Test Report Co-Location

FCC ID: PPD-QCNFA344A

Test Report

Download: PDF
FCCID_2602791

Supplemental “Transmit Simultaneously” Test Report Report No.: RF150107E06-4 FCC ID: PPD-QCNFA344A Test Model: QCNFA344A Received Date: Jan. 07, 2015 Test Date: Feb. 06 to 25, 2015 Issued Date: Mar. 11, 2015 Applicant: Qualcomm Atheros, Inc. Address: 1700 Technology Drive, San Jose, CA 95110 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150107E06-4 Page No. 1 / 25 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Antenna ........................................................................................................................ 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Description of Support Units .............................................................................................................. 11 3.3.1 Configuration of System under Test ................................................................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures ................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 14 4.1.5 Test Setup .......................................................................................................................................... 15 4.1.6 EUT Operating Conditions................................................................................................................. 15 4.1.7 Test Results ....................................................................................................................................... 16 4.2 Conducted Emission Measurement .................................................................................................. 18 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 18 4.2.2 Test Instruments ................................................................................................................................ 18 4.2.3 Test Procedures ................................................................................................................................. 19 4.2.4 Deviation from Test Standard ............................................................................................................ 19 4.2.5 Test Setup .......................................................................................................................................... 19 4.2.6 EUT Operating Conditions................................................................................................................. 19 4.2.7 Test Results ....................................................................................................................................... 20 4.3 Conducted Out of Band Emission Measurement .............................................................................. 22 4.3.1 Limits of Conducted Out of Band Emission Measurement................................................................ 22 4.3.2 Test Setup .......................................................................................................................................... 22 4.3.3 Test Instruments ................................................................................................................................ 22 4.3.4 Test Procedures ................................................................................................................................. 22 4.3.5 Deviation from Test Standard ............................................................................................................ 22 4.3.6 EUT Operating Conditions................................................................................................................. 22 4.3.7 Test Results ....................................................................................................................................... 22 5 Pictures of Test Arrangements .......................................................................................................... 24 Appendix – Information on the Testing Laboratories ................................................................................ 25 Report No.: RF150107E06-4 Page No. 2 / 25 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF150107E06-4 Original release. Mar. 11, 2015 Report No.: RF150107E06-4 Page No. 3 / 25 Report Format Version: 6.1.1

5o ve s ul s UQF 1028 1 Certificate of Conformity Product: 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card Brand: Qualcomm Atheros Test Model: QCNFA344A Sample Status: R&D SAMPLE Applicant: Qualcomm Atheros, Inc. Test Date: Feb. 06 to 25, 2015 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2009 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample‘s EMC characteristics under the conditions specified in this report. Prepared by : ;E—; LL—— , Date: Mar. 11, 2015 Lori Chung / Specialist Approved by : Tsm , Date: Mar. 11, 2015 A/Iay Chen /J'Ifianager Report No.: RF150107E06—4 Page No. 4 / 25 Report Format Version: 6.1.1

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (SECTION 15.247) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission PASS Minimum passing margin is -16.82dB at 2.06641MHz. 15.205 / Meet the requirement of limit. Radiated Emissions and Band Edge 15.209 / PASS Minimum passing margin is -5.3dB at Measurement 15.247(d) 240.15MHz. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expended Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.86 dB Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.43 dB 1GHz ~ 6GHz 3.72 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 4.00 dB 18GHz ~ 40GHz 4.11 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF150107E06-4 Page No. 5 / 25 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card Brand Qualcomm Atheros Test Model QCNFA344A Status of EUT R&D SAMPLE Power Supply Rating 3.3Vdc form host equipment WLAN: CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM 256QAM for OFDM in 11ac mode and VHT (20/40) mode in 2.4GHz Modulation Type Bluetooth (EDR): GFSK, π/4-DQPSK, 8DPSK Bluetooth (LE): GFSK WLAN: DSSS,OFDM Modulation Technology Bluetooth (EDR): FHSS Bluetooth (LE): DTS WLAN: 802.11b: up to 11Mbps 802.11a/g: up to 54Mbps 802.11n : up to 300Mbps Transfer Rate 802.11ac: up to 866.7Mbps Bluetooth (EDR): up to 3Mbps Bluetooth (LE): up to 1Mbps WLAN: For 15.407 5.18 ~ 5.24GHz, 5.26 ~ 5.32GHz, 5.50 ~ 5.72GHz, 5.745 ~ 5.825GHz Operating Frequency For 15.247 2.412 ~ 2.472GHz Bluetooth: 2402MHz ~ 2480MHz WLAN: For 15.407 25 for 802.11a, 802.11n (HT20), 802.11ac (VHT20) 12 for 802.11n (HT40), 802.11ac (VHT40) 6 for 802.11ac (VHT80) Number of Channel For 15.247 13 for 802.11b/g, 802.11n (HT20), VHT20 9 for 802.11n (HT40), VHT40 Bluetooth (EDR): 79 Bluetooth (LE): 40 Report No.: RF150107E06-4 Page No. 6 / 25 Report Format Version: 6.1.1

WLAN: For 15.407 802.11a: 73.721mW 802.11ac (VHT20): 73.119mW 802.11ac (VHT40): 60.324mW 802.11ac (VHT80): 47.178mW Output Power For 15.247 802.11b: 302.764mW 802.11g: 524.318mW VHT20: 503.893mW VHT40: 483.605mW Bluetooth (EDR): 19.634mW Bluetooth (LE): 2.773mW Antenna Type See item 3.2 Antenna Connector See item 3.2 Accessory Device NA Data Cable Supplied NA Note: 1. There are Bluetooth technology and WLAN technology used for the EUT. 2. The EUT incorporates a 2T2R function. 2.4GHz Band MODULATION MODE DATA RATE (MCS) TX & RX CONFIGURATION 802.11b 1 ~ 11Mbps 2TX 2RX 802.11g 6 ~ 54Mbps 2TX 2RX MCS 0~7 2TX 2RX 802.11n (HT20) MCS 8~15 2TX 2RX MCS 0~7 2TX 2RX 802.11n (HT40) MCS 8~15 2TX 2RX MCS 0~8, Nss=1 2TX 2RX VHT20 MCS 0~8, Nss=2 2TX 2RX MCS 0~9, Nss=1 2TX 2RX VHT40 MCS 0~9, Nss=2 2TX 2RX 5GHz Band MODULATION MODE DATA RATE (MCS) TX & RX CONFIGURATION 802.11a 6 ~ 54Mbps 2TX 2RX MCS 0~7 2TX 2RX 802.11n (HT20) MCS 8~15 2TX 2RX MCS 0~7 2TX 2RX 802.11n (HT40) MCS 8~15 2TX 2RX MCS 0~8, Nss=1 2TX 2RX 802.11ac (VHT20) MCS 0~8, Nss=2 2TX 2RX MCS 0~9, Nss=1 2TX 2RX 802.11ac (VHT40) MCS 0~9, Nss=2 2TX 2RX MCS 0~9, Nss=1 2TX 2RX 802.11ac (VHT80) MCS 0~9, Nss=2 2TX 2RX Report No.: RF150107E06-4 Page No. 7 / 25 Report Format Version: 6.1.1

3. WLAN/BT coexistence mode: © 2x2 WLAN + BT; ® 5GHz 802.11a/an (or 11ac) transmit concurrent with BT. m 2.4GHz: timely shared coexistence. 4. The emission (conducted & radiated emission) of the simultaneous operation (WiFi <5GHz> & Bluetooth) have been evaluated and no non—compliance found. The detail combinations of transmitters / frequencies / modes as below table Mode Available Tested Channel Modulation Channel Technology 5 GHz (802.118) 36 to 165 157 OFDM + Bluetooth (GESK) 0 to 78 39 FHSS 5.. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer‘s specifications or user‘s manual. Report No.: RF150107E06—4 Page No. 8 / 25 Report Format Version: 6.1.1

3.2 Description of Antenna The antenna gain was declared by client; please refer to the following table: 2.4GHz Gain 2.4GHz Cable Transmitter Ant. with 5GHz Gain with Cable 5G Cable Loss Connector Brand Model Length Circuit Type cable loss cable loss (dBi) Loss (dBi) Type (mm) (dBi) (dBi) Band 1&2: 2.56 Band 1&2: 1.70 Chain (0) WNC 81-EBJ15.005 PIFA 3.00 Band 3: 4.76 1.15 Band 3: 1.74 IPEX 300 Band 4: 4.76 Band 4: 1.79 Band 1&2: 3.08 Band 1&2: 1.70 Chain (1) WNC 81-EBJ15.005 PIFA 3.62 Band 3: 3.31 1.15 Band 3: 1.74 IPEX 300 Band 4: 2.42 Band 4: 1.79 Note: 1. Above antenna gains of antenna are Total (H+V). 2. All of antenna can be application for WLAN and Bluetooth. Report No.: RF150107E06-4 Page No. 9 / 25 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G PLC OB - √ √ √ √ - RE1G: Radiated Emission above 1GHz & Where RE<1G: Radiated Emission below 1GHz Bandedge Measurement PLC: Power Line Conducted Emission OB: Conducted Out-Band Emission Measurement Radiated Emission Test (Above 1GHz): Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY (Mbps) 5 GHz 36 to 165 157 OFDM 6 (802.11a) + 0 to 78 39 FHSS 3 Bluetooth (GFSK) Radiated Emission Test (Below 1GHz): Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY (Mbps) 5 GHz 36 to 165 157 OFDM 6 (802.11a) + 0 to 78 39 FHSS 3 Bluetooth (GFSK) Power Line Conducted Emission Test: Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY (Mbps) 5 GHz 36 to 165 157 OFDM 6 (802.11a) + 0 to 78 39 FHSS 3 Bluetooth (GFSK) Conducted Out-Band Emission Measurement: Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY (Mbps) 5 GHz 36 to 165 157 OFDM 6 (802.11a) + 0 to 78 39 FHSS 3 Bluetooth (GFSK) Test Condition: INPUT POWER APPLICABLE TO ENVIRONMENTAL CONDITIONS TESTED BY (SYSTEM) RE1G 22deg. C, 69%RH 120Vac, 60Hz Gary Cheng RE<1G 21deg. C, 70%RH 120Vac, 60Hz Gary Cheng PLC 20deg. C, 60%RH 120Vac, 60Hz Barry Lee OB 15deg. C, 57%RH 120Vac, 60Hz Anderson Chen Report No.: RF150107E06-4 Page No. 10 / 25 Report Format Version: 6.1.1

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Product Brand Model No. Serial No. FCC ID Remark NOTEBOOK A DELL E5430 HYV4VY1 FCC DoC Provided by Lab COMPUTER Qualcomm B PCI-E Test tool NA NA NA Supplied by Client Atheros NOTE: All power cords of the above support units are non-shielded (1.8 m). 3.3.1 Configuration of System under Test NOTEBOOK PCI-E Test tool (B) COMPUTER (A) EUT Report No.: RF150107E06-4 Page No. 11 / 25 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 30dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF150107E06-4 Page No. 12 / 25 Report Format Version: 6.1.1

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL MXE EMI Receiver N9038A MY50010156 Aug. 11, 2014 Aug. 10, 2015 Agilent Pre-Amplifier ZFL-1000VH2 AMP-ZFL-04 Nov. 12, 2014 Nov. 11, 2015 Mini-Circuits B Trilog Broadband Antenna VULB 9168 9168-361 Feb. 27, 2014 Feb. 26, 2015 SCHWARZBECK RF Cable NA CHHCAB_001 Oct. 05, 2014 Oct. 04, 2015 Horn_Antenna AIH.8018 0000220091110 Aug. 26, 2014 Aug. 25, 2015 AISI Pre-Amplifier 8449B 300801923 Oct. 28, 2014 Oct. 27, 2015 Agilent 131206 RF Cable NA 131215 Jan. 16, 2015 Jan. 15, 2016 SNMY23685/4 Spectrum Analyzer FSV40 100964 July 05, 2014 July 04, 2015 R&S Pre-Amplifier EMC184045 980143 Jan. 16, 2015 Jan. 15, 2016 EMCI Horn_Antenna BBHA 9170 9170-424 Aug. 26, 2014 Aug. 25, 2015 SCHWARZBECK RF104-121 RF Cable NA Dec. 11, 2014 Dec. 10, 2015 RF104-204 ADT_Radiated Software NA NA NA _V8.7.07 Antenna Tower & Turn Table NA NA NA NA CT SPECTRUM ANALYZER FSP 40 100060 May 08, 2014 May 07, 2015 R&S Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5 The CANADA Site Registration No. is IC 7450H-3. 6 Tested Date: Feb. 16 to 25, 2015 Report No.: RF150107E06-4 Page No. 13 / 25 Report Format Version: 6.1.1

4.1.3 Test Procedures a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF150107E06-4 Page No. 14 / 25 Report Format Version: 6.1.1

4.1.5 Test Setup <Frequency Range below 1GHz> Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver <Frequency Range above 1GHz> Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions 1. Connect the EUT with the support unit A (Notebook Computer) which is placed on a testing table. 2. The communication partner run test program “QCART Version: 3.0.33.0” to enable EUT under transmission/receiving condition continuously at specific channel frequency. Report No.: RF150107E06-4 Page No. 15 / 25 Report Format Version: 6.1.1

4.1.7 Test Results Above 1GHz Data DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 40GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 4882.00 51.8 PK 74.0 -22.2 1.08 H 99 44.59 7.21 2 4882.00 37.9 AV 54.0 -16.1 1.08 H 99 30.69 7.21 3 7323.00 59.3 PK 74.0 -14.7 1.02 H 177 47.55 11.75 4 7323.00 46.7 AV 54.0 -7.3 1.02 H 177 34.95 11.75 5 11570.00 54.8 PK 74.0 -19.2 1.00 H 203 40.37 14.43 6 11570.00 40.9 AV 54.0 -13.1 1.00 H 203 26.47 14.43 7 #17355.00 61.3 PK 74.0 -12.7 1.52 H 139 37.36 23.94 8 #17355.00 48.4 AV 54.0 -5.6 1.52 H 139 24.46 23.94 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 4882.00 51.2 PK 74.0 -22.8 1.02 V 200 43.99 7.21 2 4882.00 39.6 AV 54.0 -14.4 1.02 V 200 32.39 7.21 3 7323.00 58.9 PK 74.0 -15.1 1.20 V 268 47.15 11.75 4 7323.00 47.7 AV 54.0 -6.3 1.20 V 268 35.95 11.75 5 11570.00 54.1 PK 74.0 -19.9 1.01 V 184 39.67 14.43 6 11570.00 41.0 AV 54.0 -13.0 1.01 V 184 26.57 14.43 7 #17355.00 59.7 PK 74.0 -14.3 1.24 V 135 35.76 23.94 8 #17355.00 47.2 AV 54.0 -6.8 1.24 V 135 23.26 23.94 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " # ": The radiated frequency is out of the restricted band. Report No.: RF150107E06-4 Page No. 16 / 25 Report Format Version: 6.1.1

Below 1GHz Data DETECTOR FREQUENCY RANGE Below 1GHz Quasi-Peak (QP) FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 166.22 36.4 QP 43.5 -7.1 1.10 H 130 49.62 -13.24 2 240.15 40.7 QP 46.0 -5.3 1.10 H 100 54.78 -14.06 3 252.90 35.5 QP 46.0 -10.5 1.00 H 102 49.35 -13.83 4 257.20 34.0 QP 46.0 -12.0 1.00 H 152 47.71 -13.71 5 335.90 36.4 QP 46.0 -9.6 1.00 H 100 47.24 -10.80 6 608.70 36.2 QP 46.0 -9.9 1.20 H 133 40.72 -4.57 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 134.78 22.4 QP 43.5 -21.1 1.00 V 100 36.15 -13.73 2 166.35 32.2 QP 43.5 -11.3 1.00 V 110 45.44 -13.25 3 240.10 30.6 QP 46.0 -15.4 1.00 V 58 44.64 -14.07 4 335.38 31.2 QP 46.0 -14.8 1.00 V 42 42.02 -10.80 5 608.58 28.7 QP 46.0 -17.4 1.00 V 152 33.22 -4.57 6 611.14 27.6 QP 46.0 -18.5 1.00 V 100 32.06 -4.51 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF150107E06-4 Page No. 17 / 25 Report Format Version: 6.1.1

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 100375 Apr. 29, 2014 Apr. 28, 2015 ROHDE & SCHWARZ Line-Impedance Stabilization Network NSLK-8127 8127-522 Sep. 15, 2014 Sep. 14, 2015 (for EUT) SCHWARZBECK Line-Impedance Stabilization Network ENV216 100071 Nov. 10, 2014 Nov. 09, 2015 (for Peripheral) ROHDE & SCHWARZ RF Cable 5DFB COCCAB-001 Mar. 10 , 2014 Mar. 09, 2015 (JYEBAO) 50 ohms Terminator N/A EMC-03 Sep. 22, 2014 Sep. 21, 2015 50 ohms Terminator N/A EMC-02 Sep. 30, 2014 Sep. 29, 2015 BV Software ADT_Cond_V7.3.7. NA NA NA ADT 3 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. 4 Tested Date: Feb. 17, 2015 Report No.: RF150107E06-4 Page No. 18 / 25 Report Format Version: 6.1.1

4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF150107E06-4 Page No. 19 / 25 Report Format Version: 6.1.1

4.2.7 Test Results Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Freq. Corr. Reading Value Emission Level Limit Margin No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.19297 0.07 27.58 22.76 27.65 22.83 63.91 53.91 -36.26 -31.08 2 0.42734 0.09 29.34 26.53 29.43 26.62 57.30 47.30 -27.87 -20.68 3 0.88828 0.12 25.42 21.81 25.54 21.93 56.00 46.00 -30.46 -24.07 4 2.06641 0.18 32.01 29.00 32.19 29.18 56.00 46.00 -23.81 -16.82 5 6.12891 0.32 13.81 9.57 14.13 9.89 60.00 50.00 -45.87 -40.11 6 15.54688 0.60 14.34 10.00 14.94 10.60 60.00 50.00 -45.06 -39.40 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level – Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF150107E06-4 Page No. 20 / 25 Report Format Version: 6.1.1

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Freq. Corr. Reading Value Emission Level Limit Margin No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15781 0.06 31.15 23.71 31.21 23.77 65.58 55.58 -34.36 -31.80 2 0.18516 0.06 27.94 22.02 28.00 22.08 64.25 54.25 -36.25 -32.17 3 0.42734 0.09 30.97 27.70 31.06 27.79 57.30 47.30 -26.24 -19.51 4 1.92188 0.18 31.75 28.79 31.93 28.97 56.00 46.00 -24.07 -17.03 5 3.45313 0.24 19.03 13.01 19.27 13.25 56.00 46.00 -36.73 -32.75 6 7.56250 0.38 22.81 18.28 23.19 18.66 60.00 50.00 -36.81 -31.34 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level – Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF150107E06-4 Page No. 21 / 25 Report Format Version: 6.1.1

4.3 Conducted Out of Band Emission Measurement 4.3.1 Limits of Conducted Out of Band Emission Measurement Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.3.2 Test Setup SPECTRUM EUT Attenuator ANALYZER 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedures MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. 4.3.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF150107E06-4 Page No. 22 / 25 Report Format Version: 6.1.1

5GHz 802.11a CH157 + Bluetooth GFSK CH39 Report No.: RF150107E06-4 Page No. 23 / 25 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF150107E06-4 Page No. 24 / 25 Report Format Version: 6.1.1

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF150107E06-4 Page No. 25 / 25 Report Format Version: 6.1.1


Document Created: 2019-09-27 07:16:00
Document Modified: 2019-09-27 07:16:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC