MPE Report for Mobile

FCC ID: PPD-QCASP141

RF Exposure Info

Download: PDF
FCCID_2185178

RF EXPOSURE REPORT REPORT NO.: SA131022E03 MODEL NO.: QCASP141 FCC ID: PPD-QCASP141 IC: 4104A-QCASP141 RECEIVED: Oct. 22, 2013 TESTED: Dec. 02, 2013 ISSUED: Jan. 09, 2014 APPLICANT: Qualcomm Atheros, Inc. ADDRESS: 1700 Technology Drive, San Jose, CA 95110 Bureau Veritas Consumer Products Services (H.K.) ISSUED BY: Ltd., Taoyuan Branch Hsin Chu Laboratory No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, LAB ADDRESS : Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA131022E03 1 of 6 Report Format Version 5.0.0

TABLE OF CONTENTS RELEASE CONTROL RECORD .................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT.............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN....................................................................................................... 5 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 6 Report No.: SA131022E03 2 of 6 Report Format Version 5.0.0

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA131022E03 Original release Jan. 09, 2014 Report No.: SA131022E03 3 of 6 Report Format Version 5.0.0

1. CERTIFICATION PRODUCT: 1x1 802.11b/g/n module BRAND NAME: Qualcomm Atheros MODEL NO.: QCASP141 TEST SAMPLE: R&D SAMPLE APPLICANT: Qualcomm Atheros, Inc. STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: QCASP141) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Jan. 09, 2014 ( Phoenix Huang, Specialist ) APPROVED BY : , DATE: Jan. 09, 2014 ( May Chen, Manager ) Report No.: SA131022E03 4 of 6 Report Format Version 5.0.0

2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY ELECTRIC FIELD MAGNETIC FIELD POWER DENSITY AVERAGE TIME RANGE (MHz) STRENGTH (V/m) STRENGTH (A/m) (mW/cm2) (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 5. ANTENNA GAIN The declared antenna gain is 3.62dBi. this antenna gain was used for conducted spurious/bandedge calculations. Report No.: SA131022E03 5 of 6 Report Format Version 5.0.0

6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER 802.11b FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/cm2) 2412-2462 188.365 3.62 20 0.08624 1.00 802.11g FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/cm2) 2412-2462 456.037 3.62 20 0.20880 1.00 802.11n (HT20) FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/cm2) 2412-2462 448.745 3.62 20 0.20546 1.00 802.11n (HT40) FREQUENCY ANTENNA POWER MAX POWER DISTANCE LIMIT BAND GAIN DENSITY (mW) (cm) (mW/cm2) (MHz) (dBi) (mW/cm2) 2422-2452 153.109 3.62 20 0.07010 1.00 --- END --- CONCLUSION: Both of the WLAN and Bluetooth can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.21630 / 1 + 0.00275 / 1= 0.219, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit. Report No.: SA131022E03 6 of 6 Report Format Version 5.0.0


Document Created: 2019-09-25 07:59:35
Document Modified: 2019-09-25 07:59:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC