Modular Approval Request Letter

FCC ID: PPD-QCNFA364A

Cover Letter(s)

Download: PDF
FCCID_2576933

FCC ID: PPD-QCNFA364A Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch March 11, 2015 Dear Application Examiner, Qualcomm Atheros, Inc., It’s a 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card, FCC ID: PPDQCNFA364A, would like to have your authorization as a modular approval. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.”: The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip QCA6174A. 3. “The modular transmitter must have its own power supply regulation part no.: QCA6174A. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration”. The EUT is tested in a stand-alone configuration via an extender. Please see section Photographs of Test Configuration in the test report. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Amanda Wu / Senior Specialist Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Tel: 886-3-318 3232 ext. 1929 Fax: 886-3-327 0892 Email: amanda.wu@tw.bureauveritas.com Report No. : RF150107E07


Document Created: 2015-03-11 16:46:47
Document Modified: 2015-03-11 16:46:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC