Test Report JBP

FCC ID: PPD-QCASP141

Test Report

Download: PDF
FCCID_2185946

FCC DoC TEST REPORT REPORT NO. : FC131022E03 MODEL NO. : QCASP141 RECEIVED : Oct. 22, 2013 TESTED : Jan. 22 to 27, 2014 ISSUED : Feb. 06, 2014 APPLICANT : Qualcomm Atheros, Inc. ADDRESS : 1700 Technology Drive, San Jose, CA 95110 ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: FC131022E03 1 of 28 Report Format Version 5.0.2

Table of Contents RELEASE CONTROL RECORD................................................................................. 3 1 CERTIFICATION ............................................................................................. 4 2 SUMMARY OF TEST RESULTS ..................................................................... 5 2.1 MEASUREMENT UNCERTAINTY .................................................................. 5 3 GENERAL INFORMATION ............................................................................. 6 3.1 GENERAL DESCRIPTION OF EUT................................................................ 6 3.2 ANTENNA SPECIFICATIONS ......................................................................... 7 3.3 GENERAL DESCRIPTION OF TEST MODE .................................................. 7 3.4 DESCRIPTION OF SUPPORT UNITS ............................................................ 8 3.5 CONFIGURATION OF SYSTEM UNDER TEST ............................................. 9 4 EMISSION TEST............................................................................................11 4.1 CONDUCTED EMISSION MEASUREMENT .................................................11 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT...............................11 4.1.2 TEST INSTRUMENTS ...................................................................................11 4.1.3 TEST PROCEDURE ..................................................................................... 12 4.1.4 DEVIATION FROM TEST STANDARD ......................................................... 12 4.1.5 TEST SETUP ................................................................................................ 12 4.1.6 EUT OPERATING CONDITIONS .................................................................. 13 4.1.7 TEST RESULTS ............................................................................................ 14 4.2 RADIATED EMISSION MEASUREMENT ..................................................... 16 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................... 16 4.2.2 TEST INSTRUMENTS .................................................................................. 18 4.2.3 TEST PROCEDURE ..................................................................................... 20 4.2.4 DEVIATION FROM TEST STANDARD ......................................................... 20 4.2.5 TEST SETUP ................................................................................................ 21 4.2.6 EUT OPERATING CONDITIONS .................................................................. 21 4.2.7 TEST RESULTS ............................................................................................ 22 5 PHOTOGRAPHS OF THE TEST CONFIGURATION.................................... 26 6 INFORMATION ON THE TESTING LABORATORIES .................................. 27 7 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ......................................................... 28 Report No.: FC131022E03 2 of 28 Report Format Version 5.0.2

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED FC131022E03 Original release Feb. 06, 2014 Report No.: FC131022E03 3 of 28 Report Format Version 5.0.2

1 CERTIFICATION PRODUCT : 1x1 802.11b/g/n module BRAND NAME : Qualcomm Atheros MODEL NO. : QCASP141 TEST SAMPLE : R&D SAMPLE APPLICANT : Qualcomm Atheros, Inc. TESTED : Jan. 22 to 27, 2014 STANDARDS : FCC Part 15, Subpart B, Class B ICES-003: 2012 Issue 5, Class B ANSI C63.4-2009 The above equipment (Model: QCASP141) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Feb. 06, 2014 ( Elsie Hsu, Specialist ) APPROVED BY : , DATE: Feb. 06, 2014 ( Ken Lu, Manager ) Report No.: FC131022E03 4 of 28 Report Format Version 5.0.2

2 SUMMARY OF TEST RESULTS Standard Test Type Result Remarks Meets Class B Limit FCC Part 15 Conducted Test PASS Minimum passing margin is Subpart B, Class B -13.08 dB at 0.16172MHz ICES-003: 2012 Meets Class B Limit Issue 5, Class B Radiated Test PASS Minimum passing margin is -1.95 dB at 166.09 MHz 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Value Conducted emissions 2.98 dB Radiated emissions (30MHz-1GHz) 4.25 dB Radiated emissions (1GHz-6GHz) 3.65 dB Radiated emissions (6GHz-18GHz) 3.50 dB The listed uncertainties are the worst case uncertainty for the entire range of measurement. Please note that the uncertainty values are provided for informational purposes only and are not used in determining the PASS/FAIL results. Report No.: FC131022E03 5 of 28 Report Format Version 5.0.2

3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT 1x1 802.11b/g/n module MODEL NO. QCASP141 POWER SUPPLY DC 3.3V from host equipment POWER CORD NA DATA CABLE NA ASSOCIATED NA DEVICES NOTE: 1. The EUT is a 2.4GHz WLAN device. 2. The modular has two variant designs as following table: Variant No. Description Remark SKU #1 Thin Total 26 pins are pulled out on thin module. SKU #2 SP141 Total 27 pins are pulled out on SP141. Note: 1. The pin, EXT_ANT for external antenna which is on SP141 module is deleted on thin module. 2. From the above variant designs, the spurious emission worst case was found in SKU #1. Therefore only the test data of the mode was recorded in this report. 3. The EUT incorporates a SISO function. MODULATION MODE TX/RX FUNCTION 802.11b 1TX/1RX 802.11g 1TX/1RX 802.11n (HT20) 1TX/1RX 802.11n (HT40) 1TX/1RX 4. The above EUT information was declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: FC131022E03 6 of 28 Report Format Version 5.0.2

3.2 ANTENNA SPECIFICATIONS The declared antenna gain is 3.62dBi, this antenna gain was used for conducted spurious calculations. 如需寫成表格請參考 130423E07 3.3 GENERAL DESCRIPTION OF TEST MODE The EUT is tested under following test mode: Test Mode Variant No. Description Mode 1 SKU #1 Thin NOTE: The test Configuration was defined by the applicant requirement. NOTE: The test Configuration was defined by the applicant requirement. Report No.: FC131022E03 7 of 28 Report Format Version 5.0.2

3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Product Brand Model No. Serial No. FCC ID Remark Qualcomm A. EUT QCASP141 NA FCC DoC Approved - Atheros NOTEBOOK B. DELL E6420 H62T3R1 FCC DoC Provided by Lab COMPUTER C. iPod shuffle Apple MD778TA/A CC4JMFL0F4T1 NA Provided by Lab D. Matrix Printer EPSON LQ-300+II G88Y074083 FCC DoC Provided by Lab E. MOUSE DELL MOC5UO l1401LVG FCC DoC Provided by Lab F. USB TEST TOOL NA NA NA NA Supplied by client G. 2.4G WiFi AP Cisco NA NA NA Provided by Lab NOTE: 1. All power cords of the above support units are non-shielded (1.8 m). 2. Items F-H acted as communication partners to transfer data. Shielded Cores No. Cable Qty. Length (m) Remark (Yes/ No) (Number) 1. USB 1 0.1 Y 0 Provided by Lab 2. USB 1 1.8 Y 0 Provided by Lab 3. USB 1 1.8 Y 0 Provided by Lab 4. USB 1 1 Y 0 Provided by Lab NOTE: 1. The core(s) is(are) originally attached to the cable(s). Report No.: FC131022E03 8 of 28 Report Format Version 5.0.2

3.5 CONFIGURATION OF SYSTEM UNDER TEST For Conducted / Radiated test: 4 USB TEST EUT(A) TOOL (F) NOTEBOOK 1 i-Pod shuffle (C) COMPUTER(B) 2 PRINTER (D) 3 MOUSE (E) Remote site 2.4G WiFi AP (G) Report No.: FC131022E03 9 of 28 Report Format Version 5.0.2

For Immunity test: 1 USB TEST EUT(A) TOOL (C) NOTEBOOK COMPUTER(B) Remote site 2.4G WiFi AP (D) Report No.: FC131022E03 10 of 28 Report Format Version 5.0.2

4 EMISSION TEST 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15, Subpart B (Section: 15.107) ICES-003:2012 Issue 5 (section: 6.1) FREQUENCY Class A (dBuV) Class B (dBuV) (MHz) Quasi-peak Average Quasi-peak Average 0.15 - 0.5 79 66 66 - 56 56 - 46 0.50 - 5.0 73 60 56 46 5.0 - 30.0 73 60 60 50 NOTE: (1) The lower limit shall apply at the transition frequencies. (2) The limit decreases linearly with the logarithm of the frequency in the range 0.15 to 0.50 MHz 4.1.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 100287 Feb. 28, 2013 Feb. 27, 2014 ROHDE & SCHWARZ Line-Impedance Stabilization Network NSLK-8127 5127-523 Oct. 02, 2013 Oct. 01, 2014 (for EUT) ROHDE & SCHWARZ Line-Impedance Stabilization Network ENV216 100071 Nov. 13, 2013 Nov. 12, 2014 (for Peripheral) ROHDE & SCHWARZ RF Cable 5DFB COACAB-001 May 27, 2013 May 26, 2014 (JYEBAO) 50 ohms Terminator 50 3 Oct. 17, 2013 Oct. 16, 2014 50 ohms Terminator N/A EMC-04 Oct. 17, 2013 Oct. 16, 2014 BV Software ADT_Cond_V7.3.7 NA NA NA ADT .3 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. A. 3 The VCCI Con A Registration No. is C-817. 4. Tested Date: Jan. 27, 2014 Report No.: FC131022E03 11 of 28 Report Format Version 5.0.2

4.1.3 TEST PROCEDURE a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. 4.1.4 DEVIATION FROM TEST STANDARD No deviation 4.1.5 TEST SETUP V e r ti c a l R e f e re n c e G r o u nd P la n e Te s t R e c e iv e r EUT 4 0cm 80 cm L IS N H o ri zo n t a l R e f e r e n c e G ro un d P la n e N o t e : 1 .S u p p o rt u n it s w e r e c o n n e c te d t o s e c o n d L IS N . For the actual2 .B o th test o f L IS N s ( Aplease configuration, M N ) a re 8 0 to refer cmthef ro T an– m E U item related d Photographs a t l e a s t 8 0 c of m the Test Configuration. Report No.: FC131022E03 12 of 28 Report Format Version 5.0.2

4.1.6 EUT OPERATING CONDITIONS 1. Connect the EUT with the support unit B (NB) which is placed on a testing table. 2. Support unit B (NB) runs test program “ping.exe” to link with support unit G (2.4G WiFi AP) via EUT by wireless. 3. Support unit B (NB) scrolls "H" patterns on its screen Report No.: FC131022E03 13 of 28 Report Format Version 5.0.2

4.1.7 TEST RESULTS TEST MODE Mode 1 PHASE Line (L) DETECTOR Quasi-Peak (QP) / INPUT POWER 120Vac, 60 Hz FUNCTION & Average (AV), (SYSTEM) BANDWIDTH 9 kHz ENVIRONMENTAL 25 deg. C, 67 % RH TESTED BY Jason Huang CONDITIONS Freq. Corr. Reading Value Emission Level Limit Margin No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.16172 0.05 43.50 41.82 43.55 41.87 65.38 55.38 -21.82 -13.50 2 0.18516 0.06 38.00 30.38 38.06 30.44 64.25 54.25 -26.19 -23.81 3 0.57578 0.12 31.18 23.17 31.30 23.29 56.00 46.00 -24.70 -22.71 4 0.81797 0.12 29.58 19.62 29.70 19.74 56.00 46.00 -26.30 -26.26 5 3.23828 0.28 27.06 22.10 27.34 22.38 56.00 46.00 -28.66 -23.62 6 13.94141 0.60 23.55 18.80 24.15 19.40 60.00 50.00 -35.85 -30.60 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level – Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FC131022E03 14 of 28 Report Format Version 5.0.2

TEST MODE Mode 1 PHASE Neutral (N) DETECTOR Quasi-Peak (QP) / INPUT POWER 120Vac, 60 Hz FUNCTION & Average (AV), (SYSTEM) BANDWIDTH 9 kHz ENVIRONMENTAL 25 deg. C, 67 % RH TESTED BY Jason Huang CONDITIONS Freq. Corr. Reading Value Emission Level Limit Margin No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.16172 0.05 43.92 42.25 43.97 42.30 65.38 55.38 -21.41 -13.08 2 0.18906 0.05 35.72 21.68 35.77 21.73 64.08 54.08 -28.31 -32.35 3 0.58359 0.12 31.84 24.30 31.96 24.42 56.00 46.00 -24.04 -21.58 4 0.81016 0.13 30.08 22.42 30.21 22.55 56.00 46.00 -25.79 -23.45 5 0.91563 0.14 26.23 18.20 26.37 18.34 56.00 46.00 -29.63 -27.66 6 3.09375 0.22 27.43 22.01 27.65 22.23 56.00 46.00 -28.35 -23.77 REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level – Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: FC131022E03 15 of 28 Report Format Version 5.0.2

4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15, Subpart B (section: 15.109) ICES-003:2012 Issue 5 (section: 6.2) Emissions radiated outside of the specified bands, shall be according to the general radiated limits as following: Radiated Emissions Limits at 10 meters (dBμV/m) FCC 15B/ FCC 15B / Frequencies CISPR 22, CISPR 22, ICES-003, ICES-003, (MHz) Class A Class B Class A Class B 30-88 39 29.5 88-216 43.5 33.1 40 30 216-230 46.4 35.6 230-960 47 37 960-1000 49.5 43.5 1000-3000 Avg: 49.5 Avg: 43.5 Not defined Not defined Above 3000 Peak: 69.5 Peak: 63.5 Not defined Not defined Radiated Emissions Limits at 3 meters (dBμV/m) FCC 15B / FCC 15B / Frequencies CISPR 22, CISPR 22, ICES-003, ICES-003, (MHz) Class A Class B Class A Class B 30-88 49.5 40 88-216 54 43.5 50.5 40.5 216-230 56.9 46 230-960 57.5 47.5 960-1000 60 54 1000-3000 Avg: 56 Avg: 50 Avg: 60 Avg: 54 Peak: 76 Peak: 70 Above 3000 Peak: 80 Peak: 74 Avg: 60 Avg: 54 Peak: 80 Peak: 74 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. 4. QP detector shall be applied if not specified. Report No.: FC131022E03 16 of 28 Report Format Version 5.0.2

FREQUENCY RANGE OF RADIATED MEASUREMENT (For unintentional radiators) Highest frequency generated or used in Upper frequency of measurement the device or on which the device range (MHz) operates or tunes (MHz) Below 1.705 30 1.705-108 1000 108-500 2000 500-1000 5000 5th harmonic of the highest frequency or Above 1000 40GHz, whichever is lower Report No.: FC131022E03 17 of 28 Report Format Version 5.0.2

4.2.2 TEST INSTRUMENTS For below 1GHz test DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Analyzer Spectrum U3751 160200410 Sep. 05, 2013 Sep. 04, 2014 ADVANTEST Test Receiver ESCS 30 100027 May 14, 2013 May 13, 2014 ROHDE & SCHWARZ Broadband Antenna VULB-9168 263 Mar. 26, 2013 Mar. 25, 2014 SCHWARZBECK RF Switches EM-H-01-1 1009 July 02, 2013 July 01, 2014 RF Cable 8D STACAB-002 July 02, 2013 July 01, 2014 (COMMATE/PEWC) Software ADT_Radiated_ NA NA NA ADT V7.6.15.9.4 Antenna Tower & Turn Table TT100 ADT01 NA NA CT CORCOM AC Filter MRI2030 107/108 NA NA Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Open Site No. A. 3 The VCCI Site Registration No. is R-782. 4. The FCC Site Registration No. is 91097. 5 The CANADA Site Registration No. is IC 7450G-1. 6 Tested Date: Jan. 22, 2014 Report No.: FC131022E03 18 of 28 Report Format Version 5.0.2

For above 1GHz test DESCRIPTION & CALIBRATE CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER D DATE UNTIL Spectrum Analyzer N9038A MY51210202 Dec. 11, 2013 Dec. 10, 2014 Agilent E9038A MY50010132 Dec. 11, 2013 Dec. 10, 2014 Pre-Amplifier ZFL-1000VH2B AMP-ZFL-01 Nov. 13, 2013 Nov. 12, 2014 Mini-Circuits ZFL-1000VH2B AMP-ZFL-02 Nov. 13, 2013 Nov. 12, 2014 Trilog Broadband Antenna VULB 9168 9168-359 Mar. 22, 2013 Mar. 21, 2014 SCHWARZBECK VULB 9168 9168-358 Mar. 20, 2013 Mar. 19, 2014 CHFCAB-001 RF Cable 8DFB CHFCAB-002 Oct. 04, 2013 Oct. 03, 2014 CHFCAB-003 Pre-Amplifier 8449B 3008A01975 Mar. 02, 2013 Mar. 01, 2014 Agilent Horn Antenna BBHA 9120 9120D-783 Sep. 26, 2013 Sep. 25, 2014 SCHWARZBECK RF104-110 RF Cable NA RF104-206 Dec. 12, 2013 Dec.11, 2014 RF104-209 Spectrum Analyzer E4446A MY48250253 Aug. 28, 2013 Aug. 27, 2014 Agilent Pre-Amplifier SLKKa-48-6 9K16 Nov. 13, 2013 Nov. 12, 2014 SPACEK LABS Horn Antenna BBHA 9170 9170-424 Oct. 08, 2013 Oct. 07, 2014 SCHWARZBECK ADT_Radiated_ Software NA NA NA V8.7.07 Antenna Tower & Turn Table NA NA NA NA CT Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in 10m Chamber No. F. 3 The FCC Site Registration No. is 928149. 4. The VCCI Site Registration No. is R-3252 & G-136. 5 The CANADA Site Registration No. is IC 7450H-1. 6 Tested Date: Jan. 23, 2014 Report No.: FC131022E03 19 of 28 Report Format Version 5.0.2

4.2.3 TEST PROCEDURE For below 1GHz test: a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited test facility. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 10 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for quasi-peak detection (QP) at frequency below 1GHz. For above 1GHz test: a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at an accredited test facility. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna can be varied from one meter to four meters, the height of adjustment depends on the EUT height and the antenna 3dB beamwidth both, detect the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. NOTE: 1. The resolution bandwidth is 1MHz and video bandwidth of test receiver/spectrum analyzer is 3MHz for Peak detection at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: FC131022E03 20 of 28 Report Format Version 5.0.2

4.2.5 TEST SETUP <Frequency Range below 1GHz> Ant. Tower 1 - 4m Variable 10m EUT& Support Units 3m-above 1GHz Turn Table 80cm Ground Plane Test Receiver <Frequency Range above 1GHz> Turn Table Test Receiver * : depends on the EUT height and the antenna 3dB beamwidth both. For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.: FC131022E03 21 of 28 Report Format Version 5.0.2

4.2.7 TEST RESULTS TEST MODE Mode 1 FREQUENCY RANGE 30-1000 MHz DETECTOR Quasi-Peak, INPUT POWER DC 3.3V FUNCTION & BANDWIDTH 120kHz ENVIRONMENTAL 20 deg. C, 74 % RH TESTED BY Scott Chen CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 10 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 166.09 27.76 QP 30.00 -2.24 4.00 H 139 11.99 15.77 2 181.60 24.84 QP 30.00 -5.16 4.00 H 10 10.78 14.06 3 189.04 23.65 QP 30.00 -6.35 4.00 H 316 10.66 12.99 4 200.88 23.08 QP 30.00 -6.92 4.00 H 216 10.37 12.71 5 264.30 28.35 QP 37.00 -8.65 4.00 H 0 12.72 15.63 6 329.61 30.12 QP 37.00 -6.88 2.99 H 264 12.24 17.88 7 390.85 24.01 QP 37.00 -12.99 2.99 H 260 4.81 19.20 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: FC131022E03 22 of 28 Report Format Version 5.0.2

TEST MODE Mode 1 FREQUENCY RANGE 30-1000 MHz DETECTOR Quasi-Peak, INPUT POWER DC 3.3V FUNCTION & BANDWIDTH 120kHz ENVIRONMENTAL 20 deg. C, 74 % RH TESTED BY Scott Chen CONDITIONS ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 10 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 57.05 20.02 QP 30.00 -9.98 1.00 V 170 4.98 15.04 2 120.00 26.53 QP 30.00 -3.47 1.00 V 172 12.99 13.54 3 129.37 22.36 QP 30.00 -7.64 1.00 V 43 7.48 14.88 4 166.09 28.05 QP 30.00 -1.95 1.00 V 258 12.28 15.77 5 171.37 23.94 QP 30.00 -6.06 1.00 V 137 7.95 15.99 6 200.23 21.90 QP 30.00 -8.10 1.00 V 253 9.23 12.67 7 264.10 24.95 QP 37.00 -12.05 1.00 V 194 9.33 15.62 8 329.73 25.95 QP 37.00 -11.05 1.00 V 0 8.07 17.88 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: FC131022E03 23 of 28 Report Format Version 5.0.2

TEST MODE Mode 1 FREQUENCY RANGE 1000-12500 MHz DETECTOR Peak (PK) / INPUT POWER DC 3.3V FUNCTION & Average (AV), BANDWIDTH 1MHz ENVIRONMENTAL 21 deg. C, 64 % RH TESTED BY Eagle Chen CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 1595.00 40.60 PK 70.00 -29.40 1.00 H 282 44.18 -3.58 2 1595.00 25.08 AV 50.00 -24.92 1.00 H 282 28.66 -3.58 3 2044.00 39.83 PK 70.00 -30.17 1.00 H 337 41.29 -1.46 4 2044.00 25.01 AV 50.00 -24.99 1.00 H 337 26.47 -1.46 5 3222.50 45.32 PK 74.00 -28.68 1.00 H 185 42.93 2.39 6 3222.50 26.85 AV 54.00 -27.15 1.00 H 185 24.46 2.39 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: FC131022E03 24 of 28 Report Format Version 5.0.2

TEST MODE Mode 1 FREQUENCY RANGE 1000-12500 MHz DETECTOR Peak (PK) / INPUT POWER DC 3.3V FUNCTION & Average (AV), BANDWIDTH 1MHz ENVIRONMENTAL 21 deg. C, 64 % RH TESTED BY Eagle Chen CONDITIONS ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 1596.50 40.38 PK 70.00 -29.62 1.00 V 347 43.96 -3.58 2 1596.50 25.54 AV 50.00 -24.46 1.00 V 347 29.12 -3.58 3 2102.75 45.04 PK 70.00 -24.96 1.00 V 169 46.25 -1.21 4 2102.75 25.30 AV 50.00 -24.70 1.00 V 169 26.51 -1.21 5 2638.00 40.58 PK 70.00 -29.42 1.00 V 192 39.54 1.04 6 2638.00 26.23 AV 50.00 -23.77 1.00 V 192 25.19 1.04 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: FC131022E03 25 of 28 Report Format Version 5.0.2

5 PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: FC131022E03 26 of 28 Report Format Version 5.0.2

6 INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26052943 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. Report No.: FC131022E03 27 of 28 Report Format Version 5.0.2

7 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test. --- END --- Report No.: FC131022E03 28 of 28 Report Format Version 5.0.2


Document Created: 2019-09-12 13:36:49
Document Modified: 2019-09-12 13:36:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC