(Play-Fi Receiver) UserMan

FCC ID: PPQ-PLAYFIR1

Users Manual

Download: PDF
FCCID_1741881

Deckard Product Requirement Document PHORUS-DKR-PRD-0001 September 9, 2011 Revision A Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 1 of 18

Document Change Summary Date: Revision: Changes: Author: 2011.09.09 A Initial Release D. O'Brien / D. Lau Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 2 of 18

Table of Contents Table of Contents .......................................................................................................................................... 3 1 Document Scope ........................................................................................................................................ 4 1.1 Definition of Terms .............................................................................................................................. 4 1.2 Notation ............................................................................................................................................... 4 1.3 Highlight Color Codes.......................................................................................................................... 4 2 Applicable Documents ............................................................................................................................... 5 2.1 Reference Design Documents ............................................................................................................ 5 2.2 Order of Precedence ........................................................................................................................... 5 3 Product Overview ....................................................................................................................................... 6 3.1 Features List ........................................................................................................................................ 6 3.2 What is in the Box ................................................................................................................................ 6 4 User Interface (UI) ...................................................................................................................................... 7 4.1 Input Methods ...................................................................................................................................... 7 5 Localization ................................................................................................................................................ 8 5.1 Product SKUs ...................................................................................................................................... 8 5.2 Languages ........................................................................................................................................... 8 6 Hardware .................................................................................................................................................... 9 6.1 Mechanical Arrangement / Industrial Design ...................................................................................... 9 6.2 Rear Panel ......................................................................................................................................... 10 6.3 Front Panel ........................................................................................................................................ 11 6.4 Printed Material ................................................................................................................................. 12 6.5 Serviceability ..................................................................................................................................... 12 6.6 Recyclability ....................................................................................................................................... 13 7 Features ................................................................................................................................................... 14 7.1 System Features ............................................................................................................................... 14 8 State Summary ........................................................................................................................................ 16 8.1 Power On/Off ..................................................................................................................................... 16 8.2 Power Transitions .............................................................................................................................. 16 8.3 Volume States ................................................................................................................................... 16 8.4 Mute State ......................................................................................................................................... 16 9 Technical Requirements .......................................................................................................................... 17 9.1 Power................................................................................................................................................. 17 9.2 DSP ................................................................................................................................................... 17 9.3 Testability .......................................................................................................................................... 18 10 Environmental and Reliability Requirements ......................................................................................... 18 11 Certification and Agency Compliance .................................................................................................... 18 11.1 Intellectual Property Certifications ................................................................................................... 18 11.2 Royalties .......................................................................................................................................... 18 11.3 Certifications .................................................................................................................................... 18 Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 3 of 18

1 Document Scope This document describes in engineering development terms the definition of Deckard. This document will define the engineering platform with enough detail to meet the initial product concept while not constraining the execution team on specific intricate design details. This document is also a description of the functional behavior with sufficient detail in order to achieve an accurate quotation, begin writing user guides and to begin developing test methods. 1.1 Definition of Terms Shall – Term indicates a required element, e.g., "the unit shall play MP3 files". Should – Term indicates a suggestion or preference, e.g., "the unit should attempt to read ID3V1 tags". May – Term indicates an allowance, e.g., "the unit may play FLAC files". Will – Term indicates a statement of fact. This is typically information used for clarity, such as "the unit will be sold in France". 1.2 Notation Requirements are divided into sub-sections based on system division and implementation conventions. Each requirement is labeled as [Rx], where ‘R’ represents the ‘Requirement’ and ‘x’ marks the serial number of each requirement. 1.3 Highlight Color Codes Color: Meaning: Blue Highlight Indication of changes since the last revision Green Highlight Known open issues needing further clarification Purple Highlight Questions or notes for reviewers Red Highlight Incomplete sections Gray text with strikethrough Deleted sections Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 4 of 18

2 Applicable Documents 2.1 Reference Design Documents The following documents form a part of this specification. Each utilized and referenced document shall be the most recent released issue. Phorus Reference Documentation Reliability Test Specification User Interface Specification Mechanical Documents Colors, Materials and Finishes (CMF) Industrial Design Screen Print Specification Reference Specifications Bluetooth.org Qualification Program Reference Document V1.0 Bluetooth.org Advanced Audio Distribution Profile Specification V1.2 Bluetooth.org White Paper on Usage of Multiple Headphones V1.0RC5 2.2 Order of Precedence In the event of a conflict between this specification and the references cited herein, the order of precedence shall be this specification, then any Phorus reference documents, and finally any appendices. Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 5 of 18

3 Product Overview 3.1 Features List [R1]. Bluetooth Advanced Audio Distribution Profile (A2DP) sink for wireless stereo audio streaming [R2]. Use of SBC audio codec for A2DP [R3]. Support pairing with a minimum of 8 devices [R4]. On board power and volume +/- buttons [R5]. Factor defaults reset button [R6]. System/Power status LED (bi-color: White, Amber) [R7]. Bluetooth status LED (single color: Blue) [R8]. Wi-Fi status LED (single color: White) [R9]. Audio Out (3.5mm Stereo Mini) [R10]. World Wide Switching power supply technology (First SKU: USA) [R11]. Low standby power (<0.5W) EuP Requirement 2013 [R12]. USB charging of external devices while in AC operating mode [R13]. Firmware update via USB 3.1.1 Product Description Deckard is a wireless Hi-Fi stereo accessory that receives audio over Bluetooth and Wi-Fi and streams it to powered speakers or line-level inputs. 3.2 What is in the Box [R14]. The following are accessories included with the product. Item: Requirement: Deckard Mandatory AC Power Supply Mandatory Interchangeable Plugs Highly Desirable for EMEA (First SKU: Fixed pin for USA) 12” USB A to USB micro Mandatory Cable 4" 3.5mm to Female RCA Mandatory cable Quick Start Guide Mandatory Warranty Card Mandatory Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 6 of 18

4 User Interface (UI) 4.1 Input Methods 4.1.1 Buttons [R15]. Power: ON/OFF [R16]. Volume Down [R17]. Volume Up [R18]. Reset [R19]. Bluetooth Control [R20]. Audio Out Control Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 7 of 18

4.1.2 User Input Feedback Methods [R21]. LEDs (The functionality of the LEDs can be found here) [R22]. Audible Sounds for connect and disconnect (played through the Audio Out) 5 Localization [R23]. This product shall be engineered such that localization involves the fewest possible variables. 5.1 Product SKUs [R24]. The product shall have the following SKUs. These SKUs are differentiated by the power supply plugs. (see Power Section). [R25]. Americas (Suffix: AM) – Fixed US Plug [R26]. EMEA (Suffix: EU) – two replaceable plugs: UK and EU (Highly desirable) 5.2 Languages [R27]. The following languages are required for the AM beauty carton: a. English b. French (Français) c. Spanish (Español) [R28]. The following languages are required for the EU beauty carton: a. English b. French (Français) c. Spanish (Español) d. German (Deutsch) e. Dutch (Nederlands) f. Italian (Italiano) [R29]. The following languages are required for the AM quick start guide: a. English b. French (Français) c. Spanish (Español) [R30]. The following languages are required for the EU quick start guide: a. English b. French (Français) c. Spanish (Español) d. German (Deutsch) e. Dutch (Nederlands) f. Italian (Italiano) Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 8 of 18

6 Hardware Figure 1: Main System Block Diagram NOTE: I2S may require routing topology to support all use cases: 1. BT to Phorus Wireless Module 2. Phorus Wireless Module to DSP 3. BT to DSP, if Phorus Wireless Module is not populated 4. DSP to Phorus Wireless Module for streaming audio output 6.1 Mechanical Arrangement / Industrial Design Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 9 of 18

Figure 3: Industrial Design (not to be used for production) [R31]. Dimensions indicated above. [R32]. The system shall conform to the design language specified by the ID guidelines. 6.2 Rear Panel Figure 4: 2D drawing of the back and bottom panel (not to be used for production) Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 10 of 18

6.2.1 Connectors The input and output sections of the rear panel are as follows: Connector: Number #: Type (Images for informational use only): [R33]. Mini Audio Jack (Audio Out) 1 3.5mm COLOR: LIME GREEN [R34]. Power plug 1 3.5mm power connector [R35]. USB 1 Micro USB [R36]. USB 1 Type A 6.3 Front Panel Figure 5: Top panel (not to be used for production) Figure 6: Front panel (not to be used for production) Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 11 of 18

6.3.1 Buttons and Switches The top panel shall have the following buttons: [R37]. Power [R38]. Volume Down [R39]. Volume Up The font panel shall have the following buttons: [R40]. Bluetooth button for pairing [R41]. Wi-Fi button for WPS 6.3.2 LEDs [R42]. The top panel shall have one bi-color System/Power Status LED (White and Amber) sharing one light pipe [R43]. The front panel shall have one single color Bluetooth LED (Blue) [R44]. The front panel shall have one single color Wi-Fi LED (White) 6.4 Printed Material 6.4.1 Quick Start Guide [R45]. The quick start guide be four color. [R46]. The AM quick start guide shall have approximately 3 pages per language. [R47]. The EM quick start guide shall have approximately 6 pages per language. 6.4.2 Warranty Card [R48]. The warranty card shall be black and white. 6.4.3 Beauty Box [R49]. The box shall be four color (CMYK). [R50]. The box shall have varnish / UV coating. [R51]. The box shall use recycled/recaptured materials where possible. [R52]. The box shall be 0.08 Pt. or better card stock, 250 lb. or better C Kraft. [R53]. The box shall meet all Phorus validation and reliability requirements, e.g. pass drop tests, environmental tests. 6.4.4 Overpack Box [R54]. The box shall be two color (PMS color). [R55]. The box shall use recycled/recaptured materials where possible. [R56]. The box shall be 0.08 Pt. or better card stock, 250 lb. or better C Kraft. [R57]. The box shall meet all Phorus validation and reliability requirements, e.g. pass drop tests, environmental tests. 6.4.5 Master Carton [R58]. The quantity requirement is 4 units per master carton. [R59]. Versions are to be differentiated by different master carton labels. [R60]. The master carton shall be labeled with the serial numbers of the contained Deckard products. 6.5 Serviceability [R61]. This product shall be designed for serviceability. The device shall allow reasonable ease of access to internal components for service and/or repair. Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 12 of 18

6.6 Recyclability [R62]. The system shall conform to all recyclability rules (ease of disassembly) required of each region defined in the Localization section. Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 13 of 18

7 Features 7.1 System Features 7.1.1 Bluetooth Audio Subsystem [R63]. The system shall wirelessly pair to a Bluetooth-enabled device. [R64]. The system shall be up to date with the latest version of the Bluetooth protocol specification v2.1 and be compatible with the Enhanced Data Rate (EDR) specification (Data Rate: 3 Mbit/s). [R65]. The operating range of the system shall meet or exceed the requirement of a Bluetooth Class 2 device (Maximum permitted power: 2.5mW – 4dBm, Range: 30 feet). [R66]. The BT test protocol shall demonstrate better than 0.1% BER (as a note this should correspond to a receiver with better than -85dBm sensitivity) over a free air range of at least 12 meters [R67]. Less than 0.1% BER shall be verified at 432 test points. The test area is described as 360 degree radial cone, -15degrees to +40 degrees in elevation, 12 meters from the unit under test. Each test point is within this cone at both -15 degree declination and +40 degree elevation, at 10 degree radial intervals. This yields a total of 72 test points (36 radial points * 2 elevation angles). At each test point, the Class 2 transmitting device shall be oriented orthogonally in all 3 axis, 180 degrees in each axis (yielding a total of 6 orientations). Up to 3 commercially available Class 2 transmitting devices shall be used during this test. [R68]. The system shall pair with a Bluetooth enabled device in order to wirelessly stream audio content from a Bluetooth audio source device. Advanced Audio Distribution Profile (A2DP) version 1.2 allows the use of the mandatory Sub Band Coding (SBC) codec for compressing audio for efficient streaming. [R69]. The Bluetooth subsystem shall be capable of pairing and saving pairing information with a minimum of 8 source devices. 7.1.2 Wi-Fi Audio Subsystem [R70]. The system shall be able to accept audio from the Wi-Fi subsystem [R71]. The Wi-Fi Audio subsystem shall employ 802.11n [R72]. The Wi-Fi Audio subsystem shall also include BT A2DP Sink capability with similar performance to the standalone BT module [R73]. The Wi-Fi Audio subsystem shall have a minimum 400MHz ARM9 or equivalent performance [R74]. The Wi-Fi Audio subsystem shall have a minimum of 128MB of Flash memory and 64MB of DRAM [R75]. The Wi-Fi Audio subsystem shall run the Linux operating system [R76]. The Wi-Fi Audio subsystem shall be able to accept a I2S input from the Bluetooth Subsystem and/or the incorporated BT A2DP sink system of the BT/Wi-Fi module 7.1.3 Power [R77]. The system shall have the following power modes: a. Normal operational mode (front panel standby LED is white). b. Standby (front panel power LED is off). c. Off mode (front panel power LED is off). [R78]. When the system is off, a power command shall transition the unit from standby to operational mode. [R79]. When the system is in operational mode, a power command shall transition the unit from operational mode to off. Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 14 of 18

[R80]. The system shall support an auto-off mode which causes the system to transition to off after 10 minutes of inactivity (i.e. no user input or no audio). The off mode shall comply with EuP 2013 power standards. [R81]. The auto-off mode shall capable of being disabled. [R82]. The auto-off mode disable control shall be accessible via the Deckard UI or over Wi-Fi. 7.1.4 LEDs [R83]. The system shall have one LED located on the top panel of the system. If the system is powered on the Power/System LED shall indicate system status. [R84]. The state of the auto-off mode shall be communicated to the user through the Power/System state LED as defined in the Bishop User Interface document. [R85]. Color (Orange or White) shall communicate [R86]. The Blue LED shall indicate Bluetooth status. [R87]. The Bluetooth LED status shall be as defined in the Bishop User Interface document. 7.1.5 Audio Out [R88]. There shall be an analog audio output (3.5mm stereo mini). [R89]. Nominal Output Level: −10 dBV [R90]. Nominal Output Level VRMS: 0.316 V [R91]. Nominal Output Level VPK: 0.447 V [R92]. SNR > 100dB [R93]. DNR > 100dB [R94]. Frequency Response: 20Hz – 20KHz +/- 1 dB [R95]. Output Impedance: 100 Ohm 7.1.6 USB Charge [R96]. The system shall provide a charge port for USB devices. Per section 6.2.1, the USB connector shall be of Type A. [R97]. Charge current and voltage shall be in compliance with USB requirements. 7.1.7 Device Firmware Update [R98]. The system shall incorporate a device firmware update feature via the USB port. [R99]. Firmwares in BT subsystem, system controller MCU, and the Phorus Wireless Module (called Caprica) shall be updated. [R100]. Appropriate fail-safe mechanisms shall be enforced. 7.1.8 Sources [R101]. The unit shall have the following sources: [R102]. Analog Audio Output via 3.5 mm connector [R103]. Bluetooth Audio [R104]. Wi-Fi Audio (For Caprica Module Only) [R105]. System Audio from uC or BT Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 15 of 18

8 State Summary 8.1 Power On/Off 8.2 Power Transitions [R106]. The unit is in power off mode when the AC power is disconnected. [R107]. The system shall transition from power off to standby mode (reaching an idle state ready for user input) within 1 second upon plugging the AC power in. [R108]. The unit should transition from off to operational mode instantly. If this is not possible the unit shall blink certain LEDs while transitioning from off to operational mode (to be defined in the UI spec). [R109]. The unit should transition from operational mode to standby instantly. If this is not possible the unit shall blink certain LEDs while transitioning from off to operational mode (to be defined in the UI spec). 8.2.1 Buttons [R110]. The system shall transitions from off to operational mode via the following actions: a. Front panel Power button is pressed b. Bluetooth b button is pressed c. Wi-Fi button is pressed [R111]. The system shall transitions from operational mode to off via the following actions: a. Top panel standby button is pressed 8.3 Volume States [R112]. The factory default volume setting shall be -20 dB. [R113]. When the system transitions from off to operational mode, the last volume setting when the system was previously in operational mode shall again be the volume setting. [R114]. When transitioning from one source to another, the current volume setting shall persist. [R115]. When the system transitions from off to operational mode, the volume should ramp from minus infinity to the current volume setting in 250 ms. [R116]. When the system transitions from operational mode to standby, the volume should ramp from the current volume setting to minus infinity in 250 ms. [R117]. When the current source is changed, the volume should ramp from the current volume setting to minus infinity, the source should switch, and then the volume should ramp from minus infinity to the current setting. The entire process should occur within 500 ms. 8.4 Mute State [R118]. In operational mode, the system shall always be in one of two mute states: mute on or mute off. [R119]. When the system transitions from standby mode to operational mode, the mute state shall always be mute off. [R120]. When the current mute state is mute off, pressing the mute button or pressing the top panel volume + and volume – buttons simultaneously shall cause the mute state to transition to mute on. [R121]. When the current mute state is mute off, pressing the mute button or pressing the top panel volume + and volume – buttons simultaneously shall cause the mute state to transition to mute on. [R122]. When the current mute state is mute on, pressing the mute button or pressing the top panel volume + and volume – buttons simultaneously shall cause the mute state to transition to mute off. [R123]. When the current mute state is mute on, pressing the volume + button on the top panel shall cause the mute state to transition to mute off. [R124]. When the current mute state is mute on, pressing the volume - button on the top panel shall cause the mute state to transition to mute off. Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 16 of 18

9 Technical Requirements 9.1 Power [R125]. The main shall conform to local Energy Efficiency laws and regulations in the country of destination. [R126]. For the European Union this requires compliance with “DIRECTIVE 2005/32/EC on Energy Using Products” (as amended) as implemented by “COMMISSION REGULATION (EC) No 1275/2008” and / or “COMMISSION REGULATION (EC) No 278 2009”. When in Standby State, the power amplifier, DSP are turned off and the MCU is in low power consumption mode. In standby state, the EuP requirement for power consumption is 0.5W for 2013. The 2013 standard is mandatory. [R127]. Countries outside the European Union also have requirements. Examples include, but are not limited to, Australia, Canada, Korea, Switzerland, USA [R128]. The power supply shall be a wall-wart type universal switching power supply in order to accommodate world wide use. [R129]. The captured 1.5 meter long 2-conductor power output cable shall terminate in a barrel type connector with the power input jack on the rear of the Pan unit (see section 6.3.1.1) [R130]. The power supply shall have the following characteristics: Input 100-240 V AC 50/60 Hz Output 12V DC 2A [R131]. It is highly desired for the AC power cord to be as thin and flexible and also to have a small as possible connector. This way the user can elegantly route the power cord to their desire. If possible, the power cord should have 2 conductors and no ground as long as it passes all regulatory requirements. [R132]. The EMEA power supply shall have interchangeable plugs for EU and UK. [R133]. The following images are descriptions for each power supply type. They are grouped by SKU. The images are for informational use only: SKU: Power Supply Type: Americas Fixed Pins EMEA 9.2 DSP 9.2.1 Audio Routing [R134]. The unit shall support playback of any one audio source at any time. The sources are: [R135]. Bluetooth Subsystem [R136]. Wi-Fi Subsystems (For Caprica Module Only) [R137]. System Sounds 9.2.2 Filters and Limiter / Compressor [R138]. The signal processing block of the system shall be capable of processing a minimum of 5 biquads per channel. Provisions shall be made for Phorus to access the DSP to modify the filter coefficients for acoustic tuning. Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 17 of 18

[R139]. The amplifier response shall be capable of being flat between 20Hz to 20kHz. In the audio path a DSP shall be used in order to correct for any linear acoustic distortion. [R140]. The system shall also have a limiter in order to optimize the max power max bandwidth parameters. 9.2.3 System Volume [R141]. The main system volume shall have 30 steps, representing gain of –40 dB to 0 dB. 9.3 Testability [R142]. PCB shall feature test points that allow for 100% nodal coverage. [R143]. FMEA shall be conducted and addressed. 10 Environmental and Reliability Requirements [R144]. This product shall conform to the standard environmental and reliability requirements and guidelines as identified by the operations/quality assurance team. 11 Certification and Agency Compliance 11.1 Intellectual Property Certifications [R145]. The system shall adhere to the Bluetooth Qualification Program Requirements, as defined in the Bluetooth Qualification Program Reference Document and be certified by a testing facility (BQTF) and an expert (BQE). 11.2 Royalties TBD 11.3 Certifications The following royalties will be required: [R146]. VCCI [R147]. PSE [R148]. TUV (Germany) [R149]. EuP [R150]. RoHS Compliance [R151]. Safety and emissions requirements for the following countries are required: a. Europe (CE) b. USA (FCC, UL) Confidential - Do Not Distribute Revision A - Sep. 9 2011 page 18 of 18

220 mm FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipmenthas on testd andfound to comply wit th ts o aClas B cigta devee, pursuant o Par 15 o the PCO Ruls. Tese ns e desined tpovde aqansthammia ina ‘Thiseqviementa . usesand can ze raciorecuency enogyand,notnstaled and used in accortance wittheinstuctons, may cause hmItetrence t raclo commnicatons. Howeve, ther is no guarantnthat nterlarmnce wil not occur n a partoular Instalaton 1 ts equipment daes cause harnlItarference to racis o teevilorecepto, whch can e deterinad by rrig the ecuiment ol and on, e usris encouraged toty to conecte intertrence by on or mae cfthefolovingmessures ~Rearent o rlocat tha recating antema —Icrease the separaton between the easomentand recavec ~Gamnectth eauiment o an utet an a cret diferent ho thato uhich threcave is comnecied —Gonsut hedeie o an xperencnd reda/TV iciricanfrhan caution: Any hanges or mecifcatons not expressy agprove by thepary responsbie for camplance could vad the use athartyto aperate he exuipment This devie comples wih Par 15 ofhe FCG Rules. Operaion is subiet t he folowing o condtions: (1 Thi device may not ause harmintoderonc and ) This devies munt accent ary Intarrence receve. nccing nterorice that may cauneundasied opersion AF Exposre Warming Thisexuipment must bo nsated and operated i accortance wih provide nstctonsand the antemnal) usc forthis ranmitr mustbe nstted to prvide a eparaton 170 mm distance t atleat 20 m hm aparos and mustnotbe o—ccaled o operaing n conincton wih ary the antomna ortransriter Encusers and nsalarsmust be rovided witartema nstalaton nstuctonsand vansmite operaingconciionsforsatuyng RF exponire complance Canada, Industry Canada (IC) Notices This Gass 8 igta appwatus comples wih Canian GES—008 and RSS210. Operaion is subictto the folowng io condtion: (1) is davicn may rot cause nterrance,and () s devce mustaccept any ntrlrnce,incucng intaderoncethat may cause undesind operaion ofhe davce Radlo Frequeney RF)Exponure Information The rdiated outot poweroftha Winiess Devic s below thIndusty Canada (Cralje requency erposir rts. The Winiess Devceshoul beused in sich a manner such thattra potantal for human contact urng nomal aperaion s minimized This evie has alsoen evavatd and shoun complant wth tha G RF Exposire is undar mable exposire condlons (atennas wgrtar han 20om fom a penon‘s body. Canadaavis industy Ganada (C) Cet apparalnumdique de casse B escntarme ax nrmes caniiamnesCEo08 ut s210 Son fanctonnement est sounis ux daux condlons suvantes : 1 entapmaril ne dat pas cause nerBrence t 2 st eaparlldat acceer tout nterronce, otarmantles ietertiances aupeventafecter son fonctomenent informations concormantPoxpontion m réqzences ecio (RF) t puissancede sorlednie paFpparld sai I Dalostnéreare a n Iite oexposton a friquencesrado c Industy Ganada (G, UnisesFapparal de sns i e fagon a mitimise les contctshumais los d fonctonnament romaL. e pétsnéraue a dgsiement is raut o démenté contarme mss ints o expoution ux RF 16 dans es concons c sipostion & oo appares maltos fen ariemnes se stuenta mans de 20 on du come ‘uno pesonnd. or—31—a00000.01 AR#t WI—QES—002 KokR2t e o6 i th (ZF):Phorus (MB): 100P —ASSRREAE A4 UNIT SCALE] SHEET MODEL No. NM—401MP(Deckard)/BSS—7B0(Bishop) Phorus (B@&E):BLACK @E MM NON 1(1) part name FCC/IC Warranty Card (EX6TI®) : 36ith LIMITS UNLESS OTHERWISE NOTED APPROVED| CHECKED DESIGNED| PART No. 515300088397 REV| Al X. +— x.8— (R#):220x170mm .X + .x"+~ Es 4 (RE):+—0.5mm .xX — .xx°+— blue LITE ]‘VI XErRRHAIRARS .XXX + .XXX® + 2012.07. 2 LITE—ON TECHNOLOGY CORP. 3 4 I 5 I 6 7 I 8


Document Created: 2012-06-15 15:53:03
Document Modified: 2012-06-15 15:53:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC