Test Report_rev.pdf

FCC ID: PPQ-DIAL01

Test Report

Download: PDF
FCCID_4063011

FCC Test Report Report No.: RF180718D12-2 FCC ID: PPQ-DIAL01 Test Model: DIAL01 Received Date: July 18, 2018 Test Date: Sep. 06 to Oct. 17, 2018 Issued Date: Oct. 26, 2018 Applicant: LITE-ON Technology Corp. Address: Bldg. C, 90, Chien 1 Rd., Chung-Ho,New Taipei City,23585,Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180718D12-2 Page No. 1 / 23 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 8 3.3 Description of Support Units ............................................................................................................... 9 3.3.1 Configuration of System under Test .................................................................................................... 9 3.4 General Description of Applied Standards ........................................................................................ 10 4 Test Types and Results ....................................................................................................................... 11 4.1 Radiated Emission and Bandedge Measurement .............................................................................. 11 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................... 11 4.1.2 Test Instruments ................................................................................................................................ 12 4.1.3 Test Procedures ................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 14 4.1.5 Test Setup .......................................................................................................................................... 15 4.1.6 EUT Operating Conditions................................................................................................................. 16 4.1.7 Test Results ....................................................................................................................................... 17 5 Pictures of Test Arrangements .......................................................................................................... 22 Appendix – Information on the Testing Laboratories ................................................................................ 23 Report No.: RF180718D12-2 Page No. 2 / 23 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF180718D12-2 Original release. Oct. 26, 2018 Report No.: RF180718D12-2 Page No. 3 / 23 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Norman Dial Brand: Test Model: DIAL01 Sample Status: ENGINEERING SAMPLE Applicant: LITE-ON Technology Corp. Test Date: Sep. 06 to Oct. 17, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.249) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Oct. 26, 2018 Claire Kuan / Specialist Approved by : , Date: Oct. 26, 2018 May Chen / Manager Report No.: RF180718D12-2 Page No. 4 / 23 Report Format Version: 6.1.1

Eooert venitas 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (SECTION 15.249) FCC Test Item Result Remarks Clause 15.207 AC Power Conducted Emission NA Power supply is DC 3V from battery Radiated Emission Test B E M 15.209 .an.d dge Measurement Meet the requirement of limit. Limit: 50dB less than the peak value Cl . me 15.249 of fundamental frequency or meet PASS Minimum passing margin is 15.249 (d) u faas q o Y . —3.6dB at 2311.00MHz & 2331.00MHz. radiated emission limit in section 15.209 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Measurement Frequency Expand(ESQl)Jr(]f? Py Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.33 dB 1GHz ~ 6GHz 5.10 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 4.85 dB 18GHz ~ 40GHz 5.24 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF180718D12—2 Page No. 5/ 23 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product Norman Dial Brand Test Model DIAL01 Status of EUT ENGINEERING SAMPLE Power Supply Rating 3Vdc from lithium battery Modulation Type GFSK Transfer Rate 1Mbps Operating Frequency 2415~2459MHz Number of Channel 3 Antenna Type Refer to Note Antenna Connector Refer to Note Accessory Device NA Data Cable Supplied NA Note: 1. The antenna provided to the EUT, please refer to the following table: Antenna Gain Frequency Brand Model Antenna Type Connecter Type (dBi) range(GHz) Unictron AA055A 2.5 2.4-2.4835 Chip Antenna NA 2. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF180718D12-2 Page No. 6 / 23 Report Format Version: 6.1.1

3.2 Description of Test Modes 3 channels are provided to this EUT: Channel Frequency Channel Frequency 15 2415 MHz 39 2439 MHz 59 2459 MHz Report No.: RF180718D12-2 Page No. 7 / 23 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT CONFIGURE APPLICABLE TO DESCRIPTION MODE RE1G RE<1G PLC - √ √ - - Where RE1G: Radiated Emission above 1GHz & Bandedge Measurement RE<1G: Radiated Emission below 1GHz PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement NOTE: 1. The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane for below 1GHz and Y-plane for above 1GHz. NOTE: 2. No need to concern of Conducted Emission due to the EUT is powered by battery. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 15 to 59 15, 39, 59 GFSK Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 15 to 59 15 GFSK Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE1G 25deg. C, 65%RH 3Vdc Steven Chiang RE<1G 25deg. C, 65%RH 3Vdc Steven Chiang Report No.: RF180718D12-2 Page No. 8 / 23 Report Format Version: 6.1.1

Eooert venitas 3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. ECC ID Remarks A. Battery Lithium CR 2032 NA NA Supplied by client Note: 1. All power cords of the above support units are non—shielded (1.8m). 3.3.1 Configuration of System under Test EUT (A) Battery*2 Report No.: RF180718D12—2 Page No. 9/ 23 Report Format Version: 6.1.1

3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.249) ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF180718D12-2 Page No. 10 / 23 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement The field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following Fundamental Field Strength of Fundamental Field Strength of Harmonics Frequency (millivolts/meter) (microvolts/meter) 902 ~ 928 MHz 50 500 2400 ~ 2483.5 MHz 50 500 5725 ~ 5875 MHz 50 500 24 ~ 24.25 GHz 250 2500 Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits as below table, whichever is the lesser attenuation Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF180718D12-2 Page No. 11 / 23 Report Format Version: 6.1.1

4.1.2 Test Instruments For below 1GHz test: DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY54450088 July 05, 2018 July 04, 2019 Keysight Pre-Amplifier EMC001340 980142 Feb. 09, 2018 Feb. 08, 2019 EMCI (*) Loop Antenna EM-6879 264 Dec. 16, 2016 Dec. 15, 2018 Electro-Metrics RF Cable NA LOOPCAB-001 Jan. 15, 2018 Jan. 14, 2019 RF Cable NA LOOPCAB-002 Jan. 15, 2018 Jan. 14, 2019 Pre-Amplifier ZFL-1000VH2B AMP-ZFL-01 Nov. 09, 2017 Nov. 08, 2018 Mini-Circuits Trilog Broadband Antenna VULB 9168 9168-406 Nov. 29, 2017 Nov. 28, 2018 SCHWARZBECK RF Cable 8D 966-4-1 Mar. 21, 2018 Mar. 20, 2019 RF Cable 8D 966-4-2 Mar. 21, 2018 Mar. 20, 2019 RF Cable 8D 966-4-3 Mar. 21, 2018 Mar. 20, 2019 Fixed attenuator UNAT-5+ PAD-3m-4-01 Oct. 03, 2017 Oct. 02, 2018 Mini-Circuits Software ADT_Radiated_V8.7.08 NA NA NA Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. *The calibration interval of the above test instruments is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in 966 Chamber No. 4. 4. The CANADA Site Registration No. is 20331-2 5. Loop antenna was used for all emissions below 30 MHz. 6. Tested Date: Sep. 06, 2018 Report No.: RF180718D12-2 Page No. 12 / 23 Report Format Version: 6.1.1

For above 1GHz test: DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY54450088 July 05, 2018 July 04, 2019 Keysight Horn_Antenna BBHA 9120D 9120D-783 Dec. 12, 2017 Dec. 11, 2018 SCHWARZBECK Pre-Amplifier ZVA-183-S+ AMP-ZVA-03 May 10, 2018 May 09, 2019 Mini-Circuits RF Cable EMC104-SM-SM-1200 160923 Jan. 29, 2018 Jan. 28, 2019 RF Cable EMC104-SM-SM-2000 150318 Jan. 29, 2018 Jan. 28, 2019 RF Cable EMC104-SM-SM-5000 150321 Jan. 29, 2018 Jan. 28, 2019 Pre-Amplifier EMC184045SE 980387 Jan. 29, 2018 Jan. 28, 2019 EMCI Horn_Antenna BBHA 9170 BBHA9170608 Dec. 14, 2017 Dec. 13, 2018 SCHWARZBECK RF Cable EMC102-KM-KM-1200 160925 Jan. 29, 2018 Jan. 28, 2019 Software ADT_Radiated_V8.7.08 NA NA NA Boresight Antenna Tower & Turn Table MF-7802BS MF780208530 NA NA Max-Full Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in 966 Chamber No. 4. 3. The CANADA Site Registration No. is 20331-2 4. Loop antenna was used for all emissions below 30 MHz. 5. Tested Date: Oct. 17, 2018 Report No.: RF180718D12-2 Page No. 13 / 23 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF180718D12-2 Page No. 14 / 23 Report Format Version: 6.1.1

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF180718D12-2 Page No. 15 / 23 Report Format Version: 6.1.1

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions Controlling software (Console Port use”Test command”) has been activated to set the EUT on specific status. Report No.: RF180718D12-2 Page No. 16 / 23 Report Format Version: 6.1.1

Eooert venitas 4.1.7 Test Results Above 1GHz Data : CHANNEL TX Channel 15 DETECTOR Peak (PK) FREQUENCY RANGE |1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION NO. I(:':E'(:) LEVEL (d;llljllvl;rm) MI(\:BG)IN HEIGHT ANGLE VALUE FACTOR (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2332.00 57.6 PK 74.0 16.4 117 H 12 59.6 —2.0 2 2332.00 47.9 AV 54.0 —6.1 1.17 H 12 49.9 2.0 3 2400.00 56.7 PK 74.0 17.3 1.17 H 12 58.9 2.2 4 2400.00 44.5 AV 54.0 —9.5 1.17 H 12 46.7 —2.2 5 *2415.00 93.1 PK 114.0 —20.9 1.17 H 12 95.5 —2.4 6 *2415.00 72.4 AV 94.0 —21.6 1.17 H 12 74.8 —2.4 7 4830.00 42.6 PK 74.0 —81.4 2.80 H 12 40.8 1.8 8 4830.00 82.1 AV 54.0 —21.9 2.80 H 12 30.3 1.8 9 7245.00 44.3 PK 74.0 —29.7 1.25 H 295 36.3 8.0 10 7245.00 33.3 AV 54.0 —20.7 1.25 H 295 25.3 8.0 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION NO. I(:':E'(:) LEVEL (d;llljllvl;rm) MI(\:BG)IN HEIGHT ANGLE VALUE FACTOR (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2332.00 58.3 PK 74.0 15.7 1.24 V 294 60.3 2.0 2 2332.00 50.1 AV 54.0 39 1.24 V 294 52.1 2.0 3 2400.00 57.0 PK 74.0 —17.0 1.24 V 294 59.2 —2.2 4 2400.00 45.4 AV 54.0 86 1.24 V 294 47.6 2.2 5 *2415.00 94.0 PK 114.0 20.0 1.24 V 294 96.4 —2.4 6 *2415.00 73.2 AV 94.0 —20.8 1.24 V 294 75.6 —2.4 7 4830.00 46.0 PK 74.0 —28.0 1.19 V 305 44.2 1.8 8 4830.00 35.5 AV 54.0 —18.5 1.19 V 305 39.7 1.8 9 7245.00 44.2 PK 74.0 —29.8 1.18 V 305 36.2 8.0 10 7245.00 33.8 AV 54.0 —20.2 1.18 V 305 25.8 8.0 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) — Pre—Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level — Limit value 5. " * ": Fundamental frequency. Report No.: RF180718D12—2 Page No. 17 / 23 Report Format Version: 6.1.1

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2311.00 57.5 PK 74.0 -16.5 1.21 H 18 59.5 -2.0 2 2311.00 48.1 AV 54.0 -5.9 1.21 H 18 50.1 -2.0 3 2400.00 56.1 PK 74.0 -17.9 1.21 H 18 58.3 -2.2 4 2400.00 43.9 AV 54.0 -10.1 1.21 H 18 46.1 -2.2 5 *2439.00 92.3 PK 114.0 -21.7 1.21 H 18 94.9 -2.6 6 *2439.00 71.6 AV 94.0 -22.4 1.21 H 18 74.2 -2.6 7 2483.50 57.2 PK 74.0 -16.8 1.21 H 18 59.6 -2.4 8 2483.50 45.8 AV 54.0 -8.2 1.21 H 18 48.2 -2.4 9 4878.00 39.8 PK 74.0 -34.2 2.81 H 8 37.8 2.0 10 4878.00 31.2 AV 54.0 -22.8 2.81 H 8 29.2 2.0 11 7317.00 48.5 PK 74.0 -25.5 1.12 H 116 40.1 8.4 12 7317.00 38.4 AV 54.0 -15.6 1.12 H 116 30.0 8.4 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2311.00 58.0 PK 74.0 -16.0 1.03 V 294 60.0 -2.0 2 2311.00 50.4 AV 54.0 -3.6 1.03 V 294 52.4 -2.0 3 2400.00 56.2 PK 74.0 -17.8 1.03 V 294 58.4 -2.2 4 2400.00 43.9 AV 54.0 -10.1 1.03 V 294 46.1 -2.2 5 *2439.00 93.4 PK 114.0 -20.6 1.03 V 294 96.0 -2.6 6 *2439.00 72.5 AV 94.0 -21.5 1.03 V 294 75.1 -2.6 7 2483.50 57.3 PK 74.0 -16.7 1.03 V 294 59.7 -2.4 8 2483.50 46.1 AV 54.0 -7.9 1.03 V 294 48.5 -2.4 9 4878.00 44.5 PK 74.0 -29.5 1.23 V 309 42.5 2.0 10 4878.00 33.9 AV 54.0 -20.1 1.23 V 309 31.9 2.0 11 7317.00 42.6 PK 74.0 -31.4 2.67 V 194 34.2 8.4 12 7317.00 32.8 AV 54.0 -21.2 2.67 V 194 24.4 8.4 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180718D12-2 Page No. 18 / 23 Report Format Version: 6.1.1

CHANNEL TX Channel 59 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2331.00 57.7 PK 74.0 -16.3 1.15 H 15 59.7 -2.0 2 2331.00 48.2 AV 54.0 -5.8 1.15 H 15 50.2 -2.0 3 2400.00 56.4 PK 74.0 -17.6 1.15 H 15 58.6 -2.2 4 2400.00 44.0 AV 54.0 -10.0 1.15 H 15 46.2 -2.2 5 *2459.00 92.0 PK 114.0 -22.0 1.15 H 15 94.6 -2.6 6 *2459.00 71.1 AV 94.0 -22.9 1.15 H 15 73.7 -2.6 7 2483.50 56.3 PK 74.0 -17.7 1.15 H 15 58.7 -2.4 8 2483.50 43.6 AV 54.0 -10.4 1.15 H 15 46.0 -2.4 9 4918.00 39.6 PK 74.0 -34.4 2.76 H 22 37.6 2.0 10 4918.00 31.0 AV 54.0 -23.0 2.76 H 22 29.0 2.0 11 7377.00 48.6 PK 74.0 -25.4 1.09 H 131 40.0 8.6 12 7377.00 37.5 AV 54.0 -16.5 1.09 H 131 28.9 8.6 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2331.00 58.2 PK 74.0 -15.8 1.02 V 296 60.2 -2.0 2 2331.00 50.4 AV 54.0 -3.6 1.02 V 296 52.4 -2.0 3 2400.00 56.4 PK 74.0 -17.6 1.02 V 296 58.6 -2.2 4 2400.00 44.1 AV 54.0 -9.9 1.02 V 296 46.3 -2.2 5 *2459.00 93.1 PK 114.0 -20.9 1.02 V 296 95.7 -2.6 6 *2459.00 72.4 AV 94.0 -21.6 1.02 V 296 75.0 -2.6 7 2483.50 56.7 PK 74.0 -17.3 1.02 V 296 59.1 -2.4 8 2483.50 44.4 AV 54.0 -9.6 1.02 V 296 46.8 -2.4 9 4918.00 45.3 PK 74.0 -28.7 1.24 V 306 43.3 2.0 10 4918.00 34.8 AV 54.0 -19.2 1.24 V 306 32.8 2.0 11 7377.00 42.8 PK 74.0 -31.2 2.66 V 184 34.2 8.6 12 7377.00 32.3 AV 54.0 -21.7 2.66 V 184 23.7 8.6 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180718D12-2 Page No. 19 / 23 Report Format Version: 6.1.1

Below 1GHz Data: CHANNEL TX Channel 15 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 33.61 20.1 QP 40.0 -19.9 1.00 H 152 29.0 -8.9 2 149.72 20.0 QP 43.5 -23.5 1.00 H 72 27.6 -7.6 3 591.44 27.5 QP 46.0 -18.5 2.00 H 206 27.0 0.5 4 723.38 29.6 QP 46.0 -16.4 1.50 H 286 27.4 2.2 5 863.18 33.1 QP 46.0 -12.9 2.00 H 192 28.5 4.6 6 954.58 34.8 QP 46.0 -11.2 1.50 H 17 28.8 6.0 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF180718D12-2 Page No. 20 / 23 Report Format Version: 6.1.1

CHANNEL TX Channel 15 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 39.55 22.2 QP 40.0 -17.8 1.00 V 201 30.5 -8.3 2 109.93 20.2 QP 43.5 -23.3 1.50 V 231 31.0 -10.8 3 142.67 20.2 QP 43.5 -23.3 2.00 V 202 28.2 -8.0 4 628.78 29.9 QP 46.0 -16.1 1.50 V 360 28.6 1.3 5 802.29 32.1 QP 46.0 -13.9 2.00 V 111 28.3 3.8 6 937.63 34.1 QP 46.0 -11.9 1.00 V 137 28.0 6.1 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. Margin value = Emission Level – Limit value 4. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20 dB below the permissible value to be report. Report No.: RF180718D12-2 Page No. 21 / 23 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF180718D12-2 Page No. 22 / 23 Report Format Version: 6.1.1

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linkou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF180718D12-2 Page No. 23 / 23 Report Format Version: 6.1.1


Document Created: 2019-03-27 09:47:54
Document Modified: 2019-03-27 09:47:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC