Modular Approval Letter

FCC ID: PPQ-WCBN4502B

Cover Letter(s)

Download: PDF
FCCID_2934012

LITE-ON Technology Corp. Bldg. C, 90, Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C Date (02/18/2016) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Modular Approval Request FCC ID: PPQ-WCBN4502B The following attestation addresses the requirements to support modular approval: Modular approval requirement Yes (provide brief statement) No * (a) The radio elements must have the Yes, the module in the radio radio frequency circuitry shielded. frequency component part use Physical components and tuning metal sheet shield. capacitor(s) may be located external to the shield, but must be on the module assembly (b) The module must have buffered Yes, the modules use the modulation/data inputs to ensure that wireless transceiver module as the device will comply with Part 15 buffer Modulation / data input. requirements with any type of input signal (c) The module must contain power Yes, the module use power as supply regulation on the module 5VDC, can regulation power module model is BCM43569. (d) The module must contain a Yes, antenna brand name/Model permanently attached antenna, or name/Antenna type: contain a unique antenna connector, BT- and be marketed and operated only 1. Walsin / with specific antenna(s), per Sections RFMTA400550IMAB301 / PIFA 15.203, 15.204(b), 15.204(c), 2. Walsin / 15.212(a), 2.929(b) RFMTA400536IMAB301 / PIFA 2.4G- 1. HONGLIN / 290-10031 / PIFA 2. Walsin / RFMTA200700NNLB002 / PIFA 5G- 1. HONGLIN / 290-10031 / PIFA 2. Walsin / RFMTA200700NNLB002 / PIFA (e) The module must demonstrate Yes, the module is in a stand- compliance in a stand-alone alone configuration, as the configuration schematic and internal photos.

(f) The module must be labelled with Yes, the module is labeled with its its permanently affixed FCC ID label, own FCC ID PPQ-WCBN4502B, or use an electronic display (See as the label. KDB Publication 784748 about labelling requirements) (g) The module must comply with all Yes,the module is comply the specific rules applicable to the Transmitter rules. And provide transmitter. The grantee must provide Instruction for application. comprehensive instructions to explain compliance requirements (h) The module must comply with RF Yes,the module is comply the exposure requirements applicable RF exposure requirements in its final configuration. * Please provide a detailed explanation if the answer is “No.” Yours sincerely, TC Wu Title: Director LITE-ON Technology Corp. TEL: 886-2-2222-6181 FAX:886-2-2226-6749 E-Mail:sandra.liu@liteon.com


Document Created: 2016-03-10 18:04:50
Document Modified: 2016-03-10 18:04:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC