SAR Appendix C

FCC ID: PPD-QCWB335

Test Report

Download: PDF
FCCID_1709031

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client Object Calibration procedure(s) Calibration date: This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 06—Oct—10 (No. 217—01266) Oct—11 Power sensor HP 8481A US37202783 06—Oct—10 (No. 217—01266) Oct—11 Reference 20 dB Attenuator SN: S5086 (206) 29—Mar—11 (No. 217—01367) Apr—12 Type—N mismatch combination SN: 5047.2 / 06327 20—Mar—11 (No. 217—01371) Apr—12 Reference Probe ESSDV3 SN: 3205 29—Apr—11 (No. ES3—3205_Apri1) Apr—12 DAE4 SN: 601 04—Jul—11 (No. DAE4—601_Jul11) Jul—12 Secondary Standards 1D # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—Oct—02 (in house check Oct—09) In house check: Oct—11 RF generator R&S SMT—06 100005 04—Aug—99 (in house check Oct—09) In house check: Oct—11 Network Analyzer HP 8753E US$37390585 S4206 18—Oct—01 (in house check Oct—10) In house check: Oct—11 Function Calibrated by: Approved by: Issued: July 25, 2011 This calibration certificate shall not be reproduced excaptin full without written approval of the laboratory. Certificate No: D2450V2—736_Jul11 Page 1 of 8

R & w5 l5tpe Calibration Laboratory of s\“\\‘-/\\//l/"/,; Schwelzerischer Kalibrlerdienst Schmid & Partner S‘B\GE_/MEé Service suisse d‘étalonnage Engineering AG Ne L Servizio svizzero di taratura ; Zeughausstrasse 43, 8004 Zurich, i Switzerland x*/fi\“\\ zwy Swiss Callbration Service CARS Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x.y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) 1EC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) Federal Communications Commission Office of Engineering & Technology (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certificate No: D2450V2—736_Jul11 Page 2 of 8

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASYS V52.6.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz x 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 38.9 + 6 % 1.85 mho/m £ 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL SAR averaged over 1 cm° (1 g) of Head TSL Condition SAR measured 250 mW input power 13.9 mW /g SAR for nominal Head TSL parameters normalized to 1W 54.8 mW /g + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.44 mWw /g SAR for nominal Head TSL parameters normalized to 1W 25.6 mW /g + 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 51.7 46 % 2.00 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 250 mW input power 13.3 mW /g SAR for nominal Body TSL parameters normalized to 1W 52.3 mW / g 2 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 6.18 mW /g SAR for nominal Body TSL parameters normalized to 1W 24.5 mW / g + 16.5 % (Kk=2) Centificate No: D2450V2—736_Jul11 Page 3 of 8

Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 54.4 Q + 1.5 jQ Return Loss —27.0 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 50.8 Q + 2.8 jQ Return Loss — 30.7 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.159 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on August 26, 2003 Certificate No: D2450V2—736_Jul11 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 25.07.201 1 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 736 Communication System: CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 1.85 mho/m; & = 38.9; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2007) DASY52 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.45, 4.45, 4.45); Calibrated: 29.04.2011 Sensor—Surface: 3mm (Mechanical Surface Detection) Electronics: DAE4 $n601; Calibrated: 04.07.2011 Phantom: Flat Phantom 5.0 (front); Type: QDOOOP50AA; Serial: 1001 DASY52 52.6.2(482); SEMCAD X 14.4.5(3634) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 98.095 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 28.615 W/kg SAR(I g) = 13.9 mW/g; SAR(10 g) = 6.44 mW/g Maximum value of SAR (measured)= 18.121 mW/g "8.25 —13.00 1050 2213 0 dB = 18.120mW/g Certificate No: D2450V2—736_Jul11 Page 5 of 8

Impedance Measurement Plot for Head TSL 25 Jul 2011 11:54f16 CHZ) sii 1 U Fs 1: 54.398 e 1.4805 n 96.173 pH 2 450.000 000 MHz De l Cor Av :I.E;S H1d CH2 Cor Av 16° HId CENTER 2 450.000 000 MHz SPAN 400,000 B0D MHz Certificate No: D2450V2—736_Jul1 1 Page 6 of 8

DASY5 Validation Report for Body TSL Date: 25.07.2011 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 736 Communication System: CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 2 mho/m; & = 51.7; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2007) DASY52 Configuration: Probe: ES3DV3 — SN3205; ConvF(4.26, 4.26, 4.26); Calibrated: 29.04.2011 Sensor—Surface: 3mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 04.07.2011 Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002 DASY52 52.6.2(482); SEMCAD X 14.4.5(3634) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 96.550 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 27.432 W/kg SAR(I g) = 13.3 mW/g; SAR(10 g) = 6.18 mW/g Maximum value of SAR (measured) = 17.294 mW/g —8.05 13.28 17.70 2213 0 dB = 17.290mW/g Certificate No: D2450V2—736_Jul11 Page 7 of 8

Impedance Measurement Plot for Body TSL 25 Jul 2011 11:55:00 (CHT s1 1 U Fs 1: 50.812e 262620 18259 pH 2450,.000 000 MHz Del Cor fv 189 H1d CH2 Cor fy 16° H1d CENTER 2 450,000 000 MHz SPAN 400.000 000 MHz Certificate No: D2450V2—736_Jul11 Page 8 of 8

Calibration Laboratory of n Schweizerischer Kalibrierdienst Schmid & Partner ;EEE\_—/(R%E Servibe sulsss diislonnage Engineering AG T es Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland i,,‘/fi\\\? Swiss Calibration Service "nlali? Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is oneof the signatories to the EA Multilateral Agreementfor the recognition of callbration certificates ctent Sporton TW (Auden) Certificat No: DAE4—778_Nov11 |CALIBRATION CERTIFICATE | Object DAE4 — SD 000 D04 BJ — SN: 778 Calibration procedure(s) QA CAL—06.v23 Calibration procedure for the data acquisition electronics (DAE) Calibration date: November 22, 2011 This calibration certificate documents the traceabilty to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probabilty are given on the following pages and are part of the cartficate. All callbrations have been conducted in the closed laboratory faciity: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE criical for callbration) Primary Standards PB Cal Date (Certificate No.) _ Scheduled Calibration Keithley Multimeter Type 2001 SN osto278 28—Sep—11 (No:11450) Sep—12 Secondary Standards iD # Check Date (in house) } Scheduled Check Calibrator Box V1.1 SE UMS 006 AB 1004 O8Jun—11 (in house check) in house check Jun—12 Name Function Signature Callbrated by: Andrea Guntli Technician Approved by: Fin Bomholt R&D Director ¢ . Luw Issued: November 22, 2011 This calibration cartficate shall not be reproduced except in full without written approval of the laboratory. Certificate No: DAE4—778_Nov11 Page 1 of 5

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service sulsse d‘étalonnage Engineering AG Servizio svizzero d taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Glossary DAE data acquisition electronics Connector angle information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and Interpretation of Parameters * DC Voltage Measurement: Calibration Factor assessed for use in DASY system by comparison with a calibrated instrument traceable to national standards. The figure given corresponds to the full scale range of the voltmeter in the respective range. * Connector angle: The angle of the connector is assessed measuring the angle mechanically by a tool inserted. Uncertainty is not required. * The following parameters as documented in the Appendix contain technical information as a result from the performancetest and require no uncertainty. * DC Voltage Measurement Linearity: Veritication of the Linearity at +10% and —10% of the nominal calibration voltage. Influence of offset voltage is included in this measurement. «_ Common mode sensitivity: Influence of a positive or negative common mode voltage on the differential measurement. * Channel separation: Influence of a voltage on the neighbor channels not subject to an input voltage. e AD Converter Values with inputs shorted: Values on the internal AD converter corresponding to zero input voltage * Input Offset Measurement Output voltage and statistical results over a large number of zero voltage measurements. © Input Offset Current: Typical value for information; Maximum channel input offset current, not considering the input resistance. © Input resistance: Typical value for information: DAE input resistance at the connector, during internal auto—zeroing and during measurement. * Low Battery Alarm Voltage: Typical value for information. Below this voltage, a battery alarm signal is generated. «_ Power consumption: Typical value for information. Supply currents in various operating modes. Certificate No: DAE4—778_Nov11 Page 2 of 5

DC Voltage Measurement AID — ConverterResolution nominal High Range: 1LSB = 6AuV , full range = +100...+800 mV Low Range: 1LSB= 61nV , full range . . +3mV DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 se Calibration Factors X Y Z High Range 404.671 + 0.1% (k=2) 403.479 + 0.1%(k=2) 405.024 + 0.1%(k=2) Low Range 3.98682 + 0.7% (k=2) 8.96395 + 0.7% (k=2) 3.99988 + 0.7%(k=2) Connector Angle Connector Angle to be used in DASY system 257.0°41° Certificate No: DAE4—778_Nov11 Page 3 of 5

Appendix 1. DC Voltage Linearity High Range Reading (1V) Difference (uV) Error (%) Channel X + Input 199991.7 —1.00 —0.00 Channel X + Input 20001.30 1.60 0.01 Channel X — Input —19998.01 1.99 —0.01 Channel Y + Input 200001.3 —0.45 —0.00 Channel Y + Input 20000.22 0.62 0.00 Channel Y — Input —20000.61 —0.71 0.00 Channel Z + Input 200008.0 —2.29 —0.00 Channel 2 + Input 19997.83 1.67 —0.01 Channel Z2 _ _— Input —20000.26 :046 0.00 Low Range Reading (1V) Difference (1V) Error (%) Channel X + Input 1999.8 —0.23 —0.01 Channel X + Input 199.97 —0.13 —0.06 Channel X — Input —200.40 —0.50 0.25 Channel Y + Input 1999.4 —0.51 —0.03 Channel Y + Input 199.85 —0.15 —0.08 Channel Y — Input —200.70 —0.70 0.35 Channel Z + Input 1999.7 —0.03 —0.00 Channel Z + Input 198.34 —1.76 —0.88 Channel Z — Input —201.22 1.22 0.61 2. Common mode sensitivity DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 seo Common mode High Range Low Range Input Voltage (mV) Average Reading (uV) Average Reading (1V) Channel X 200 §$27 —6.26 ~200 6.27 5.45 Channel Y 200 —2.21 —2.25 ~200 0.37 0.46 Channel Z 200 —10.25 —9.82 —200 8.33 8.38 3. Channel separation DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Input Voltage (mV) Channel X (gV) Channel Y (xV) Channel Z (uV) Channel X 200 + 1.88 —0.74 Channel Y 200 1.69 + 8.02 Channel Z 200 1.90 —0.74 + Certificate No: DAE4—778_Nov11 Page 4 of 5

4. AD—Converter Values with inputs shorted DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 see High Range (LSB) Low Range (LSB) Channel X 16051 16391 Channel Y 16165 15017 Channel Z 16443 16309 5. Input Offset Measurement DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Input 10M Average (uV) min. Offset (V) max.Offset (uV) §14. I():‘\Il;anon Channel X —0.85 —2.62 —0.17 0.35 Channel Y +1.00 —2.25 0.68 0.55 Channel Z —0.85 —1.78 0.23 0.41 6. Input Offset Current Nominal Input circuitry offset currenton all channels: <25fA 7. Input Resistance (Typical values forinformation) Zeroing (kOhm) Measuring (MOhm) Channel X 200 200 Channel Y 200 200 Channel Z 200 200 8. Low Battery Alarm Voltage (Typical values for information) Typical values Alarm Level (VDC) Supply (+ Vee) +7.9 Supply (— Vee) 7.6 9. Power Consumption (Typical values for information) Typical values Switched off (mA) Stand by (mA) Transmitting (mA) Supply (+ Vee) +0.01 +6 +14 Supply (— Vee) —0.01 —8 8 Certificate No: DAE4—778._Nov11 Page 5 of 5

Calibration Laboratory of 5“\‘\//\/”'@ Schweizerischer Kalibrierdienst Schmid & Partner M Service suisse dtalonnage Engineering AG T ecsg Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland *eay Swiss Calibration Service Alatule Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of callbration certificates client Sporton (Auden) Cortificate No: ET3—1788_Jan12 CALIBRATION CERTIFICATE | Object ET3DVER — SN:1788 Calibration procedure(s) QA CAL—01.v8, QA CAL—23.v4, QA CAL—25.v4 Calibration procedure for dosimetric E—field probes Calibration date: January 26, 2012 This callbration certficate documents the traceabiity to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probabilty are given on the following pages and are part of the cortficate. All callorations have been conducted in the closed laboratory facilty: environment temperature (22 + 3)°C and humidity < 70% . Callbration Equipment used (M&TE critical for calloration) Primary Standards io Gal Date (Gertficate No.) Scheduled Callbration Power moter E44198 cBatzosera 31—Mar—11 (No. 217—01372) Aprt2 Power sensor Edd 12A my4i49s087 3t—Mar—11 (No. 217—01372) Aprt2 Reference 3 dB Attenuator SN: 85054 (3c) 20—Mar—11 (No. 217—01369) Aprt2 Reference 20 dB Attenuator __|_SN: 85086 (20b) 20—Mar—11 (No. 217—01367) Apri2 Reference 30 dB Attenuator ___|_SN: 85129 (30b) 20—Mar—11 (No. 217—01370) Apr2 Reference Probe ES3DV2 sh: 3013 20—Dec—11 (No. ES3—3013_Dect1) Dec—12 ba€a sh: 654 3—May—11 (No. DAE4—654_May11) May—t2 Secondary Standards io Check Date (in house) Scheduled Check RF generator HP 8648C usse42u01700 4—Aug—99 (in house check Apr=11) in house checApr—13 Network Analyzer HP 8758E Usar3905e5 18—0ct—01 (in house check Oct—11) in house check; Oct—12 Name Function Signature Calibrated by: Jeton Kastrati Laboratory Technician a Approved by: i ia Pokovic Technical Manager EK: * Issued: January 26, 2012 This callbration certficate shall not be reproduced except in full without written approval of the laboratory. Certificate No: ET3—1788_Jan12 Page 1 of 11

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse dtalonnage Engineering AG Servizio svizzero di taratura Zoughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 TheSwiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMcy,z sensitivity in free space ConvF sensitivity in TSL / NORMx.y,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B, C modulation dependent linearization parameters Polarization q ip rotation around probe axis Polarization $ 3 rotation around an axis thatis in the plane normal to probe axis (at measurement center), i.e., 9 = 0 is normal to probe axis Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, ‘IEEE Recommended Practice for Determiningthe Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)®, February 2005 Methods Applied and Interpretation of Parameters: * NORMxy,z: Assessed for E—field polarization 8 = 0 (f < 900 MHz in TEM—cell; f > 1800 MHz: R22 waveguide}. NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does notaffect the E*—field uncertainty inside TSL (see below ConvF). * NORM(Mxy,z = NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency responseis included in the stated uncertainty of Conv. *« DCPxy,z: DCP are numericallinearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. * PAR: PAR is the Peak to Average Ratio thatis not calibrated but determined based on the signal characteristics * Axsy.zi Buy.zCxy,2, VRxy,z: A, B, C are numerical linearization parameters assessed based on the data of power sweepfor specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. * ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extendingthe validity from + 50 MHz to + 100 MHz. a * Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. * Sensor Offset: The sensoroffset corresponds to the offset of virtual measurement center from the probe tip (on probe axis}. No tolerance required. Certificate No: ET3—1788_Jan12 Page 2 of 11

ET3DVGR — SN:1788 January 26, 2012 Probe ET3DVOGR SN:1788 Manufactured: May 28, 2003 Repaired January 23, 2012 Calibrated: January 26, 2012 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certificate No: ET3—1788_Jan12 Page 3 of 11

ETSDVGR— SN:1788 January 26, 2012 DASY/EASY — Parameters of Probe: ET3DVGR — SN:1788 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Unc (k=2) Norm (pVi(Vim?) 207 1.99 2.05 £10.1 % DCP (mV)" 98.4 99.3 99.0 Modulation Calibration Parameters UID Communication System Name PAR A B ¢ VR Unc® aB aB aB mV (k=2) 10000 Cw 0.00 x 0.00 0.00 1.00 116.0 £2.7 % Y 0.00 0.00 1.00 118.0 Z 0.00 0.00 1.00 111.6 The reported uncertainty of measurementis stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. * The uncertainties of NormX.Y.Z do not affect the E—field uncertainty inside TSL (see Pages 5 and 6). * Numerical inearization parameter: uncertainty not required. © Uncertainty is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Crtificate No: ET3—1788_Jan12 Page 4 of 11

ETSDVGR— SN:1788 January 26, 2012 DASY/EASY — Parameters of Probe: ET3DVGR — SN:1788 Calibration Parameter Determined in Head Tissue Simulating Media Relative Conductivity Depth Unct. f (MHz)®_|__ Permittivity" (Sim)" ConvFX ConvFY ConvFZ Alpha (mm) (k=2) 835 41.5 0.90 5.80 5.80 5.80 0.31 3.00 £12.0 % 900 41.5 0.97 5.65 5.65 5.65 0.29 3.00 £12.0 % 1750 40.1 1.37 4.90 4.90 4.90 0.80 2.00 +12.0 % 1900 40.0 1.40 4.68 4.68 4.68 0.80 2.02 £12.0 % 2000 40.0 1.40 4.62 4.62 4.62 0.80 1.90 +12.0 % 2450 39.2 1.80 3.99 3.99 3.99 0.80 1.67 +12.0 % © Frequency validty of £ 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MFiz. The uncertainty is the RSS of the ConvE: uncertainty at calibration frequency and the uncertainty for the incicated frequency band. " At frequencies below 3 GHz, the validity of tssue parameters (c and a) can be relaxed to + 10% if liquid compensation formula is appled to measured SAR values. At frequencies above 3 GHz, the validity of issue parameters (c and a)is restricted to + 5%. The uncertainty is the RSS of the Conv uncertainty for indicated target tissue parameters. Certificate No: ET3—1788_Jan12 Page 5 of 11

ETSDVGR— SN:1788 January 26, 2012 DASY/EASY — Parameters of Probe: ET3DVGR — SN:1788 Calibration Parameter Determined in Body Tissue Simulating Media Relative Conductivity Depth Unct. f (MHz)®_|_ Permittivity" (Sim)" ConvFX ConvFY ConvFZ Alpha (mm) (ke2) 835 55.2 0.97 5.75 5.75 5.75 0.29 3.00 +12.0 % 900 55.0 1.05 5.66 5.66 5.66 0.35 2.71 +12.0 % 1750 53.4 1.49 4.29 4.29 4.29 0.80 2.58 + 12.0 % 1900 s13 L582 4.06 4.06 4.06 0.80 240 £12.0 % 2000 53.3 1.52 4.06 4.06 4.06 0.80 240 +12.0 % 2450 52.7 1.95 3.55 3.55 2585 0.64 AA7 £12.0 % ® Frequency valddity of : 100 Miz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the Conv uncertainty at callbration frequency and the uncertainty for the indicated frequency band. Atfrequencies below 3 GHz, the validity of tissue parameters (c and a) can be relaxed to : 10% ifiquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz,the validity of tissue parameters ( and a)is restricted to + 5%. The uncertainty is the RSS of the Conv‘: uncertainty for indicated target tissue parameters. Certificate No: ET3—1788_Jan12 Page 6 of 11

ETSDVGR— SN:1788 January 26, 2012 Frequency Response of E—Field Frequency response (normalized) (TEM—Cell:ifi110 EXX, Waveguide: R22) Uncertainty of Frequency Response of E—field: £ 6.3% (k=2) Certificate No: ET3—1788_Jan12 Page 7 of 11

ETSDVGR— SN:1788 January 26, 2012 Receiving Pattern (¢), 8 = 0° £=600 MHz,TEM f=1800 MHz,R22 El sas m x { + 4 us /A _ s 15— c | * * ® Ne Tot x v Tot X Y 2 o RolF] 10%%‘!«2 so hiz 1367.}*»{1 Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: ET3—1788_Jan12 Page 8 of 11

ETSDVGR— SN:1788 January 26, 2012 Dynamic Range f(SARneaq) (TEM cell , f = 900 MHz) 105 105 108 3 & g’ 1037 ® 8o £ 102 1014 10° i i «4 i 10 102 10‘ 10 10" 10° SAR [mWicm3] LeJ KA Le X compensated X not compensated Y compensated e + Y¥ not compensated Z compensated Z not compensated a &1 5 ui. 2 t f M3 : 103 101 1o° 101 102 SAR [mW/om3] & X compensated + X not compensated ce] Y compensated C+] Ced C+] Y not compensated Z compensated Z not compensated Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: ET3—1788_Jan12 Page 9 of 11

ETSDVGR— SN:1788 January 26, 2012 Conversion Factor Assessment 1= 900 MHz,WGLS RO (H_convF) 1= 1900 MHz.WGLS R22 (H_convF) «f‘ s T ss} as so| & is 3= 3 3 | 18 t 1sf ; as *> . — al I se humpenliotalfoenineliarshasfe hor s fccc oc cacaconcaadacadacsauaumdaty h CA O& a Cb T OR G & 6 % s % a; zim es x; im c witte weilites ww wiliss Deviation from Isotropy in Liquid Error (¢, 8), f = 900 MHz —10 —0.8 —0.6 0.4 —02 00 02 04 06 08 10 Uncertainty of Spherical Isotropy Assessment: £ 2.6% (k=2) Certificate No: ET3—1788_Jan12 Page 10 of 11

ETSDVGR— SN:1788 January 26, 2012 DASY/EASY — Parameters of Probe: ET3DVGR — SN:1788 Other Probe Parameters Sensor Arrangement Triangular Connector Angle (°) Not applicable Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337 mm Probe Body Diameter 10 mm Tip Length 10 mm Tip Diameter 6.8 mm Probe Tip to Sensor X Calibration Point 2.7 mm Probe Tip to Sensor Y Calibration Point 2.7 mm Probe Tip to Sensor Z Calibration Point 2.7 mm Recommended Measurement Distance from Surface 4 mm Certificate No: ET3—1788_Jan12 Page 11 of 11


Document Created: 2019-06-25 19:21:26
Document Modified: 2019-06-25 19:21:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC