RF Exposure Information

FCC ID: PPQ-WB101N

RF Exposure Info

Download: PDF
FCCID_4203970

’C@l A Test Lab Techno Corp. Changan Lab : N 0. 140—1, Changan Street, Bade District, Tacyuan City 33465, Taiwan (R.O0.C) Tel : 886—3—271—0188 / Fax : 886—3—271—0190 MPE Report my "m~ Applicant : Lite—On Technology Corp. Product Type : BLE Bluetooth Module Trade Name : LITE—ON Model Number : WB101N Received Data : Jan. 23, 2019 Test Period : Jan. 30, 2019 Issue Date : Mar. 08, 2019 Test Specification : ANSI / IEEE Std.C095.1—1992 / IEEE Std. 1528—2013 47 CFR § 2.1091 47 CFR § 1.1310 Test Firm MRA : TWOO010 designation number 1. The test operations have to be performed with cautious behavior, the test results are as attached. 2. The test results are under chamber environment of A Test Lab Techno Corp. A Test Lab Techno Corp. does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples. 3. The measurement report has to be written approval of A Test Lab Techno Corp. It may only be reproduced or published in full. This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. 4. This document may be altered or revised by A Test Lab Techno. Corp. personnel only, and shall be noted in the revision section of the document. Approved By : E CJI—C o hM H J Tested By : K Yi)s FG\V\ (Edison Hu) (Kris Pan) ©2017 A Test Lab Techno Corp. Report Number: 1902F514 Page 1 of 5 Rev.01

Contents 1. Description of Equipment under Test (EUT)................................................................................ 3 2. Human Exposure Assessment ................................................................................................... 4 3. RF Output Power ....................................................................................................................... 5 4. Test Result ................................................................................................................................. 5 ©2017 A Test Lab Techno Corp. Report Number: 1902FS14 Page 2 of 5 Rev.01

1. Description of Equipment under Test (EUT) Lite-On Technology Corp. Applicant Bldg. C, 90, Chien 1 Road, Chung Ho,New Taipei City 23585, Taiwan, R.O.C. LITE-ON TECHNOLOGY (Changzhou) CO., LTD Manufacturer A9 Building,No.88 Yanghu Road, Wujin Hi-Tech Industrial Development Zone , Changzhou City, Jiangsu Province 213100 China Product Type BLE Bluetooth Module Trade Name LITE-ON Model Number WB101N FCC ID PPQ-WB101N Operate Band Frequency Range (MHz) Frequency Range Bluetooth LE 2402 - 2480 Type Max. Gain (dBi) Antenna Information Printed Antenna 3.0 Antenna Delivery 1TX 2 RF Evaluation 0.001 mW/cm Operate Temp. Range -40 ~ +85°C The above equipment was tested by A Test Lab Techno Corp. For compliance with the requirements set forth in 47 CFR § 2.1091 / 47 CFR § 1.1310. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties ©2017 A Test Lab Techno Corp. Report Number: 1902FS14 Page 3 of 5 Rev.01

2. Human Exposure Assessment Due to the design and installation of this product, it is not possible to conduct SAR evaluation. This is because client either manufactures or supplies the antenna(s) that will be used in the installation of this product. Therefore, this product will be evaluated as a mobile device per 47 CFR § 1.1310 titled “Radiofrequency radiation exposure limits”, generally referred to as MPE limits. In 47 CFR § 2.1091, paragraph (b) defines a mobile device as “a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 cm is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. ” This product is intended to be installed into a vehicle such that the unit is physically secured at one location. In the installation guide supplied with the product, Client has made the following statement: “IMPORTANT: To meet the FCC’s RF Exposure Guidelines, the antenna should be installed so there is at least 20 cm of separation between the body of the user and nearby persons and the antenna”. Based on the installation of the transceiver and the antenna, the transmitters radiating structure is more than 20 cm from the user. Thus, this product is a “mobile device” as defined in section § 2.1091 paragraph (b). Exposure evaluation PG S 4R 2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna. ©2017 A Test Lab Techno Corp. Report Number: 1902FS14 Page 4 of 5 Rev.01

3. RF Output Power Frequency Average Conducted power Operate Band Packet Type (MHz) (dBm) 2402 2.89 Bluetooth LE 2440 --- 2.55 2480 2.36 4. Test Result max tune-up Power with Power Test Distance ANT Numeric Frequency Limit Power Duty Duty cycle Density Antenna Band mode/RB/Data [R] Gain Gain Cycle (MHz) (mw)/cm2 [P] [TP] [S] rate (cm) (dBi) [G] (mW) (mw)/cm2 (dBm) 2402.0 1 20 4.00 3.00 2 1 5.02 0.001 Bluetooth Bluetooth LE - 2440.0 1 20 4.00 3.00 2 1 5.02 0.001 Antenna 2480.0 1 20 4.00 3.00 2 1 5.02 0.001 Note: 1. Mobile or fixed location transmitters, minimum separation distance is 20 cm, even if calculations indicate MPE distance is less. 2. The Numeric Gain calculated by 10^(ant. Gain(dBi) /10). 3. Each band max power which perform MPE of any configurations. ©2017 A Test Lab Techno Corp. Report Number: 1902FS14 Page 5 of 5 Rev.01


Document Created: 2019-03-25 10:04:58
Document Modified: 2019-03-25 10:04:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC