(WV300A) OPDes

FCC ID: PPQ-WV300A

Operational Description

Download: PDF
FCCID_1586668

Report No. 119315R-RFUSP28V01 1.2. Operational Description The EUT is a Full HD Video Wireless Transmitter Module with a built-in 5GHz transceiver, together with Full HD Video Wireless Receiver Module. It has a SIMO design of five channel and one slow rate output wireless channel, which generates an upstream channel for data content transmissions. The data modulation is OFDM, using five antennas to support 4(Transmit) * 1(Receive) technology. The device only provided one transmitting speed 31.5Mbps in 20MHz bandwidth mode and 63Mbps in 40MHz bandwidth mode. Presents the ultimate solution for converting any High Definition (HD) system, including Full HD, into a wireless one. These add-on modules enable wireless A/V applications that fit easily into the living room and eliminate traditional A/V wiring. The perfect HD video and audio quality and the high robustness are unmatched by any other wireless technology and present a true alternative to cable. The WHDI system transmits uncompressed video and audio streams wirelessly and thus simplifies and eliminates system issues, such as: lip-sync, large buffers and other burdens like retransmissions or error propagation. The device can transmit audio and video signal to associate equipment, device will receive signal form associate equipment when associate equipment request change operation frequency. The AMN2120 WHDITM baseband transmitter chip is the heart of the WV300A WHDI transmitter module. The AMN2120 interfaces the A/V source through the WHDI connector. The AMN2120 includes an internal microcontroller for controlling the physical level. The AMN2120 is based on MIMO technology transmitting through up to four output channels. Four digital-to-analog converters and one analog-to-digital converter are embedded within the chip. The AMN2120 internal PLL accepts an input clock frequency of 40MHz. The input frequency is multiplied and then used as an internal system clock. The AMN2120 also generates a 10 MHz reference clock, derived from 40 MHz for general use. The AMN3110 is a fully-integrated direct conversion MIMO transmitter specifically designed for WHDI applications using OFDM modulation in 5.15-5.25GHz and 5.725~5.850GHz. The device consists of: ‧ Four Complete Downlink Direct Conversion Transmitters. ‧ One Uplink Receiver. ‧ Integrated Synthesizer. ‧ Internal DC Servo Loops. ‧ RSSI. ‧ IQ Detector. ‧ RF and Baseband Control Interface. ‧ Power Management Unit. ‧ 3-Wire SPI Interface. To complete the RF front-end solution, the AMN3110 uses external PA, RF switches, RF Band Pass Filters (BPF), RF BALUNs and a few passive components. The device antenna are use five FIFA(4TX, 1RX) and printed on PCB, for receiver function there are support one external antenna which can instead of printed antenna. Test Mode: Mode 1: Transmit (31.5Mbps 20MBW) Mode 2: Transmit (63Mbps 40MBW) Page: 7 of 131ٛ ٛ


Document Created: 2011-11-08 16:41:27
Document Modified: 2011-11-08 16:41:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC