Modular Approval Request Letter rev

FCC ID: PPQ-MP1

Cover Letter(s)

Download: PDF
FCCID_3012124

FCC ID: PPQ-MP1


               Modular Approval Request Letter
Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
                                                                                           May 31, 2016
Dear Application Examiner,
Lite-On Technology Corp., Low Energy Wi-Fi Single Band 802.11b/g/n module, FCC ID:
PPQ-MP1, would like to have your authorization as a modular approval specific to the
mobile RF exposure condition.
The requirements of KDB 996369 D01 Module Certification Guide v02 have been met and
shown on the following statements.
The requirements of Section 15.212 have been met and shown on the following
statements.
1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been
   shielded, please see exhibition External Photo.
2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs,
   it is integrated in chip QCA4010.
3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator
   is QCA4010.
4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).”
   The EUT meets the FCC antenna requirements.
5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a
   stand-alone configuration via a Test tool.
6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label
   Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions
   give to the OEM on how to label the end product.
7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the
   transmitter and the manufacturer must provide adequate instructions along with the module to explain
   any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for
   maintaining compliance are given in the Users Manual.
8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is
   compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure
   exhibition.

Please contact me if you have any further questions. Thanks for your attention.

Best Regards,




Amanda Wu / Senior Specialist
Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
Tel: 886-3-318 3232 ext. 1929
Fax: 886-3-327 0892
Email: amanda.wu@tw.bureauveritas.com



Document Created: 2016-05-31 14:33:49
Document Modified: 2016-05-31 14:33:49

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC