Test Report (DXX)_rev.pdf

FCC ID: PPQ-HUB01

Test Report

Download: PDF
FCCID_4063103

FCC Test Report Report No.: RF180718D12-3 FCC ID: PPQ-HUB01 Test Model: HUB01 Received Date: July 18, 2018 Test Date: Aug. 05 to Oct. 17, 2018 Issued Date: Oct. 26, 2018 Applicant: LITE-ON Technology Corp. Address: Bldg. C, 90, Chien 1 Rd., Chung-Ho,New Taipei City,23585,Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180718D12-3 Page No. 1 / 28 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 8 3.3 Description of Support Units ............................................................................................................... 9 3.3.1 Configuration of System under Test .................................................................................................. 10 3.4 General Description of Applied Standards ......................................................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures ................................................................................................................................. 15 4.1.4 Deviation from Test Standard ............................................................................................................ 15 4.1.5 Test Setup .......................................................................................................................................... 16 4.1.6 EUT Operating Conditions................................................................................................................. 17 4.1.7 Test Results ....................................................................................................................................... 18 4.2 Conducted Emission Measurement .................................................................................................. 23 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 23 4.2.2 Test Instruments ................................................................................................................................ 23 4.2.3 Test Procedures ................................................................................................................................. 24 4.2.4 Deviation from Test Standard ............................................................................................................ 24 4.2.5 Test Setup .......................................................................................................................................... 24 4.2.6 EUT Operating Conditions................................................................................................................. 24 4.2.7 Test Results ....................................................................................................................................... 25 5 Pictures of Test Arrangements .......................................................................................................... 27 Appendix – Information on the Testing Laboratories ................................................................................ 28 Report No.: RF180718D12-3 Page No. 2 / 28 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF180718D12-3 Original release. Oct. 26, 2018 Report No.: RF180718D12-3 Page No. 3 / 28 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Norman Hub Brand: Test Model: HUB01 Sample Status: ENGINEERING SAMPLE Applicant: LITE-ON Technology Corp. Test Date: Aug. 05 to Oct. 17, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.249) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Oct. 26, 2018 Claire Kuan / Specialist Approved by : , Date: Oct. 26, 2018 May Chen / Manager Report No.: RF180718D12-3 Page No. 4 / 28 Report Format Version: 6.1.1

Eooert venitas 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (SECTION 15.249) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission PASS Minimum passing margin is —3.55dB at 0.42472MHz. Radiated Emission Test B E M 15.209 .an.d dge Measurement Meet the requirement of limit. Limit: 50dB less than the peak value Cl . ag 15.249 of fundamental frequency or meet PASS Minimum passing margin is 15.249 (d) C Ne frequency n radiated emission limit in section —7.30B at 2369.00MHz. 15.209 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Expanded Uncertainty Measurement Frequency (k=2) (®©) Conducted Emissions at mains ports 150kHz ~ 3O0MHz 1.84 dB Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.33 dB 1GHz ~ 6GHz 5.10 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 4.85 dB 18GHz ~ 40GHz 5.24 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF180718D12—3 Page No. 5/ 28 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product Norman Hub Brand Test Model HUB01 Status of EUT ENGINEERING SAMPLE Power Supply Rating 5Vdc from power adapter Modulation Type GFSK Transfer Rate 1Mbps Operating Frequency 2415~2459MHz Number of Channel 3 Antenna Type Refer to Note Antenna Connector Refer to Note Accessory Device Adapter x 1 USB Cable x 1 (Shielded, 1.0m) Data Cable Supplied RJ45 Cable x 1 (UnShielded, 1.0m) Note: 1. Simultaneously transmission condition. Condition Technology 1 WLAN 2.4GHz GFSK Note: The emission of the simultaneous operation has been evaluated and no non-compliance was found. 2. The EUT could be supplied with a power adapter as the following table: No. Brand Model No. Spec. Plug Input: 100-240V, 50/60Hz, 0.2A Max Shenzhen Keyu Power Supply 1 KA0601A-0501000BSU Output: 5V, 1000mA UK Technology Co., Ltd. DC output cable: Unshielded, 1.0m Input: 100-240V, 50/60Hz, 0.2A Max Shenzhen Keyu Power Supply 2 KA0601A-0501000EUU Output: 5V, 1000mA EU Technology Co., Ltd. DC output cable: Unshielded, 1.0m Input: 100-240V, 50/60Hz, 0.2A Max Shenzhen Keyu Power Supply 3 KA0601A-0501000USU Output: 5V, 1000mA FCC Technology Co., Ltd. DC output cable: Unshielded, 1.0m Note: 1. The adapter 1, 2 is as same as adapter 3; except for plug shape is different. 2. From the above adapters, Adapter 3 was selected as representative adapter for the test and its data was recorded in this report. 3. The antenna provided to the EUT, please refer to the following table: Antenna Gain Frequency Brand Model Antenna Type Connecter Type (dBi) range(GHz) Unictron AA055A 2.5 2.4-2.4835 Chip Antenna NA 4. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF180718D12-3 Page No. 6 / 28 Report Format Version: 6.1.1

3.2 Description of Test Modes 3 channels are provided to this EUT: Channel Frequency Channel Frequency 15 2415 MHz 39 2439 MHz 59 2459 MHz Report No.: RF180718D12-3 Page No. 7 / 28 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT CONFIGURE APPLICABLE TO DESCRIPTION MODE RE1G RE<1G PLC - √ √ √ - RE1G: Radiated Emission above 1GHz & Bandedge Where RE<1G: Radiated Emission below 1GHz Measurement PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement NOTE: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane for below 1GHz and Y-plane for above 1GHz. NOTE: “-”means no effect. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 15 to 59 15, 39, 59 GFSK Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 15 to 59 39 GFSK Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 15 to 59 39 GFSK Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE1G 25deg. C, 65%RH 120Vac, 60Hz Steven Chiang RE<1G 25deg. C, 65%RH 120Vac, 60Hz Steven Chiang PLC 24deg. C, 73%RH 120Vac, 60Hz Andy Ho Report No.: RF180718D12-3 Page No. 8 / 28 Report Format Version: 6.1.1

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Laptop DELL E6420 B92T3R1 FCC DoC Provided by Lab Note: 1. All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. USB Cable 1 1 Yes 0 Supplied by client 2. RJ-45 Cable 1 10 No 0 Provided by Lab 3. Console Cable 1 1.5 No 0 Provided by Lab Note: The core(s) is(are) originally attached to the cable(s). Report No.: RF180718D12-3 Page No. 9 / 28 Report Format Version: 6.1.1

3.3.1 Configuration of System under Test Report No.: RF180718D12-3 Page No. 10 / 28 Report Format Version: 6.1.1

3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.249) ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF180718D12-3 Page No. 11 / 28 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement The field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following Fundamental Field Strength of Fundamental Field Strength of Harmonics Frequency (millivolts/meter) (microvolts/meter) 902 ~ 928 MHz 50 500 2400 ~ 2483.5 MHz 50 500 5725 ~ 5875 MHz 50 500 24 ~ 24.25 GHz 250 2500 Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits as below table, whichever is the lesser attenuation Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF180718D12-3 Page No. 12 / 28 Report Format Version: 6.1.1

4.1.2 Test Instruments For below 1GHz test: DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY54450088 July 05, 2018 July 04, 2019 Keysight Pre-Amplifier EMC001340 980142 Feb. 09, 2018 Feb. 08, 2019 EMCI (*) Loop Antenna EM-6879 264 Dec. 16, 2016 Dec. 15, 2018 Electro-Metrics RF Cable NA LOOPCAB-001 Jan. 15, 2018 Jan. 14, 2019 RF Cable NA LOOPCAB-002 Jan. 15, 2018 Jan. 14, 2019 Pre-Amplifier ZFL-1000VH2B AMP-ZFL-01 Nov. 09, 2017 Nov. 08, 2018 Mini-Circuits Trilog Broadband Antenna VULB 9168 9168-406 Nov. 29, 2017 Nov. 28, 2018 SCHWARZBECK RF Cable 8D 966-4-1 Mar. 21, 2018 Mar. 20, 2019 RF Cable 8D 966-4-2 Mar. 21, 2018 Mar. 20, 2019 RF Cable 8D 966-4-3 Mar. 21, 2018 Mar. 20, 2019 Fixed attenuator UNAT-5+ PAD-3m-4-01 Oct. 03, 2017 Oct. 02, 2018 Mini-Circuits Software ADT_Radiated_V8.7.08 NA NA NA Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. *The calibration interval of the above test instruments is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in 966 Chamber No. 4. 4. The CANADA Site Registration No. is 20331-2 5. Loop antenna was used for all emissions below 30 MHz. 6. Tested Date: Sep. 07, 2018 Report No.: RF180718D12-3 Page No. 13 / 28 Report Format Version: 6.1.1

For above 1GHz test: DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY54450088 July 05, 2018 July 04, 2019 Keysight Horn_Antenna BBHA 9120D 9120D-783 Dec. 12, 2017 Dec. 11, 2018 SCHWARZBECK Pre-Amplifier ZVA-183-S+ AMP-ZVA-03 May 10, 2018 May 09, 2019 Mini-Circuits RF Cable EMC104-SM-SM-1200 160923 Jan. 29, 2018 Jan. 28, 2019 RF Cable EMC104-SM-SM-2000 150318 Jan. 29, 2018 Jan. 28, 2019 RF Cable EMC104-SM-SM-5000 150321 Jan. 29, 2018 Jan. 28, 2019 Pre-Amplifier EMC184045SE 980387 Jan. 29, 2018 Jan. 28, 2019 EMCI Horn_Antenna BBHA 9170 BBHA9170608 Dec. 14, 2017 Dec. 13, 2018 SCHWARZBECK RF Cable EMC102-KM-KM-1200 160925 Jan. 29, 2018 Jan. 28, 2019 Software ADT_Radiated_V8.7.08 NA NA NA Boresight Antenna Tower & Turn Table MF-7802BS MF780208530 NA NA Max-Full Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in 966 Chamber No. 4. 3. The CANADA Site Registration No. is 20331-2 4. Loop antenna was used for all emissions below 30 MHz. 5. Tested Date: Oct. 17, 2018 Report No.: RF180718D12-3 Page No. 14 / 28 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF180718D12-3 Page No. 15 / 28 Report Format Version: 6.1.1

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF180718D12-3 Page No. 16 / 28 Report Format Version: 6.1.1

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions Controlling software (Console Port use”Test command”) has been activated to set the EUT on specific status. Report No.: RF180718D12-3 Page No. 17 / 28 Report Format Version: 6.1.1

Eooert venitas 4.1.7 Test Results Above 1GHz Data : CHANNEL TX Channel 15 DETECTOR Peak (PK) FREQUENCY RANGE |1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION NO. I(:':E'(:) LEVEL (d;llljllvl;rm) MI(\:BG)IN HEIGHT ANGLE VALUE FACTOR (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2369.00 57.1 PK 74.0 —16.9 1.42 H 17 59.2 —2.1 2 2369.00 45.5 AV 54.0 85 1.42H 17 47.6 —2.1 3 2400.00 55.2 PK 74.0 —18.8 1.42H 17 57.4 2.2 4 2400.00 43.9 AV 54.0 —10.1 1.42 H 17 46.1 —2.2 5 *2415.00 86.8 PK 114.0 —27.2 1.42H 17 89.2 —2.4 6 *2415.00 65.8 AV 94.0 —28.2 1.42H 17 68.2 —2.4 7 4830.00 45.8 PK 74.0 —28.2 2.17 H 344 44.0 1.8 8 4830.00 34.7 AV 54.0 19.3 2.17 H 344 $2.9 1.8 9 7245.00 48.1 PK 74.0 25.9 1.75 H 88 40.1 8.0 10 7245.00 37.6 AV 54.0 16.4 1.75 H 88 29.6 8.0 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION NO. I(:':E'(:) LEVEL (d;llljllvl;rm) MI(\:BG)IN HEIGHT ANGLE VALUE FACTOR (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2369.00 57.7 PK 74.0 16.3 248 V 89 59.8 —2.1 2 2369.00 46.7 AV 54.0 7.3 243 V 89 48.8 +221 3 2400.00 56.1 PK 74.0 —17.9 248 V 89 58.3 —2.2 4 2400.00 44.5 AV 54.0 —9.5 248 V 89 46.7 2.2 5 *2415.00 92.1 PK 114.0 —21.9 248 V 89 94.5 —2.4 6 *2415.00 71.1 AV 94.0 —22.9 248 V 89 73.5 —2.4 7 4830.00 44.3 PK 74.0 —29.7 1.56 V 106 42.5 1.8 8 4830.00 33.8 AV 54.0 —20.2 1.56 V 106 32.0 1.8 9 7245.00 48.2 PK 74.0 —25.8 1.20 V 219 40.2 8.0 10 7245.00 37.6 AV 54.0 —16.4 1.20 V 219 29.6 8.0 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) — Pre—Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level — Limit value 5. " * ": Fundamental frequency. Report No.: RF180718D12—3 Page No. 18 / 28 Report Format Version: 6.1.1

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2439.00 87.5 PK 114.0 -26.5 1.49 H 13 90.1 -2.6 2 *2439.00 66.6 AV 94.0 -27.4 1.49 H 13 69.2 -2.6 3 4878.00 45.7 PK 74.0 -28.3 2.15 H 320 43.7 2.0 4 4878.00 34.5 AV 54.0 -19.5 2.15 H 320 32.5 2.0 5 7317.00 48.6 PK 74.0 -25.4 1.36 H 254 40.2 8.4 6 7317.00 37.6 AV 54.0 -16.4 1.36 H 254 29.2 8.4 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2439.00 92.7 PK 114.0 -21.3 2.43 V 86 95.3 -2.6 2 *2439.00 71.9 AV 94.0 -22.1 2.43 V 86 74.5 -2.6 3 4878.00 43.9 PK 74.0 -30.1 1.51 V 27 41.9 2.0 4 4878.00 32.8 AV 54.0 -21.2 1.51 V 27 30.8 2.0 5 7317.00 48.2 PK 74.0 -25.8 1.19 V 233 39.8 8.4 6 7317.00 37.1 AV 54.0 -16.9 1.19 V 233 28.7 8.4 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180718D12-3 Page No. 19 / 28 Report Format Version: 6.1.1

CHANNEL TX Channel 59 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2459.00 88.0 PK 114.0 -26.0 1.45 H 25 90.6 -2.6 2 *2459.00 67.0 AV 94.0 -27.0 1.45 H 25 69.6 -2.6 3 2483.50 55.8 PK 74.0 -18.2 1.45 H 25 58.2 -2.4 4 2483.50 44.2 AV 54.0 -9.8 1.45 H 25 46.6 -2.4 5 4918.00 45.8 PK 74.0 -28.2 2.12 H 332 43.8 2.0 6 4918.00 35.1 AV 54.0 -18.9 2.12 H 332 33.1 2.0 7 7377.00 48.9 PK 74.0 -25.1 1.33 H 256 40.3 8.6 8 7377.00 38.3 AV 54.0 -15.7 1.33 H 256 29.7 8.6 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2459.00 93.7 PK 114.0 -20.3 2.42 V 87 96.3 -2.6 2 *2459.00 72.8 AV 94.0 -21.2 2.42 V 87 75.4 -2.6 3 2483.50 56.1 PK 74.0 -17.9 2.42 V 87 58.5 -2.4 4 2483.50 44.5 AV 54.0 -9.5 2.42 V 87 46.9 -2.4 5 4918.00 44.3 PK 74.0 -29.7 1.55 V 21 42.3 2.0 6 4918.00 33.7 AV 54.0 -20.3 1.55 V 21 31.7 2.0 7 7377.00 48.5 PK 74.0 -25.5 1.23 V 221 39.9 8.6 8 7377.00 37.6 AV 54.0 -16.4 1.23 V 221 29.0 8.6 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180718D12-3 Page No. 20 / 28 Report Format Version: 6.1.1

Below 1GHz Data: CHANNEL TX Channel 39 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 247.50 30.2 QP 46.0 -15.8 1.00 H 37 39.1 -8.9 2 300.00 30.9 QP 46.0 -15.1 1.00 H 76 38.0 -7.1 3 346.49 34.0 QP 46.0 -12.0 1.00 H 201 39.8 -5.8 4 395.98 31.8 QP 46.0 -14.2 1.00 H 61 36.1 -4.3 5 445.50 38.5 QP 46.0 -7.5 2.00 H 325 41.2 -2.7 6 791.98 36.1 QP 46.0 -9.9 2.00 H 335 32.3 3.8 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF180718D12-3 Page No. 21 / 28 Report Format Version: 6.1.1

CHANNEL TX Channel 39 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 148.51 31.9 QP 43.5 -11.6 1.00 V 40 39.6 -7.7 2 199.99 33.0 QP 43.5 -10.5 1.00 V 1 44.1 -11.1 3 346.51 31.9 QP 46.0 -14.1 1.00 V 305 37.7 -5.8 4 445.50 34.8 QP 46.0 -11.2 1.50 V 303 37.5 -2.7 5 494.97 29.8 QP 46.0 -16.2 1.00 V 103 31.6 -1.8 6 791.96 35.5 QP 46.0 -10.5 1.00 V 9 31.7 3.8 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF180718D12-3 Page No. 22 / 28 Report Format Version: 6.1.1

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 847124/029 Nov. 01, 2017 Oct. 31, 2018 R&S Line-Impedance Stabilization Network (for ESH3-Z5 848773/004 Nov. 15, 2017 Nov. 14, 2018 EUT) R&S Line-Impedance Stabilization Network ENV216 100072 June 04, 2018 June 03, 2019 (for Peripheral) R&S 50 ohms Terminator N/A EMC-04 Nov. 01, 2017 Oct. 31, 2018 RF Cable 5D-FB COCCAB-001 Sep. 29, 2017 Sep. 28, 2018 Fixed attenuator STI02-2200-10 003 Mar. 16, 2018 Mar. 15, 2019 EMCI Software BVADT_Cond_ NA NA NA BVADT V7.3.7.4 Note: 1. The calibration interval of the above test instruments are 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Conduction 1. 3. Tested Date: Aug. 05, 2018 Report No.: RF180718D12-3 Page No. 23 / 28 Report Format Version: 6.1.1

uces venitas 4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit — 200B) was not recorded. NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi—peak detection (QP) and average detection (AV) at frequency 0.15MHz—30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane / Test Receiver sw L___J 0 o o o 40cm EUT E*~~l o a o o 80cm |LISN L1 L1 L \ HN T orizontal Gr ound Refere Plane nce Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF180718D12—3 Page No. 24 / 28 Report Format Version: 6.1.1

4.2.7 Test Results Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 10.05 34.82 20.85 44.87 30.90 66.00 56.00 -21.13 -25.10 2 0.42472 10.12 39.52 33.69 49.64 43.81 57.36 47.36 -7.72 -3.55 3 0.44756 10.12 37.41 32.24 47.53 42.36 56.92 46.92 -9.39 -4.56 4 0.59141 10.14 30.07 23.88 40.21 34.02 56.00 46.00 -15.79 -11.98 5 0.84922 10.16 30.38 21.93 40.54 32.09 56.00 46.00 -15.46 -13.91 6 17.69531 11.24 26.69 18.65 37.93 29.89 60.00 50.00 -22.07 -20.11 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF180718D12-3 Page No. 25 / 28 Report Format Version: 6.1.1

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15000 9.95 35.14 18.92 45.09 28.87 66.00 56.00 -20.91 -27.13 2 0.42838 10.02 37.06 28.79 47.08 38.81 57.28 47.28 -10.20 -8.47 3 0.44688 10.02 34.29 26.34 44.31 36.36 56.93 46.93 -12.62 -10.57 4 0.87656 10.04 25.94 18.88 35.98 28.92 56.00 46.00 -20.02 -17.08 5 5.71484 10.29 21.08 11.21 31.37 21.50 60.00 50.00 -28.63 -28.50 6 16.00000 10.93 25.47 14.18 36.40 25.11 60.00 50.00 -23.60 -24.89 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF180718D12-3 Page No. 26 / 28 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF180718D12-3 Page No. 27 / 28 Report Format Version: 6.1.1

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linkou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF180718D12-3 Page No. 28 / 28 Report Format Version: 6.1.1


Document Created: 2019-03-27 04:44:44
Document Modified: 2019-03-27 04:44:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC