BT EDR DSS Test Report

FCC ID: PPD-QCNFA364A

Test Report

Download: PDF
FCCID_2576570

Radio Test Report (BT-EDR) Report No.: RJ150107E07-2 Test Model: QCNFA364A Received Date: Jan. 07, 2015 Test Date: Feb. 13, 2015 Issued Date: Mar. 13, 2015 Applicant: Qualcomm Atheros, Inc. Address: 1700 Technology Drive, San Jose, CA 95110 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RJ150107E07-2 Page No. 1 / 34 Report Format Verision: 6.1.1

Table of Contents Release Control Record .................................................................................................................................... 3 1 Certificate of Conformity ......................................................................................................................... 4 2 Summary of Test Results ........................................................................................................................ 5 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information ................................................................................................................................ 7 3.1 General Description of EUT (BT-EDR)................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.3 Test Conditions .................................................................................................................................... 9 3.4 Assembly ............................................................................................................................................. 9 3.5 Antenna Specifications...................................................................................................................... 10 3.5.1 Antenna Gain..................................................................................................................................... 10 3.5.2 Antenna Pattern................................................................................................................................. 10 4 Test Results ........................................................................................................................................... 11 4.1 Frequency Tolerance Measurement................................................................................................... 11 4.1.1 Limits of Frequency Tolerance Measurement .................................................................................... 11 4.1.2 Test Setup ........................................................................................................................................... 11 4.1.3 Test Results ........................................................................................................................................ 11 4.2 Occupied Bandwidth Measurement (99% power bandwidth) ........................................................... 12 4.2.1 Limits of Occupied Bandwidth Measurement .................................................................................... 12 4.2.2 Test Setup .......................................................................................................................................... 12 4.2.3 Test Results ....................................................................................................................................... 12 4.3 Spreading Bandwidth Measurement (90% power bandwidth) .......................................................... 15 4.3.1 Limits of Spreading Bandwidth and Spreading Factor Measurement ............................................... 15 4.3.2 Test Setup .......................................................................................................................................... 15 4.3.3 Test Results ....................................................................................................................................... 15 4.4 Spurious Emissions for Transmitter Measurement ........................................................................... 18 4.4.1 Limits of Spurious Emissions ............................................................................................................ 18 4.4.2 Teset Setup........................................................................................................................................ 18 4.4.3 Test Results ....................................................................................................................................... 19 4.5 Antenna Power Measurement........................................................................................................... 22 4.5.1 Limits of Antenna Power .................................................................................................................... 22 4.5.2 Test Setup .......................................................................................................................................... 22 4.5.3 Test Results ....................................................................................................................................... 23 4.6 Spurious Emissions for Receiver ...................................................................................................... 26 4.6.1 Limits of Spurious Emissions For Receiver ....................................................................................... 26 4.6.2 Test Setup .......................................................................................................................................... 26 4.6.3 Test Result ......................................................................................................................................... 27 4.7 Dwell Time ......................................................................................................................................... 28 4.7.1 Limits of Dwell Time........................................................................................................................... 28 4.7.2 Test Setup .......................................................................................................................................... 28 4.7.3 Test Result ......................................................................................................................................... 29 4.8 Interference Prevention Function ...................................................................................................... 31 4.8.1 Limits of Interference Prevention Function ........................................................................................ 31 4.8.2 Test Setup .......................................................................................................................................... 31 4.8.3 Test Results ....................................................................................................................................... 31 5 Test Instruments.................................................................................................................................... 32 6 Photographs of the Test Configuration ................................................................................................. 33 Appendix - Information on the Testing Laboratories ........................................................................................ 34 Report No.: RJ150107E07-2 Page No. 2 / 34 Report Format Verision: 6.1.1

Release Control Record Issue No. Description Date Issued RJ150107E07-2 Original release. Mar. 13, 2015 Report No.: RJ150107E07-2 Page No. 3 / 34 Report Format Verision: 6.1.1

1 Certificate of Conformity Product: 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card Brand: Qualcomm Atheros Test Model: QCNFA364A Sample Status: ENGINEERING SAMPLE Applicant: Qualcomm Atheros, Inc. Test Date: Feb. 13, 2015 Standards: ARIB STD-T66 (V3.7), MIC notice 88 Appendix 43 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Mar. 13, 2015 Elsie Hsu / Specialist Approved by : , Date: Mar. 13, 2015 Hank Chung / Manager Report No.: RJ150107E07-2 Page No. 4 / 34 Report Format Verision: 6.1.1

2 Summary of Test Results The EUT has been tested according to the following specifications: Notice 88 ARIB Report Test Results Appendix 43 STD-T66 Parameter Reference (Note) Reference Ref. General Provisions C 3.2 (4) 4.1 Frequency tolerance C D 3.2 (7) 4.2 Occupied bandwidth C E 3.2 (6) 4.4 Spurious emissions C Transmitting Equipment F -- 4.5 Antenna power C -- -- -- SAR NA Transmitting Antenna Type, configuration, etc. of transmitting -- -- 3.5 C antenna -- -- 3.5 Direction pattern of transmitting antenna C Receiving Equipment G 3.3 (1) 4.6 Spurious emissions of receiver C -- -- 3.5 Refer to all articles for transmitting antenna C Operating Frequency 2400 to 2483.5MHz High Frequency/modulation section cannot be -- 3.7 (1) 3.4 C opened easily -- 3.1 (1) 3.1 Communication method C -- 3.2 (1)a 3.1 Modulation method C -- 3.2 (1)a 3.1 Spread spectrum method C -- 3.2 (2) 4.5 Antenna power C -- 3.6 (2) 4.5 Absolute gain of transmitting antenna C -- 3.6 (2) -- Angular width of principal radiation (AWPR) NA Number of carriers within 1 MHz bandwidth in -- 3.2 (10) -- NA OFDM -- 3.2 (8) 4.3 Spreading bandwidth C -- 3.2 (9) 4.3 Spreading factor C -- 3.2 (11) -- Frequency retention time (FH employed) NA -- 3.4.1(1) 4.8 Interference Prevention Function C -- 3.4.1(3) -- Carrier Sense Capability NA Note:C = Conform NC = Not Conform NT = Not Tested NA = Not Applicable Report No.: RJ150107E07-2 Page No. 5 / 34 Report Format Verision: 6.1.1

2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in TR 100 028-1. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Parameter Uncertainty Occupied Bandwidth 261.60 Hz Spurious emissions 2.52dB Output power density 1.37dB Out of band radiated power 2.52 dB Frequency Tolerance 261.60 Hz 2.2 Modification Record There were no modifications required for compliance. Report No.: RJ150107E07-2 Page No. 6 / 34 Report Format Verision: 6.1.1

3 General Information 3.1 General Description of EUT (BT-EDR) Product 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card Brand Qualcomm Atheros Test Model QCNFA364A Status of EUT ENGINEERING SAMPLE Nominal Voltage 3.3Vdc form host equipment Modulation Type GFSK,π/4-DQPSK, 8DPSK Modulation Technology FHSS Transfer Rate Up to 3Mbps Operating Frequency 2402 ~ 2480MHz Number of Channel 79 Rated RF Output Power Density Refer to Note Conducted RFOutput Power Density Refer to Note Radiated RF Output Power Density Refer to Note Antenna Type Refer to section 3.5 Antenna Connector Refer to section 3.5 Accessory Device NA Data Cable Supplied NA Note: 1. There are Bluetooth technology and WLAN technology used for the EUT. 2. The EUT support multiple function, therefore the WLAN OFDM will be cover BT OFDM (low power) scenario. 3. WLAN/BT coexistence mode: ◆ 2x2 WLAN + BT:  5GHz 802.11a/an (or 11ac) transmit concurrent with BT.  2.4GHz: timely shared coexistence. 4. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RJ150107E07-2 Page No. 7 / 34 Report Format Verision: 6.1.1

3.2 Description of Test Modes 79 channels are provided for BT-EDR mode: Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 0 2402 20 2422 40 2442 60 2462 1 2403 21 2423 41 2443 61 2463 2 2404 22 2424 42 2444 62 2464 3 2405 23 2425 43 2445 63 2465 4 2406 24 2426 44 2446 64 2466 5 2407 25 2427 45 2447 65 2467 6 2408 26 2428 46 2448 66 2468 7 2409 27 2429 47 2449 67 2469 8 2410 28 2430 48 2450 68 2470 9 2411 29 2431 49 2451 69 2471 10 2412 30 2432 50 2452 70 2472 11 2413 31 2433 51 2453 71 2473 12 2414 32 2434 52 2454 72 2474 13 2415 33 2435 53 2455 73 2475 14 2416 34 2436 54 2456 74 2476 15 2417 35 2437 55 2457 75 2477 16 2418 36 2438 56 2458 76 2478 17 2419 37 2439 57 2459 77 2479 18 2420 38 2440 58 2460 78 2480 19 2421 39 2441 59 2461 NOTE 1: By means of test software (QRCT Version3.0 33.0) provided by manufacture, the power levels during the tests were set according to the following codes: Modulation type: GFSK Modulation type: π/4-DQPSK Modulation type: 8DPSK Software Conducted Software Conducted Software Conducted measurement Avg. measurement Avg. measurement Avg. Power setting Power(dBm) Power setting Power(dBm) Power setting Power(dBm) 9 11.27 9 7.91 9 7.94 NOTE 2: The EUT was tested under following test modes, and the test data was recorded in this report: Normal mode GFSK π/4-DQPSK 8DPSK Enable AFH function GFSK π/4-DQPSK 8DPSK * For AFH function only tested occupied bandwidth, spreading bandwidth, Antenna power and dwell time. Report No.: RJ150107E07-2 Page No. 8 / 34 Report Format Verision: 6.1.1

3.3 Test Conditions Test Conditions Voltage (Vdc) Vnormal 3.3 Note : The voltage of radio can make sure variation in ±1% ,that can only use normal voltage to test, if external voltage vary in ±10%. 3.4 Assembly The EUT is constructed as a 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card. The RF circuit was covered by metal shielding case, and the metal shielding case was soldered on PCB. Report No.: RJ150107E07-2 Page No. 9 / 34 Report Format Verision: 6.1.1

3.5 Antenna Specifications 3.5.1 Antenna Gain 2.4GHz Gain 2.4GHz Cable Transmitter Ant. with 5GHz Gain with Cable 5G Cable Loss Connector Brand Model Length Circuit Type cable loss cable loss (dBi) Loss (dBi) Type (mm) (dBi) (dBi) Band 1&2: 2.56 Band 1&2: 1.70 Chain (0) WNC 81-EBJ15.005 PIFA 3.00 Band 3: 4.76 1.15 Band 3: 1.74 IPEX 300 Band 4: 4.76 Band 4: 1.79 Band 1&2: 3.08 Band 1&2: 1.70 Chain (1) WNC 81-EBJ15.005 PIFA 3.62 Band 3: 3.31 1.15 Band 3: 1.74 IPEX 300 Band 4: 2.42 Band 4: 1.79 3.5.2 Antenna Pattern Please refer to the attached file (Antenna pattern). Report No.: RJ150107E07-2 Page No. 10 / 34 Report Format Verision: 6.1.1

4 Test Results 4.1 Frequency Tolerance Measurement 4.1.1 Limits of Frequency Tolerance Measurement Tolerance of frequency shall be +/- 50ppm 4.1.2 Test Setup Spectrum EUT Analyzer 4.1.3 Test Results Modulation: GFSK Environmental Conditions Frequency Voltage normal Channel (MHz) Carrier frequency (MHz) Frequency tolerance (ppm) 0 2402 2401.998560 -0.600 39 2441 2440.996860 -1.286 78 2480 2479.996660 -1.347 Report No.: RJ150107E07-2 Page No. 11 / 34 Report Format Verision: 6.1.1

4.2 Occupied Bandwidth Measurement (99% power bandwidth) 4.2.1 Limits of Occupied Bandwidth Measurement Item Limit Occupied bandwidth <83.5 MHz 4.2.2 Test Setup Spectrum EUT Analyzer 4.2.3 Test Results Modulation: GFSK Normal Mode: Environmental Conditions 25 deg.C, 60% RH Vnormal Hopping Mode Occupied Bandwidth (MHz) 78.20 AFH Mode: Environmental Conditions 25 deg.C, 60% RH Vnormal Hopping Mode Occupied Bandwidth (MHz) 19.70 Report No.: RJ150107E07-2 Page No. 12 / 34 Report Format Verision: 6.1.1

Modulation: π/4-DQPSK Normal Mode: Environmental Conditions 25 deg.C, 60% RH Vnormal Hopping Mode Occupied Bandwidth (MHz) 78.60 AFH Mode: Environmental Conditions 25 deg.C, 60% RH Vnormal Hopping Mode Occupied Bandwidth (MHz) 20.10 Report No.: RJ150107E07-2 Page No. 13 / 34 Report Format Verision: 6.1.1

Modulation: 8DPSK Normal Mode: Environmental Conditions 25 deg.C, 60% RH Vnormal Hopping Mode Occupied Bandwidth (MHz) 78.40 AFH Mode: Environmental Conditions 25 deg.C, 60% RH Vnormal Hopping Mode Occupied Bandwidth (MHz) 20.00 Report No.: RJ150107E07-2 Page No. 14 / 34 Report Format Verision: 6.1.1

4.3 Spreading Bandwidth Measurement (90% power bandwidth) 4.3.1 Limits of Spreading Bandwidth and Spreading Factor Measurement Item Limit Remark Spreading Bandwidth ≧500kHz (For DSSS, FHSS) Spreading Factor ≧5 Operating frequency 2400 to 2483.5MHz 4.3.2 Test Setup Spectrum EUT Analyzer 4.3.3 Test Results Modulation: GFSK Normal Mode: Environmental 25 deg.C, 60% RH Conditions Vnormal Hopping Mode Occupied Bandwidth (MHz) Spreading Factor 70.80 70.80 NOTE: Spreading Factor: 90% channel power bandwidth / 1. AFH Mode: Environmental 25 deg.C, 60% RH Conditions Vnormal Hopping Mode Occupied Bandwidth (MHz) Spreading Factor 18.10 18.10 NOTE: Spreading Factor: 90% channel power bandwidth / 1. Report No.: RJ150107E07-2 Page No. 15 / 34 Report Format Verision: 6.1.1

Modulation: π/4-DQPSK Normal Mode: Environmental 25 deg.C, 60% RH Conditions Vnormal Hopping Mode Occupied Bandwidth (MHz) Spreading Factor 71.60 71.60 NOTE: Spreading Factor: 90% channel power bandwidth / 1. AFH Mode: Environmental 25 deg.C, 60% RH Conditions Vnormal Hopping Mode Occupied Bandwidth (MHz) Spreading Factor 18.30 18.30 NOTE: Spreading Factor: 90% channel power bandwidth / 1. Report No.: RJ150107E07-2 Page No. 16 / 34 Report Format Verision: 6.1.1

Modulation: 8DPSK Normal Mode: Environmental 25 deg.C, 60% RH Conditions Vnormal Hopping Mode Occupied Bandwidth (MHz) Spreading Factor 71.40 71.40 NOTE: Spreading Factor: 90% channel power bandwidth / 1. AFH Mode: Environmental 25 deg.C, 60% RH Conditions Vnormal Hopping Mode Occupied Bandwidth (MHz) Spreading Factor 18.00 18.00 NOTE: Spreading Factor: 90% channel power bandwidth / 1. Report No.: RJ150107E07-2 Page No. 17 / 34 Report Format Verision: 6.1.1

4.4 Spurious Emissions for Transmitter Measurement 4.4.1 Limits of Spurious Emissions Frequencies (MHz) Limit Operating frequency 2400 to 2483.5MHz 30.0MHz to 1000.0MHz ≦ 0.25 uW/100kHz 1000.0MHz to 2387MHz ≦ 2.5 uW/MHz 2387.0MHz to 2400.0MHz ≦ 25 uW/MHz 2483.5MHz to 2496.5MHz ≦ 25 uW/MHz 2496.5MHz to 12500.0MHz ≦ 2.5 uW/MHz 4.4.2 Teset Setup Spectrum EUT Analyzer Report No.: RJ150107E07-2 Page No. 18 / 34 Report Format Verision: 6.1.1

4.4.3 Test Results Modulation: GFSK Environmental 25 deg.C, 60% RH Conditions Test Channel CH0 (2402MHz) CH39 (2441MHz) Test Frequency Frequency Measured Frequency Measured Limit Result Condition Range (MHz) Value (MHz) Value 30.0MHz to 83.108 0.023044uW 582.415 0.018825uW 0.25uW PASS 1000.0MHz 1000.0MHz to 2270.145 0.032027uW 2309.328 0.044226uW 2.5uW PASS 2387MHz 2387.0MHz to Vnormal 2400.000 19.397911uW 2399.974 0.018482uW 25uW PASS 2400.0MHz 2483.5MHz to 2489.945 0.018425uW 2485.479 0.018944uW 25uW PASS 2496.5MHz 2496.5MHz to 3124.220 0.023262uW 3666.910 0.022346uW 2.5uW PASS 12500.0MHz Test Channel CH78 (2480MHz) Test Frequency Limit Result Frequency (MHz) Measured Value Condition Range 30.0MHz to 317.605 0.019423uW 0.25uW PASS 1000.0MHz 1000.0MHz to 2348.164 0.056843uW 2.5uW PASS 2387MHz 2387.0MHz to Vnormal 2392.245 0.020675uW 25uW PASS 2400.0MHz 2483.5MHz to 2483.500 0.873958uW 25uW PASS 2496.5MHz 2496.5MHz to 4137.074 0.022146uW 2.5uW PASS 12500.0MHz Report No.: RJ150107E07-2 Page No. 19 / 34 Report Format Verision: 6.1.1

Modulation: π/4-DQPSK Environmental 25 deg.C, 60% RH Conditions Test Channel CH0 (2402MHz) CH39 (2441MHz) Test Frequency Frequency Measured Frequency Measured Limit Result Condition Range (MHz) Value (MHz) Value 30.0MHz to 112.692 0.019466uW 92.808 0.01739uW 0.25uW PASS 1000.0MHz 1000.0MHz to 2270.492 0.022365uW 2308.981 0.036505uW 2.5uW PASS 2387MHz 2387.0MHz to Vnormal 2400.000 8.956478uW 2397.244 0.014132uW 25uW PASS 2400.0MHz 2483.5MHz to 2489.841 0.018055uW 2488.177 0.012837uW 25uW PASS 2496.5MHz 2496.5MHz to 7383.210 0.021462uW 3251.764 0.021368uW 2.5uW PASS 12500.0MHz Test Channel CH78 (2480MHz) Test Frequency Limit Result Frequency (MHz) Measured Value Condition Range 30.0MHz to 695.178 0.018007uW 0.25uW PASS 1000.0MHz 1000.0MHz to 2348.511 0.041634uW 2.5uW PASS 2387MHz 2387.0MHz to Vnormal 2391.959 0.017297uW 25uW PASS 2400.0MHz 2483.5MHz to 2483.500 0.742618uW 25uW PASS 2496.5MHz 2496.5MHz to 3609.389 0.023033uW 2.5uW PASS 12500.0MHz Report No.: RJ150107E07-2 Page No. 20 / 34 Report Format Verision: 6.1.1

Modulation: 8DPSK Environmental 25 deg.C, 60% RH Conditions Test Channel CH0 (2402MHz) CH39 (2441MHz) Test Frequency Frequency Measured Frequency Measured Limit Result Condition Range (MHz) Value (MHz) Value 30.0MHz to 160.222 0.018298uW 307.663 0.018931uW 0.25uW PASS 1000.0MHz 1000.0MHz to 2270.145 0.027354uW 2309.328 0.035419uW 2.5uW PASS 2387MHz 2387.0MHz to Vnormal 2400.000 9.556758uW 2399.919 0.013183uW 25uW PASS 2400.0MHz 2483.5MHz to 2490.474 0.020105uW 2488.856 0.014508uW 25uW PASS 2496.5MHz 2496.5MHz to 3074.202 0.021833uW 6958.061 0.019693uW 2.5uW PASS 12500.0MHz Test Channel CH78 (2480MHz) Test Frequency Limit Result Frequency (MHz) Measured Value Condition Range 30.0MHz to 564.955 0.021274uW 0.25uW PASS 1000.0MHz 1000.0MHz to 2016.324 0.013819uW 2.5uW PASS 2387MHz 2387.0MHz to Vnormal 2389.759 0.013627uW 25uW PASS 2400.0MHz 2483.5MHz to 2487.384 0.013578uW 25uW PASS 2496.5MHz 2496.5MHz to 7373.206 0.020939uW 2.5uW PASS 12500.0MHz Report No.: RJ150107E07-2 Page No. 21 / 34 Report Format Verision: 6.1.1

4.5 Antenna Power Measurement 4.5.1 Limits of Antenna Power EIRP (Max.) Modulation Frequency Band Antenna Power Omni-Directional System Used (Max.) Directional Case Case 12.14 dBm/MHz 22.14 dBm/MHz DS 2400 – 2483.5 MHz 10 mW/MHz (16.368 mW/MHz) (163.68 mW/MHz) 12.14 dBm/MHz 22.14 dBm/MHz OFDM (Note 1) 2400 – 2483.5 MHz 10 mW/MHz (16.368 mW/MHz) (163.68 mW/MHz) 9.14 dBm/MHz 19.14 dBm/MHz OFDM (Note 2) 2400 – 2483.5 MHz 5 mW/MHz (8.20mW/MHz) (82.04 mW/MHz) 6.91 dBm/MHz 16.91 dBm/MHz FH 2400 – 2483.5 MHz 3 mW/MHz (4.91 mW/MHz) (49.10 mW/MHz) Note: 1. Occupied bandwidth is less than 26MHz 2. Occupied bandwidth is more that 26MHz and less than 38MHz 3. The half-power beam width for directional antenna shall be 360/A degrees or less, where A is a ratio which causes the EIRP concerned to exceed the omnidirectional EIRP upper limit. 4. Tolerance of antenna power shall be +20% (upper value) and –80% (lower value). 4.5.2 Test Setup Power Meter EUT Report No.: RJ150107E07-2 Page No. 22 / 34 Report Format Verision: 6.1.1

4.5.3 Test Results Modulation: GFSK Normal Mode: Environmental Conditions 25 deg.C, 60% RH Conducted Rf Output Power Density (mW/MHz) Test Condition Max. Limit Hopping Mode (mW/MHz) Vnormal 0.189220 3 Rated Power 0.2 Tolerance Of Antenna Power 0.04 ~ 0.24 PIFA ANTENNA WITH ANTENNA GAIN: 3.62dBi Environmental Conditions 25 deg.C, 60% RH Radiated Rf Output Power Density (mW/MHz) Test Condition Max. Limit Hopping Mode (mW/MHz) Vnormal 0.435479 4.91 NOTE: The value of radiated RF output densities are "calculated" values. AFH Mode: Environmental Conditions 25 deg.C, 60% RH Conducted Rf Output Power Density (mW/MHz) Test Condition Max. Limit Hopping Mode (mW/MHz) Vnormal 0.740153 3 Rated Power 1 Tolerance Of Antenna Power 0.2 ~ 1.2 PIFA ANTENNA WITH ANTENNA GAIN: 3.62dBi Environmental Conditions 25 deg.C, 60% RH Radiated Rf Output Power Density (mW/MHz) Test Condition Max. Limit Hopping Mode (mW/MHz) Vnormal 1.703419 4.91 NOTE: The value of radiated RF output densities are "calculated" values. Report No.: RJ150107E07-2 Page No. 23 / 34 Report Format Verision: 6.1.1

Modulation: π/4-DQPSK Normal Mode: Environmental Conditions 25 deg.C, 60% RH Conducted Rf Output Power Density (mW/MHz) Test Condition Max. Limit Hopping Mode (mW/MHz) Vnormal 0.087045 3 Rated Power 0.2 Tolerance Of Antenna Power 0.04 ~ 0.24 PIFA ANTENNA WITH ANTENNA GAIN: 3.62dBi Environmental Conditions 25 deg.C, 60% RH Radiated Rf Output Power Density (mW/MHz) Test Condition Max. Limit Hopping Mode (mW/MHz) Vnormal 0.200329 4.91 NOTE: The value of radiated RF output densities are "calculated" values. AFH Mode: Environmental Conditions 25 deg.C, 60% RH Conducted Rf Output Power Density (mW/MHz) Test Condition Max. Limit Hopping Mode (mW/MHz) Vnormal 0.337714 3 Rated Power 1 Tolerance Of Antenna Power 0.2 ~ 1.2 PIFA ANTENNA WITH ANTENNA GAIN: 3.62dBi Environmental Conditions 25 deg.C, 60% RH Radiated Rf Output Power Density (mW/MHz) Test Condition Max. Limit Hopping Mode (mW/MHz) Vnormal 0.777229 4.91 NOTE: The value of radiated RF output densities are "calculated" values. Report No.: RJ150107E07-2 Page No. 24 / 34 Report Format Verision: 6.1.1

Modulation: 8DPSK Normal Mode: Environmental Conditions 25 deg.C, 60% RH Conducted Rf Output Power Density (mW/MHz) Test Condition Max. Limit Hopping Mode (mW/MHz) Vnormal 0.087648 3 Rated Power 0.2 Tolerance Of Antenna Power 0.04 ~ 0.24 PIFA ANTENNA WITH ANTENNA GAIN: 3.62dBi Environmental Conditions 25 deg.C, 60% RH Radiated Rf Output Power Density (mW/MHz) Test Condition Max. Limit Hopping Mode (mW/MHz) Vnormal 0.201717 4.91 NOTE: The value of radiated RF output densities are "calculated" values. AFH Mode: Environmental Conditions 25 deg.C, 60% RH Conducted Rf Output Power Density (mW/MHz) Test Condition Max. Limit Hopping Mode (mW/MHz) Vnormal 0.340055 3 Rated Power 1 Tolerance Of Antenna Power 0.2 ~ 1.2 PIFA ANTENNA WITH ANTENNA GAIN: 3.62dBi Environmental Conditions 25 deg.C, 60% RH Radiated Rf Output Power Density (mW/MHz) Test Condition Max. Limit Hopping Mode (mW/MHz) Vnormal 0.782617 4.91 NOTE: The value of radiated RF output densities are "calculated" values. Report No.: RJ150107E07-2 Page No. 25 / 34 Report Format Verision: 6.1.1

4.6 Spurious Emissions for Receiver 4.6.1 Limits of Spurious Emissions For Receiver Frequencies (MHz) Limit Below 1GHz ≦4nW (-54dBm) Above 1GHz ≦20nW (-47dBm) 4.6.2 Test Setup Spectrum EUT Analyzer Report No.: RJ150107E07-2 Page No. 26 / 34 Report Format Verision: 6.1.1

4.6.3 Test Result Environmental 25 deg.C, 60% RH Conditions Test Channel Channel 0 (2402MHz) Channel 39 (2441MHz) Test Frequency Frequency Measured Frequency Measured Limit Result Condition Range (MHz) Value (MHz) Value Below 1GHz 925.553 0.037199nW 626.065 0.02722nW 4nW PASS Vnormal Above 1GHz 6959.875 0.1999nW 3147.625 0.221042nW 20nW PASS Test Channel Channel 78 (2480MHz) Test Frequency Frequency (MHz) Limit Result Measured Value Condition Range Measured Value Below 1GHz 245.583 0.026283nW 4nW PASS Vnormal Above 1GHz 1753.250 0.331947nW 20nW PASS Report No.: RJ150107E07-2 Page No. 27 / 34 Report Format Verision: 6.1.1

4.7 Dwell Time 4.7.1 Limits of Dwell Time The frequency retention time in the frequency hopping method shall be 0.4 secondor less. The total sum of the frequency retention time in any frequency within the time obtained by multiplying the diffusion rate by 0.4 second shall be 0.4 second or shorter. Formula: (Normal mode) dwell time = [diffusion rate/ 79] x duty-cycle x 0.4 seconds (AFH mode) dwell time = [diffusion rate/20] x duty-cycle x 0.4 sec 4.7.2 Test Setup Spectrum EUT Analyzer Report No.: RJ150107E07-2 Page No. 28 / 34 Report Format Verision: 6.1.1

4.7.3 Test Result Modulation: GFSK Normal Mode: Test Spreading [Spreading Result Limit Mode Duty Cycle Condition Rate Rate/79]*0.4 (msec) (msec) DH1 70.80 0.358 0.296 105.968 400 Vnormal DH3 70.80 0.358 0.651 233.058 400 DH5 70.80 0.358 0.768 274.944 400 AFH Mode: Test Spreading [Spreading Result Limit Mode Duty Cycle Condition Rate Rate/20]*0.4 (msec) (msec) DH1 18.10 0.362 0.296 107.152 400 Vnormal DH3 18.10 0.362 0.651 235.662 400 DH5 18.10 0.362 0.768 278.016 400 Modulation: π/4-DQPSK Normal Mode: Test Spreading [Spreading Result Limit Mode Duty Cycle Condition Rate Rate/79]*0.4 (msec) (msec) DH1 71.60 0.363 0.280 101.640 400 Vnormal DH3 71.60 0.363 0.611 221.793 400 DH5 71.60 0.363 0.768 278.784 400 AFH Mode: Test Spreading [Spreading Result Limit Mode Duty Cycle Condition Rate Rate/20]*0.4 (msec) (msec) DH1 18.30 0.366 0.280 102.480 400 Vnormal DH3 18.30 0.366 0.611 223.626 400 DH5 18.30 0.366 0.768 281.088 400 Report No.: RJ150107E07-2 Page No. 29 / 34 Report Format Verision: 6.1.1

Modulation: 8DPSK Normal Mode: Test Spreading [Spreading Result Limit Mode Duty Cycle Condition Rate Rate/79]*0.4 (msec) (msec) DH1 71.40 0.362 0.304 110.048 400 Vnormal DH3 71.40 0.362 0.651 235.662 400 DH5 71.40 0.362 0.768 278.016 400 AFH Mode: Test Spreading [Spreading Result Limit Mode Duty Cycle Condition Rate Rate/20]*0.4 (msec) (msec) DH1 18.00 0.360 0.304 109.440 400 Vnormal DH3 18.00 0.360 0.651 234.360 400 DH5 18.00 0.360 0.768 276.480 400 Report No.: RJ150107E07-2 Page No. 30 / 34 Report Format Verision: 6.1.1

4.8 Interference Prevention Function 4.8.1 Limits of Interference Prevention Function Radio equipment used mainly on the same premises and automatically transmits or receives identification code. 4.8.2 Test Setup Receiver EUT Attenuation Equipment 4.8.3 Test Results Environmental Conditions 25 deg.C, 68% RH Link Mode Test Result BT PASS Report No.: RJ150107E07-2 Page No. 31 / 34 Report Format Verision: 6.1.1

5 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED CALIBRATION MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL AUTHORITY SPECTRUM ANALYZER FSP 40 100060 May 08, 2014 May 07, 2015 ETC R&S SPECTRUM ANALYZER FSV 40 100964 July 05, 2014 July 04, 2015 R&S R&S ESG VECTOR SIGNAL MY47271330 506 GENERATOR E4438C Apr. 28, 2014 Apr. 27, 2015 ETC 602 UNJ AGILENT DETECTOR 4503A 0306 NA NA NA NARDA POWER METER ML2495A 1014008 Apr. 30, 2014 Apr. 29, 2015 ETC ANRITSU POWER SENSOR MA2411B 0917122 Apr. 30, 2014 Apr. 29, 2015 ETC ANRITSU Oscilloscope TDS5104 B051449 Mar. 20, 2014 Mar. 19, 2015 ETC Tektronix POWER COMBINER ZFRSC-123-S F698501347_02 Mar. 06, 2014 Mar. 05, 2015 BV ADT MINI-CIRCUITS + POWER COMBINER SP63409 NA Dec. 24, 2014 Dec. 23, 2015 BV ADT SIGATEK NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested Date: Feb. 13, 2015 Report No.: RJ150107E07-2 Page No. 32 / 34 Report Format Verision: 6.1.1

6 Photographs of the Test Configuration Report No.: RJ150107E07-2 Page No. 33 / 34 Report Format Verision: 6.1.1

Appendix - Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RJ150107E07-2 Page No. 34 / 34 Report Format Verision: 6.1.1


Document Created: 2015-03-19 10:12:25
Document Modified: 2015-03-19 10:12:25
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC