function. Use on smooth level surface. Do not use near or on incline. Do not use near or on stairs. Abrasive surfaces will damage product. 4 Special Note to Adults: Regularly examine for damage to the plug, enclosure and other parts. In the event of any damage, the toy must not be used with the controller White Light until the damage has been repaired. White = Ready for Voice Commands NOTE: If normal function of the product is disturbed or interrupted, strong electro- 4. RED LIGHT – ON indicates NO Light = Not ready for Voice Commands magnetic interference may be causing the issue. To reset product, turn it completely that there is power to the off, then turn it back on. If normal operation does not resume, move the product to Droid’s body. OFF indicates TIP: Look for the WHITE LIGHT before giving BB-8 that there is no power to the another location and try again. To ensure normal performance, change or re-charge voice commands! the batteries, as low batteries may not allow full function. Droid’s body. 2 3

BATTERY REMOVAL AND INSTALLATION CHARGING (BB-8 BODY) 1. Locate the battery door on the 1. Locate the Charging Port Door on the BB-8 body section. remote control. 2. Open the battery door with a philips screwdriver (not included). If used or spent 2 1 batteries are present, remove these batteries from the unit by pulling up on one end of each battery. DO NOT remove or 1 2. Open the Charging Port Door. 3. Move the Power Switch to the OFF Position. Red power indicator light will go OFF. install batteries using sharp or metal tools. RED POWER 2 3 INDICATOR LIGHT 3 4. Plug the AC/DC wall mount charger (9V DC 700mA, 6.3W) into the wall outlet. 5. Plug the Charging Cord into the Charging Port in BB-8. Red Light on wall mount charger will indicate charging is in progress. No light shows in BB-8 Charging port area. 3. Install 3 new “AAA”(LR03) batteries (not included) as shown in the polarity diagram (+/-) inside the battery compartment. 4. Replace battery door securely. 4 5 5. Check your local laws and regulations for correct recycling and/or battery disposal. Battery Safety Information: • Requires 3 X 1.5V “AAA” (LR03) batteries • Only batteries of the same or equivalent type RED CHARGE LIGHT: (NOT INCLUDED). as recommended are to be used. SOLID = CHARGING • Batteries are small objects. • DO NOT incinerate used batteries. FLASHING = FULLY CHARGED • Replacement of batteries must be done by adults. • DO NOT dispose of batteries in fire, • Follow the polarity (+/-) diagram in the battery as batteries may explode or leak. 6. Charge around 3 hours, or until red charge light flashes. compartment. • DO NOT mix old and new batteries or types of batteries (i.e. alkaline/standard/rechargeable). 7. Unplug the Charging Cord from the Charging Port. • Promptly remove dead batteries from the toy. • Dispose of used batteries properly • Using rechargeable batteries is not recommended 8. Unplug the AC/DC wall mount charger from the wall outet. • Remove batteries for prolonged storage. due to possible reduced performance. Rechargeable 9. Close the Charging Port Door. batteries are only to be charged under adult supervision. Replaceable-rechargeable batteries are to be removed from the toy before being charged. NOTE: If the red light does not show on the wall mount charger make sure • DO NOT recharge non-rechargeable batteries. the plug is fully inserted into the charge port and the power switch on the body • DO NOT short-circuit the supply terminals. is set to the OFF position. Alternative Charges Europe/ Korea Australia United Kingdom 4 5

CHARGING (BB-8 HEAD) ASSEMBLY 1. Locate the Charging Port Door on the BB-8 head section. 1. Connect the Antenna to the Top of BB- 8. 2. Place BB-8 head on top of the body. 3. Assembly complete. 1 1 2 3 2. Open the Charging Port Door. 3. Move the Power Switch to the OFF Position. Charging indicator light will go OFF. NOTE: You may need to twist BB-8’s head to lock it into place. If BB-8’s head is not locked into position it will lean to the side and the head may fall off easily. 2 3 CHARGE PORT FUNCTIONS (BB-8 DROID BODY) CHARGING POWER INIDCATOR LIGHT INDICATOR LIGHT RED = ON NO LIGHT = OFF CHARGING PORT 4. Plug the micro USB cable into the Charging Port. POWER SWITCH 5. Plug the USB Cable into an appropriate source. OFF POSITION RED Light will indicate charging is in progress. GREEN Light will indicate full charge. ON POSITION 4 CHARGING INDICATOR LIGHT: RED = CHARGING GREEN = FULLY CHARGED NO LIGHT = NOT CHARGING CHARGE PORT FUNCTIONS (BB-8 DROID HEAD) POWER SWITCH RC CHANNEL SELECTOR* A POSITION OFF POSITION NOTE: Cable is for charging 5 B POSITION only and will NOT transfer data. ON POSITION C POSITION CHARGING INDICATOR 6. Charge around 1 hour, or until LIGHT charge light turns GREEN. CHARGING PORT RED = CHARGING 7. Unplug the micro USB cable GREEN = FULLY CHARGED NO LIGHT = NOT CHARGING from the Charging Port. 8. Unplug the USB Cable *The RC CHANNEL SELECTOR must be in the same position as on the REMOTE CONTROL. It may be from its source. changed to a different channel when playing with a friend who has another BB-8, or similar 9. Close the Charging Port Door. product. This will let you maintain control of your BB-8 and not interfere with the other BB-8. 6 7

REMOTE CONTROL FUNCTIONS GET STARTED FRONT SIDE 1. Open the Charging Port Door on the BB-8 Droid body. THROTTLE LEVER ANIMATION BUTTON (Left/Right) 2. Move the Power Switch to the ON position. Red power indicator light will go ON. (Animate/Reverse Controls) Close the Charge Port Door. 3. Open the Charging Port Door on the BB-8 Droid head. THROTTLE LEVER (Forward/Backwards) 4. Move the Power Switch to the ON position. Red power light will go ON. Close the Charge Port Door. 5. BB-8 will calibrate before normal play modes begin. 1 2 3 4 5 NOTE: Keep BB-8 still and on a flat surface when powering on. PLAY MODES BB-8 has 3 PLAY MODES: REMOTE CONTROL (RC) – Direct control of BB-8’s movements IR LED VOICE COMMAND – Verbally interact with BB-8 FOLLOW ME – BB-8 will follow you IR LED POWER INDICATOR POWER SWITCH MODE SELECTOR REMOTE CONTROL MODE RC MODE NOTE: To Animate BB-8 press the animation button once. 1. Set the Remote Control to RC Mode. To reverse controls press and hold the animation OFF (VOICE COMMAND MODE) 2. Move the Throttle to move BB-8. button for 2 seconds. FOLLOW ME MODE REMOTE CONTROL 1 2 REAR SIDE RC CHANNEL SELECTOR* A POSITION B POSITION NOTE: Maintain a distance within 40 feet, between the Remote Control and BB-8. C POSITION VOICE COMMAND MODE BB-8 COME HERE - CLOSER 1. Turn the remote OFF while BB-8 is HELLO STORMTROOPER BATTERY DOOR BELT CLIP powered ON. KYLO REN STAND GUARD* 2. White light indicates that BB-8 is MOVE BALL WHERE IS POE? listening for Voice Commands. GO TO SLEEP HAVE YOU SEEN REY? 3. Speak clearly to BB-8, HOW ARE YOU? DROID PLEASE using the phrases listed at right. *NOTE: BB-8 will start scanning the room for intruders. Await BB-8’s reactions. If any are detected, BB-8 will alert you. RESPONDS TO ENGLISH ONLY 1 2 3 8 9

FCC STATEMENT: This product complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: FOLLOW ME MODE (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for Class B digital devices 1. Clip the Remote Control to your side and pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference to radio set to FOLLOW ME Mode. communications. Because this toy generates, uses, and can radiate radio frequency energy, if not installed and used in accordance 2. Keeping controller around 5'-6'. Facing with the instruction, may cause harmful interference to radio communication. However there can be no guarantee that interference will BB-8 begin walking slowly. not occur. If this toy does cause interference to radio or television reception (you can check this by turning the toy off and on while listening for the interference), one or more of the following measures may be useful: 1 2 3. BB-8 will move toward • Reorient or relocate the receiving antenna the Remote Control. • Increase the separation between the toy and the radio or the TV CAUTION: • Consult the dealer or an experienced TV-radio technician for help. Do not walk down stairs, Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. BB-8 will follow and NOTE: Changes, adjustments or modifications to this unit, including but not limited to, replacement of any transmitter component could get damaged. (crystal, semiconductor, etc) could result in a violation of FCC rules under part 15 and/or 95 and must be expressly approved by Spin Master Ltd or they could void the user’s authority to operate the equipment. Shielded cables must be used with this unit to insure NOTE: Use the follow me mode only in large areas to avoid running into walls or other objects. If BB-8 compliance with the Class B FCC limits. stops moving towards your and begins to beep move closer so BB-8 can regain the remote CANADIAN Class B statement: This device complies with Industry Canada licence-exempt RSSs standard(s). Operation is control IR LED signal. Make sure you do not cover the IR LED’s on the remote control. subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. BB-8 MOODS CAN ICES-3(B)/NMB-3(B) BB-8 may randomly display any of the following six moods: BOLD; SAD; SASSY; HAPPY; SCARED; CURIOUS POWER ADAPTER SAFETY INFORMATION - The transformer is not a toy and should be connected to the wall outlet by an adult. It should be periodically examined for conditions RC/ ANIMATION BUTTON 4. Press and hold the Animation Button that may result in the risk of fire, electrical shock or injury to persons, such as damage to the cord, plug, blades, housing or other parts, and in the event of such conditions, the transformer must not be used until the damage is repaired. The cord of this transformer cannot 1. Set the Remote Control to RC Mode. for 2 seconds. be replaced; if the cord is damaged, dispose of the transformer in accordance with your local electrical product recycling regulations. 2. Press the Animation Button once. 5. BB-8’s head will turn in the opposite direction. - Transformers and power supplies for toys are not intended to be used as toys, and the use of these products by children shall be 3. BB-8 will randomly animate. 6. The controls over BB-8 will reverse. under the full supervision of parents. - The toy must be used only with the recommended transformer. - The toy is not to be connected to more than the recommended number of power supplies. - Toys to be cleaned with a liquid are to be disconnected from the transformer before cleaning. - To clean transformer, disconnect it from the wall and clean with a cloth dampened with water. Do not immerse in water or use 1 2 3 4 5 6 soap or other chemicals. Allow to dry before reusing. Do not connect to the AC outlet if wet or damaged. - AC Adapter Electrical Ratings: US, CAN Input: ~ 120V AC, 60Hz, 300mA. UK Input: ~ 240V, 50Hz. Australia and New Zealand Input: ~ 240V, 50 Hz. Output: 9V DC, 700mA - Batteries are only to be charged by adults or by children at least 8 years old. SLEEP MODE This toy is equipped with LiPo and NiMH batteries. SPECIAL BATTERY INSTRUCTIONS: - Never charge battery unattended. 1. After 3 - 5 minutes of no interaction, the Droid will go into SLEEP MODE. In SLEEP - Charge battery in an isolated area. Keep away from flammable materials. MODE, say “BB-8” to reactivate the Droid. Press the Controller's Direction Knob OR - Do not expose to direct sunlight. There is a risk of the batteries exploding, overheating, or igniting. the Animation Button to reactivate. - Do not disassemble, modify, heat, or short circuit the batteries. 2. After 5 minutes, the Droid will go into Power Down Mode. - Do not place them in fires or leave them in hot places. - Do not drop or subject to strong impacts. 3. Open both Charge Ports. - Do not allow the batteries to get wet. 4. Move the Power Switches to the OFF Position. - Only charge the batteries with the specified Spin Master™ battery charger. 5. Move the Power Switches back to the ON Position. Droid will re-activate. - Only use the batteries in the device specified by Spin Master™. - Carefully read the instruction guide and use the batteries correctly. 3 4 5 - In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher for the battery. - Batteries must be recycled or disposed of properly. Special Battery Removal Instruction for LiPO, NiMH: Product Battery Removal Instructions: Internal battery is factory installed, product disassembly and battery removal must be performed by an adult. Do not puncture, cut, tear, compress or deform product during disassembly. Ensure product is turned off, then use a screw driver to remove all screws. Separate product body halves to expose internal electronics. When battery is visible in its entirety 3 4 5 use scissors to cut a single battery wire, immediately wrap the cut wire end with tape to isolate it, repeat until all battery wires are cut and isolated, and the battery is free from the rest of the product. Dispose of battery in accordance with your local battery recycling or disposal laws. NOTE: Opening of product and/or removal of battery will render product inoperative and voids manufacturer warranties, dispose of remaining product components in accordance with local laws. 10 11


Document Created: 2017-06-09 10:47:14
Document Modified: 2017-06-09 10:47:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC