Test Report

FCC ID: PQN44422TX27MHZ

Test Report

Download: PDF
FCCID_1560397

                                        TEST REPORT

                             Report No.: HK11090666-1

                     Spin Master Toys Far East Limited


                                          Application
                                              For
                                          Certification
                                        (Original Grant)

                          (FCC ID: PQN44422TX27MHZ)

                                            Transmitter




Prepared and Checked by:                                    Approved by:

                                                                                          Digitally signed by Terry
                                                                                          Chan
                                                                                          Location: Intertek Testing
                                                                                          Services Hong Kong Ltd.
Signed On File
Wong Cheuk Ho, Herbert                                      Chan Chi Hung, Terry
Engineer                                                    Assistant Supervisor
                                                            Date: October 13, 2011




                            Intertek Testing Services Hong Kong Ltd.
                         2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong.
               Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com


                        INTERTEK TESTING SERVICES



                         GENERAL INFORMATION

                  Spin Master Toys Far East Limited
              BRAND NAME: Spin Master Ltd, MODEL: 44422
                      FCC ID: PQN44422TX27MHZ

Grantee:                    Spin Master Toys Far East Limited
Grantee Address:            Room 1113, 11/F., Chinachem Golden Plaza,
                            77 Mody Road, Tsim Sha Tsui East,
                            Kowloon, Hong Kong.
Contact Person:             Allen Yang
Tel:                        N/A
Fax:                        N/A
e-mail:                     alleny/georgew@spinmaster.com
Manufacturer:               First Union Toys Co., Ltd
Manufacturer Address:       Gong Lian Industrial Estate,
                            Wan Jiang, Dong Guan City, China.
Brand Name:                 Spin Master Ltd
Model:                      44422
Additional Model:           1021361/6016876, 1023913/6018296,
                            1023915/6018296, 1023996/6018354,
                            1023999/6018357, 1024001/6018360
Type of EUT:                Transmitter
Description of EUT:         NASCAR 1/24TH RF (44422)
                            AHN RDC NASCAR 1:24th RF Ast GTL 4pk
                            M01(1021361/6016876),
                            AHN RDC NASCAR1:24thScl Ast GTL 2pk
                            M01A(1023913/6018296),
                            AHN RDC NASCAR1:24thScl Ast GTL 2pk
                            M01B(1023915/6018296),
                            AHN RDC NASCAR1:24DaleJRsRFAst
                            GTL4pkM01(1023996/6018354),
                            AHN RDC NASCAR1:24th Jimmy RF GTL
                            4pkSLD(1023999/6018357),
                            AHN RDC NASCAR1:24th Tony RF GTL
                            4pkSLD(1024001/6018360)
Serial Number:              N/A
FCC ID:                     PQN44422TX27MHZ
Date of Sample Submitted:   September 19, 2011
Date of Test:               September 21, 2011
Report No.:                 HK11090666-1
Report Date:                October 13, 2011
Environmental Conditions:   Temperature: +10 to 40°C
                            Humidity: 10 to 90%
Report No.: HK11090666-1
FCC ID: PQN44422TX27MHZ
                                                                        i


                             INTERTEK TESTING SERVICES



                              SUMMARY OF TEST RESULT

                      Spin Master Toys Far East Limited
                  BRAND NAME: Spin Master Ltd, MODEL: 44422
                          FCC ID: PQN44422TX27MHZ

         TEST SPECIFICATION                                REFERENCE              RESULTS
Maximum Peak Output Power                           15.247(b), (c) / RSS-210 A8.4   N/A
Hopping Channel Carrier Frequencies                 15.247(e) / RSS-210 A8.1        N/A
Separation
20dB Bandwidth of the Hopping Channel               15.247(a) / RSS-210 A8.1                   N/A
Number of Hopping Frequencies                       15.247(e) / RSS-210 A8.1                   N/A
Average Time of Occupancy of                        15.247(e) / RSS-210 A8.1                   N/A
Hopping Frequency
Antenna Conducted Spurious Emissions                15.247(d) / RSS-210 A8.5                   N/A
Radiated Spurious Emissions                         15.247(d) / RSS-210 A8.5                   N/A
RF Exposure Compliance                              15.247(i) / RSS-Gen 5.5                    N/A
Transmitter Power Line Conducted                    15.207 / RSS-Gen 7.2.2                     N/A
Emissions
Transmitter Field Strength                          15.227 / RSS-310 3.8                      Pass
Transmitter Field Strength                          15.229 / RSS-210 A2.7                     N/A
Transmitter Field Strength,                         15.231(a) / RSS-210 A1.1.1                N/A
Bandwidth and Timing Requirement
Transmitter Field Strength,                         15.231(e) / RSS-210 A1.1.5                 N/A
Bandwidth and Timing Requirement
Transmitter Field Strength and                      15.239 / RSS-210 A2.8                      N/A
Bandwidth Requirement
Transmitter Field Strength and                      15.249 / RSS-210 A2.9                      N/A
Bandwidth Requirement
Transmitter Field Strength and                      15.235 / RSS-310 3.9                       N/A
Bandwidth Requirement
Receiver / Digital Device Radiated                  15.109 / ICES-003                          N/A
Emissions
Digital Device Conducted Emissions                  15.107 / ICES-003                          N/A

Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is
         considered sufficient to comply with the pervisions of this section.
      2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained
         within the frequency band designated (mentioned as above) which the EUT operated. The
         effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and
         frequency stability over excepted variations in temperature and supply voltage were considered.




Report No.: HK11090666-1
FCC ID: PQN44422TX27MHZ
                                                                                                       ii


                                   INTERTEK TESTING SERVICES



                                              Table of Contents

1.0   General Description ............................................................................................ 1
  1.1  Product Description ........................................................................................... 1
  1.2  Related Submittal(s) Grants ............................................................................... 1
  1.3  Test Methodology .............................................................................................. 1
  1.4  Test Facility ....................................................................................................... 1

2.0   System Test Configuration ................................................................................. 2
  2.1   Justification........................................................................................................ 2
  2.2   EUT Exercising Software ................................................................................... 2
  2.3   Special Accessories........................................................................................... 2
  2.4   Equipment Modification...................................................................................... 2
  2.5   Measurement Uncertainty .................................................................................. 2
  2.6   Support Equipment List and Description............................................................. 2

3.0   Emission Results ................................................................................................ 3
  3.1  Field Strength Calculation .................................................................................. 3
  3.2  Radiated Emission Configuration Photograph .................................................... 4
  3.3  Radiated Emission Data .................................................................................... 4

4.0      Equipment Photographs..................................................................................... 6

5.0      Product Labelling ................................................................................................ 6

6.0      Technical Specifications..................................................................................... 6

7.0      Instruction Manual .............................................................................................. 6

8.0   Miscellaneous Information ................................................................................. 6
  8.2   Discussion of Pulse Desensitization ................................................................... 7
  8.3   Calculation of Average Factor ............................................................................ 7
  8.4   Emissions Test Procedures ............................................................................... 7

9.0      Equipment List .................................................................................................... 8




Report No.: HK11090666-1
FCC ID: PQN44422TX27MHZ
                                                                                                                        iii


                          INTERTEK TESTING SERVICES

1.0   General Description

1.1   Product Description

      The Equipment Under Test (EUT) is a transmitter of an RC Car operating at
      27.145 MHz as dictated by a crystal. The EUT is powered by a 4.5 V DC source
      (3 x 1.5V "AA" size batteries). The EUT has a left / right control lever, a forward /
      backward control lever and a power ON/OFF switch.

      After switching ON the EUT and the receiver of the RC Car, activating the
      control levers on the EUT can control the receiver moving forward, backward,
      left and right.

      The Model: 1021361/6016876, 1023913/6018296, 1023915/6018296,
      1023996/6018354, 1023999/6018357 and 1024001/6018360 are the same as
      the Model: 44422 in hardware and software aspect. The models are different
      in Model Number and Item Name only.

      Antenna Type : External, Integral

      For electronic filing, the brief circuit description is saved with filename: descri.pdf.


1.2   Related Submittal(s) Grants

      The receiver portion for this transceiver is exempted from the Part 15 technical
      rules per 15.101(b).


1.3   Test Methodology

      Radiated emission measurements were performed according to the procedures
      in ANSI C63.4 (2003). All radiated measurements were performed in an Open
      Area Test Site. Preliminary scans were performed in the Open Area Test Site
      only to determine worst case modes. All radiated tests were performed at an
      antenna to EUT distance of 3 meters, unless stated otherwise in the
      “Justification Section” of this Application.


1.4   Test Facility

      The open area test site and conducted measurement facility used to collect the
      radiated data is located at Garment Centre, 576 Castle Peak Road, Kowloon,
      Hong Kong. This test facility and site measurement data have been placed on
      file with the FCC.



Report No.: HK11090666-1
FCC ID: PQN44422TX27MHZ
                                                                                             1


                        INTERTEK TESTING SERVICES

2.0   System Test Configuration
2.1   Justification
      The system was configured for testing in a typical fashion (as a customer would
      normally use it), and in the confines as outlined in ANSI C63.4 (2003).
      The device was powered by 3 X new 1.5V “AA” size batteries.
      For maximizing emissions, the EUT was rotated through 360°, the antenna
      height was varied from 1 meter to 4 meters above the ground plane, and the
      antenna polarization was changed. This step by step procedure for maximizing
      emissions led to the data reported in Exhibit 3.0.
      The unit was operated standalone and placed in the center of the turntable.
      The equipment under test (EUT) was configured for testing in a typical fashion
      (as a customer would normally use it). The EUT was mounted to a plastic stand
      if necessary and placed on the wooden turntable, which enabled the engineer to
      maximize emissions through its placement in the three orthogonal axes.

2.2   EUT Exercising Software
      There was no special software to exercise the device. Once the unit is powered
      up, it transmits the RF signal continuously.

2.3   Special Accessories
      There are no special accessories necessary for compliance of this product.

2.4   Equipment Modification
      Any modifications installed previous to testing by Spin Master Toys Far East
      Limited will be incorporated in each production model sold/leased in the United
      States.
      No modifications were installed by Intertek Testing Services Hong Kong Ltd.

2.5   Measurement Uncertainty
      When determining of the test conclusion, the Measurement Uncertainty of test
      has been considered.

2.6   Support Equipment List and Description
      N/A.




Report No.: HK11090666-1
FCC ID: PQN44422TX27MHZ
                                                                                    2


                          INTERTEK TESTING SERVICES

3.0   Emission Results

      Data is included of the worst case configuration (the configuration which resulted
      in the highest emission levels). A sample calculation, configuration photographs
      and data tables of the emissions are included.


3.1   Field Strength Calculation

      The field strength is calculated by adding the Antenna Factor and Cable Factor,
      and subtracting the Amplifier Gain (if any), Average Factor (optional) from the
      measured reading. The basic equation with a sample calculation is as follows:
      FS = RA + AF + CF - AG - AV
      where          FS = Field Strength in dBµV/m
                     RA = Receiver Amplitude (including preamplifier) in dBµV
                     CF = Cable Attenuation Factor in dB
                     AF = Antenna Factor in dB
                     AG = Amplifier Gain in dB
                     AV = Average Factor in dB

      In the following table(s), the reading shown on the data table reflects the preamplifier
      gain. An example for the calculations in the following table is as follows:
      FS = RR + LF
      where           FS = Field Strength in dBµV/m
                      RR = RA - AG - AV in dBµV
                      LF = CF + AF in dB

      Assume a receiver reading of 52.0 dBµV is obtained. The antenna factor of
      7.4 dB and cable factor of 1.6 dB are added. The amplifier gain of 29 dB and
      average factor of 5 dB are subtracted, giving a field strength of 27 dBµV/m.
      This value in dBµV/m was converted to its corresponding level in µV/m.

      RA = 52.0 dBµV/m
      AF = 7.4 dB                           RR = 18.0 dBµV
      CF = 1.6 dB                           LF = 9.0 dB
      AG = 29.0 dB
      AV = 5.0 dB
      FS = RR + LF
      FS = 18 + 9 = 27 dBµV/m

      Level in µV/m = Common Antilogarithm [(27 dBµV/m)/20] = 22.4 µV/m




Report No.: HK11090666-1
FCC ID: PQN44422TX27MHZ
                                                                                            3


                        INTERTEK TESTING SERVICES

3.2   Radiated Emission Configuration Photograph

      The worst case in radiated emission was found at 27.145 MHz

      For electronic filing, the worst case radiated emission configuration photographs
      are saved with filename: radiated photos.pdf.


3.3   Radiated Emission Data

      The data on the following page lists the significant emission frequencies, the
      limit and the margin of compliance. Numbers with a minus sign are below the
      limit.

      Judgment: Passed by 3.2 dB margin.




Report No.: HK11090666-1
FCC ID: PQN44422TX27MHZ
                                                                                     4


                        INTERTEK TESTING SERVICES

Applicant: Spin Master Toys Far East Limited       Date of Test: September 21, 2011
Model: 44422
Worst-Case Operating Mode: Transmitting
Sample: 1/2

                                      Table 1

                             Radiated Emissions
          Pursuant to FCC Part 15 Section 227 Emissions Requirement

Polari- Frequency Reading Pre- Antenna Average    Net     Limit  Margin
zation    (MHz)   (dBμV)  Amp   Factor  Factor   at 3m    at 3m   (dB)
                          (dB)   (dB)    (dB)  (dBμV/m) (dBμV/m)
   V       27.145       77.4     16      15.4       0.0       76.8       80.0      -3.2
   V       54.290       39.1     16      11.0        -        34.1       40.0      -5.9
   V       81.435       43.8     16      7.0         -        34.8       40.0      -5.2
   H      108.580       36.7     16      14.0        -        34.7       43.5      -8.8
   H      135.725       37.1     16      14.0        -        35.1       43.5      -8.4
   H      162.870       34.8     16      16.0        -        34.8       43.5      -8.7
   H      190.015       34.1     16      16.0        -        34.1       43.5      -9.4
   H      217.160       33.9     16      17.0        -        34.9       46.0     -11.1
   H      244.305       31.3     16      20.0        -        35.3       46.0     -10.7
   H      271.450       28.4     16      22.0        -        34.4       46.0     -11.6

NOTES: 1. Peak Detector Data unless otherwise stated.

         2. All measurements were made at 3 meters. Harmonic emissions not
            detected at the 3-meter distances were measured at 0.3-meter and an
            inverse proportional extrapolation was performed to compare the signal
            level to the 3-meter limit. No other harmonic emissions than those
            reported were detected at a test distance of 0.3-meter.

         3. Negative sign in the column shows value below limit.

         4.   Loop antenna is used for the emissions below 30 MHz.

         5.   Horn antenna is used for the emissions over 1000MHz.




Report No.: HK11090666-1
FCC ID: PQN44422TX27MHZ
                                                                                  5


                         INTERTEK TESTING SERVICES

4.0   Equipment Photographs

      For electronic filing, the photographs are saved with filename: external photos.pdf
      and internal photos.pdf.


5.0   Product Labelling

      For electronics filing, the FCC ID label artwork and the label location are saved
      with filename: label.pdf.


6.0   Technical Specifications

      For electronic filing, the block diagram and schematic of the tested EUT are
      saved with filename: block.pdf and circuit.pdf respectively.


7.0   Instruction Manual

      For electronic filing, a preliminary copy of the Instruction Manual is saved with
      filename: manual.pdf.

      This manual will be provided to the end-user with each unit sold/leased in the
      United States.


8.0   Miscellaneous Information

      The miscellaneous information includes details of the test procedure and
      measured bandwidth.


8.1   Measured Bandwidth

      The plot saved in bw.pdf which shows the fundamental emission is confined in
      the specified band. And it also shows that the emission is at least 44.78 dB
      below the carrier level at the band edge (26.96 and 27.28 MHz). It meets the
      requirement of Section 15.227 (b).

      Pursuant to FCC Part 15 Section 15.215(c), the 20dB bandwidth of the emission
      was contained within the frequency band designed (mentioned as above) which
      the EUT operated. The effects, if any, from frequency sweeping, frequency
      hopping, other modulation techniques and frequency stability over expected
      variations in temperature and supply voltage were considered.



Report No.: HK11090666-1
FCC ID: PQN44422TX27MHZ
                                                                                       6


                          INTERTEK TESTING SERVICES

8.2   Discussion Pulse Desensitivity

      Pulse desensitivity is not applicable for this device.           Since the transmitter
      transmits the RF signal continuously.


8.3   Calculation of Average Factor

      The average factor is not applicable for this device as the transmitted signal is a
      continuously signal.


8.4   Emissions Test Procedures

      The following is a description of the test procedure used by Intertek Testing
      Services Hong Kong Ltd. in the measurements of transmitter operating under
      the Part 15, Subpart C rules.

      The test set-up and procedures described below are designed to meet the
      requirements of ANSI C63.4 - 2003. A typical or an unmodulated CW signal at
      the operating frequency of the EUT has been supplied to the EUT for all
      measurements. Such a signal is supplied by a signal generator and an
      antenna in close proximity to the EUT. The signal level is sufficient to stabilize
      the local oscillator of the EUT.

      The transmitting equipment under test (EUT) is placed on a wooden turntable
      which is four feet in diameter and approximately one meter in height above the
      ground plane. During the radiated emissions test, the turntable is rotated and
      any cables leaving the EUT are manipulated to find the configuration resulting in
      maximum emissions. The EUT is adjusted through all three orthogonal axis to
      obtain maximum emission levels. The antenna height and polarization are also
      varied during the testing to search for maximum signal levels. The height of the
      antenna is varied from one to four meters.

      Detector function for radiated emissions is in peak mode. Average readings, when
      required, are taken by measuring the duty cycle of the equipment under test and
      subtracting the corresponding amount in dB from the measured peak readings. A
      detailed description for the calculation of the average factor can be found in Exhibit 8.3.

      The frequency range scanned is from the lowest radio frequency signal
      generated in the device which is greater than 9 kHz to the tenth harmonic of the
      highest fundamental frequency or 40 GHz, whichever is lower.




Report No.: HK11090666-1
FCC ID: PQN44422TX27MHZ
                                                                                               7


                         INTERTEK TESTING SERVICES

9.0   Equipment List

1)   Radiated Emissions Test
 Equipment             EMI Test Receiver    Spectrum Analyzer     Biconical Antenna
                                                 40GHz
 Registration No.           EW-2500             EW-2253              EW-0954
 Manufacturer           ROHDESCHWARZ        ROHDESCHWARZ              EMCO
 Model No.                   ESCI                FSP40                 3104C
 Calibration Date         Jan 25, 2011        Nov 23, 2010          Apr 14, 2010
 Calibration Due Date     Jan 25, 2012        Nov 23, 2011          Oct 14, 2011


 Equipment            Log Periodic Antenna 14m Double Shield RF
                                                   Cable
                                              (20MHz - 6GHz)
 Registration No.          EW-0446               EW-2528
 Manufacturer               EMCO                 RADIALL
 Model No.                    3146          nm / br5d / sma 14m
 Calibration Date         Apr 26, 2010         Dec 14, 2010
 Calibration Due Date     Oct 26, 2011         Dec 14, 2011

2)   Bandedge Measurement
 Equipment            Spectrum Analyzer
 Registration No.         EW-2249
 Manufacturer                R&S
 Model No.                 FSP30
 Calibration Date       Oct 22, 2010
 Calibration Due Date   Oct 22, 2011




Report No.: HK11090666-1
FCC ID: PQN44422TX27MHZ
                                                                                   8



Document Created: 2011-10-14 14:37:54
Document Modified: 2011-10-14 14:37:54

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC