SAR Plots 2.4G

FCC ID: PPD-AR5BHB116

RF Exposure Info

Download: PDF
FCCID_1479818

Report No. M110362_FCC_AR5BHB116_SAR_2.4 Page 30 of 68 APPENDIX B PLOTS OF THE SAR MEASUREMENTS Plots of the measured SAR distributions inside the phantom are given in this Appendix for all tested configurations. Table 22: 2450 MHz DSSS Band SAR Measurement Plot Numbers Bit rate Channel Test Test Plot Ant Mode Bandwidth Channel Position No. (Mbps) (MHz) Bystander 25mm 1 A 1 - 06 Spacing 2 B 1 - 06 3 A 1 - 06 Lap Held 4 B 1 - 06 Primary Portrait 5 A 1 - 06 - A 1 - 06 Secondary Landscape 6 B 1 - 06 7 B 1 - 01 Secondary Portrait 8 B 1 - 06 9 B 1 - 11 Table 23: 2450MHz System verification Plot th Plot 10 System verification 2450 MHz 19 April 2011 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No. M110362_FCC_AR5BHB116_SAR_2.4 Page 31 of 68 Test Date: 19 April 2011 File Name: M110362 Bystander 25mm Spacing DSSS 2.4 GHz Ant A 19-04-11.da52:0 DUT: Fujitsu Tablet Claw with HB116 11abgn; Type: AR5BHB116; Serial: MAC: 4CEDDE2CE17D * Communication System: DSSS 2450 MHz 1Mbs; Frequency: 2437 MHz; Duty Cycle: 1:1.53886 3 * Medium parameters used: f = 2436 MHz; σ = 1.888 mho/m; εr = 52.896; ρ = 1000 kg/m - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 6 Test/Area Scan (71x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.051 mW/g Configuration/Channel 6 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.748 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 0.101 W/kg SAR(1 g) = 0.047 mW/g; SAR(10 g) = 0.027 mW/g Maximum value of SAR (measured) = 0.051 mW/g 0 dB = 0.050mW/g SAR MEASUREMENT PLOT 1 Ambient Temperature 21.0 Degrees Celsius Liquid Temperature 20.8 Degrees Celsius Humidity 40.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Interpolated Max SAR Z Line(2) mm m Channel 6 TestZoom Scan:SAR;cube 0 Markers 0.10 0.09 \ sor.—\ 0.08 oe _\ maig 0.04 0.0% 0.02 0.01 0.00 0.000 0.005 0.010 0.015 0.020 0.026 0.030 0.035

Report No. M110362_FCC_AR5BHB116_SAR_2.4 Page 33 of 68 Test Date: 19 April 2011 File Name: M110362 Bystander 25mm spacing DSSS 2.4 GHz Ant B 19-04-11.da52:0 DUT: Fujitsu Tablet Claw with HB116 11abgn; Type: AR5BHB116; Serial: MAC: 4CEDDE2CE17D * Communication System: DSSS 2450 MHz 1Mbs; Frequency: 2437 MHz; Duty Cycle: 1:1.53886 3 * Medium parameters used: f = 2436 MHz; σ = 1.888 mho/m; εr = 52.896; ρ = 1000 kg/m - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 6 Test/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.034 mW/g Configuration/Channel 6 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.124 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 0.062 W/kg SAR(1 g) = 0.032 mW/g; SAR(10 g) = 0.019 mW/g Maximum value of SAR (measured) = 0.033 mW/g 0 dB = 0.030mW/g SAR MEASUREMENT PLOT 2 Ambient Temperature 21.0 Degrees Celsius Liquid Temperature 20.8 Degrees Celsius Humidity 40.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Interpolated Max SAR Z Line(2) mm m Channel 6 TestZoom Sean:SAR;cube 0 Markers 0.050 0.055 0.050 0.045 0.040 EI]D‘.E EI]D‘II 0.025 0.020 0.015 0.010 ©.006 ©.000 9.000 0.005 0.010 0.015 0.020 0.026 0.030 0.035 V «C m C t t

Report No. M110362_FCC_AR5BHB116_SAR_2.4 Page 35 of 68 Test Date: 19 April 2011 File Name: M110362 Lap Held DSSS 2.4 GHz Ant A 19-04-11.da52:0 DUT: Fujitsu Tablet Claw with HB116 11abgn; Type: AR5BHB116; Serial: MAC: 4CEDDE2CE17D * Communication System: DSSS 2450 MHz 1Mbs; Frequency: 2437 MHz; Duty Cycle: 1:1.53886 3 * Medium parameters used: f = 2436 MHz; σ = 1.888 mho/m; εr = 52.896; ρ = 1000 kg/m - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 6 Test/Area Scan (71x121x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.088 mW/g Configuration/Channel 6 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.322 V/m; Power Drift = 0.32 dB Peak SAR (extrapolated) = 0.161 W/kg SAR(1 g) = 0.084 mW/g; SAR(10 g) = 0.049 mW/g Maximum value of SAR (measured) = 0.091 mW/g 0 dB = 0.090mW/g SAR MEASUREMENT PLOT 3 Ambient Temperature 21.0 Degrees Celsius Liquid Temperature 20.8 Degrees Celsius Humidity 40.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Interpolated Max SAR Z Line(2) Channel 6 TestZoom Scan:SAR;cube 0 0.16 0.14 \ anl—\ 0.12 maig o & 0.06 0.0¢ 0.02 0.00 0.000 0.005 0.010 0.015 0.020 0.026

Report No. M110362_FCC_AR5BHB116_SAR_2.4 Page 37 of 68 Test Date: 19 April 2011 File Name: M110362 Lap Held DSSS 2.4 GHz Ant B 19-04-11.da52:0 DUT: Fujitsu Tablet Claw with HB116 11abgn; Type: AR5BHB116; Serial: MAC: 4CEDDE2CE17D * Communication System: DSSS 2450 MHz 1Mbs; Frequency: 2437 MHz; Duty Cycle: 1:1.53886 3 * Medium parameters used: f = 2436 MHz; σ = 1.888 mho/m; εr = 52.896; ρ = 1000 kg/m - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 6 Test/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.012 mW/g Configuration/Channel 6 Test/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.590 V/m; Power Drift = 0.39 dB Peak SAR (extrapolated) = 0.029 W/kg SAR(1 g) = 0.014 mW/g; SAR(10 g) = 0.00703 mW/g Maximum value of SAR (measured) = 0.015 mW/g 0 dB = 0.020mW/g SAR MEASUREMENT PLOT 4 Ambient Temperature 21.0 Degrees Celsius Liquid Temperature 20.8 Degrees Celsius Humidity 40.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Interpolated Max SAR Z Line(2) mm m Channel 6 TestZoom Sean:SAR;cube 0 Markers 0.030 0.025 0.020 maig 0.015 2010 \ \-._ 0.006 ©.000 9.000 0.005 0.010 0.015 0.020 0.026 0.030 0.035

Report No. M110362_FCC_AR5BHB116_SAR_2.4 Page 39 of 68 Test Date: 19 April 2011 File Name: M110362 Primary Portrait DSSS 2.4 GHz Ant A 19-04-11.da52:0 DUT: Fujitsu Tablet Claw with HB116 11abgn; Type: AR5BHB116; Serial: MAC: 4CEDDE2CE17D * Communication System: DSSS 2450 MHz 1Mbs; Frequency: 2437 MHz; Duty Cycle: 1:1.53886 3 * Medium parameters used: f = 2436 MHz; σ = 1.888 mho/m; εr = 52.896; ρ = 1000 kg/m - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 6 Test/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.294 mW/g Configuration/Channel 6 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.151 V/m; Power Drift = -0.20 dB Peak SAR (extrapolated) = 0.632 W/kg SAR(1 g) = 0.241 mW/g; SAR(10 g) = 0.112 mW/g Maximum value of SAR (measured) = 0.269 mW/g 0 dB = 0.270mW/g SAR MEASUREMENT PLOT 5 Ambient Temperature 21.0 Degrees Celsius Liquid Temperature 20.8 Degrees Celsius Humidity 40.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Interpolated Max SAR Z Line(z) Channel 6 TestZoom Scan:SAR;cube 0 0.65 0.60 055 0.50 0.45 0.40 20.3 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0. 000 0.005 0.010 0.015 0.020 0.026 0.030 0.035 V

Report No. M110362_FCC_AR5BHB116_SAR_2.4 Page 41 of 68 Test Date: 19 April 2011 File Name: M110362 Secondary Landscape DSSS 2.4 GHz Ant B 19-04-11.da52:0 DUT: Fujitsu Tablet Claw with HB116 11abgn; Type: AR5BHB116; Serial: MAC: 4CEDDE2CE17D * Communication System: DSSS 2450 MHz 1Mbs; Frequency: 2437 MHz; Duty Cycle: 1:1.53886 3 * Medium parameters used: f = 2436 MHz; σ = 1.888 mho/m; εr = 52.896; ρ = 1000 kg/m - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 6 Test/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.082 mW/g Configuration/Channel 6 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.346 V/m; Power Drift = 0.36 dB Peak SAR (extrapolated) = 0.174 W/kg SAR(1 g) = 0.072 mW/g; SAR(10 g) = 0.032 mW/g Maximum value of SAR (measured) = 0.083 mW/g 0 dB = 0.080mW/g SAR MEASUREMENT PLOT 6 Ambient Temperature 21.0 Degrees Celsius Liquid Temperature 20.8 Degrees Celsius Humidity 40.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Interpolated Max SAR Z Line(2) mm m Channel 6 TestZoom Scan:SAR;cube 0 Markers 0.18 0.16 0.14 \ 042 E[I.1l] 0.08 0.06 0.0¢ 0.02 \_-_‘_ 0.00 0.000 0.005 0.010 0.015 0.020 0.026 0.030 0.035

Report No. M110362_FCC_AR5BHB116_SAR_2.4 Page 43 of 68 Test Date: 19 April 2011 File Name: M110362 Secondary Portrait DSSS 2.4 GHz Ant B 19-04-11.da52:0 DUT: Fujitsu Tablet Claw with HB116 11abgn; Type: AR5BHB116; Serial: MAC: 4CEDDE2CE17D * Communication System: DSSS 2450 MHz 1Mbs; Frequency: 2412 MHz; Duty Cycle: 1:1.53886 3 * Medium parameters used: f = 2412 MHz; σ = 1.852 mho/m; εr = 53.043; ρ = 1000 kg/m - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 1 Test/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.590 mW/g Configuration/Channel 1 Test/Zoom Scan (7x9x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.953 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 1.350 W/kg SAR(1 g) = 0.512 mW/g; SAR(10 g) = 0.244 mW/g Maximum value of SAR (measured) = 0.561 mW/g 0 dB = 0.560mW/g SAR MEASUREMENT PLOT 7 Ambient Temperature 21.0 Degrees Celsius Liquid Temperature 20.8 Degrees Celsius Humidity 40.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Interpolated Max SAR Z Line(2) mm Cl Channel 1 TestZoom Scan:SAR;cube 0 Markers al\ al_—\ maig o4 0.2 t——__| 0o 9.000 0.006 0.010 0.015 0.020 0.025 0.030 0.035

Report No. M110362_FCC_AR5BHB116_SAR_2.4 Page 45 of 68 Test Date: 19 April 2011 File Name: M110362 Secondary Portrait DSSS 2.4 GHz Ant B 19-04-11.da52:0 DUT: Fujitsu Tablet Claw with HB116 11abgn; Type: AR5BHB116; Serial: MAC: 4CEDDE2CE17D * Communication System: DSSS 2450 MHz 1Mbs; Frequency: 2437 MHz; Duty Cycle: 1:1.53886 3 * Medium parameters used: f = 2436 MHz; σ = 1.888 mho/m; εr = 52.896; ρ = 1000 kg/m - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 6 Test/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.872 mW/g Configuration/Channel 6 Test/Zoom Scan (7x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.000 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 1.902 W/kg SAR(1 g) = 0.733 mW/g; SAR(10 g) = 0.350 mW/g Maximum value of SAR (measured) = 0.793 mW/g 0 dB = 0.790mW/g SAR MEASUREMENT PLOT 8 Ambient Temperature 21.0 Degrees Celsius Liquid Temperature 20.8 Degrees Celsius Humidity 40.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Interpolated Max SAR Z Line(2) mm Cl Channel 6 Test:Zoom Scan:SAR;cube 0 Markers maig as|_—\ s e 06 02 t—__| 0o 9.000 0.006 0.010 0.015 0.020 0.025 0.030 0.035

Report No. M110362_FCC_AR5BHB116_SAR_2.4 Page 47 of 68 Test Date: 19 April 2011 File Name: M110362 Secondary Portrait DSSS 2.4 GHz Ant B 19-04-11.da52:0 DUT: Fujitsu Tablet Claw with HB116 11abgn; Type: AR5BHB116; Serial: MAC: 4CEDDE2CE17D * Communication System: DSSS 2450 MHz 1Mbs; Frequency: 2462 MHz; Duty Cycle: 1:1.53886 3 * Medium parameters used: f = 2462 MHz; σ = 1.923 mho/m; εr = 52.707; ρ = 1000 kg/m - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 11 Test/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.033 mW/g Configuration/Channel 11 Test/Zoom Scan (7x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.086 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 2.149 W/kg SAR(1 g) = 0.805 mW/g; SAR(10 g) = 0.391 mW/g Maximum value of SAR (measured) = 0.870 mW/g 0 dB = 0.870mW/g SAR MEASUREMENT PLOT 9 Ambient Temperature 21.0 Degrees Celsius Liquid Temperature 20.8 Degrees Celsius Humidity 40.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Interpolated Max SAR Z Line(2) mm Cl Channel 11 TestZoom Sean:SAR:cube 0 Markers 0o 9.000 0.006 0.010 0.015 0.020 0.025 0.030 0.035 A n en ne en en e nomece en ce es e NATA NCP 20 e s .

Report No. M110362_FCC_AR5BHB116_SAR_2.4 Page 49 of 68 Test Date: 19 April 2011 File Name: System Check 2450 MHz 19-04-11.da52:0 DUT: Dipole 2450 MHz; Type: DV2450V2; Serial: 724 * Communication System: CW; Frequency: 2450 MHz; Duty Cycle: 1:1 3 * Medium parameters used: f = 2450 MHz; σ = 1.906 mho/m; εr = 52.796; ρ = 1000 kg/m - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(4.09, 4.09, 4.09) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 1 Test/Area Scan (51x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 16.706 mW/g Configuration/Channel 1 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 91.037 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 32.972 W/kg SAR(1 g) = 14.8 mW/g; SAR(10 g) = 6.98 mW/g Maximum value of SAR (measured) = 16.325 mW/g 0 dB = 16.320mW/g SAR MEASUREMENT PLOT 10 Ambient Temperature 21.0 Degrees Celsius Liquid Temperature 20.8 Degrees Celsius Humidity 40.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Interpolated Max SAR Z Line(z) Tall Channel 1 TestZoom Scan;SAR:cube 0 Markers 9.000 0.005 0.010 0.015 0.020 0.025 0.030 0.035


Document Created: 2011-05-27 16:21:03
Document Modified: 2011-05-27 16:21:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC