Test Report

FCC ID: PPD-AR5BDT92

Test Report

Download: PDF
FCCID_1089391

FCC DoC TEST REPORT REPORT NO. : FD980302H02 MODEL NO. : AR5BDT92 RECEIVED : Mar. 04, 2009 TESTED : Mar. 16, 2009 ISSUED DATE: Mar. 19, 2009 APPLICANT : Atheros Communications, Inc. ADDRESS : 5480 Great America Parkway, Santa Clara, CA 95054 ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan. This test report consists of 22 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF, NVLAP or any government agencies. Report No.: FD980302H02 1 Report Format Version 3.0.0

Table of Contents 1 CERTIFICATION ............................................................................................. 3 2 SUMMARY OF TEST RESULTS..................................................................... 4 2.1 MEASUREMENT UNCERTAINTY .................................................................. 4 3 GENERAL INFORMATION ............................................................................. 5 3.1 GENERAL DESCRIPTION OF EUT................................................................ 5 3.2 GENERAL DESCRIPTION OF TEST MODE .................................................. 6 3.3 DESCRIPTION OF SUPPORT UNITS............................................................ 7 3.4 CONFIGURATION OF SYSTEM UNDER TEST ............................................. 7 4 EMISSION TEST............................................................................................. 8 4.1 CONDUCTED EMISSION MEASUREMENT .................................................. 8 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT................................ 8 4.1.2 TEST INSTRUMENTS .................................................................................... 8 4.1.3 TEST PROCEDURE ....................................................................................... 9 4.1.4 DEVIATION FROM TEST STANDARD ........................................................... 9 4.1.5 TEST SETUP ................................................................................................ 10 4.1.6 EUT OPERATING CONDITIONS.................................................................. 10 4.1.7 TEST RESULTS.............................................................................................11 4.2 RADIATED EMISSION MEASUREMENT ..................................................... 13 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................... 13 4.2.2 TEST INSTRUMENTS .................................................................................. 14 4.2.3 TEST PROCEDURE ..................................................................................... 15 4.2.4 DEVIATION FROM TEST STANDARD ......................................................... 15 4.2.5 TEST SETUP ................................................................................................ 16 4.2.6 EUT OPERATING CONDITIONS.................................................................. 16 4.2.7 TEST RESULTS............................................................................................ 17 5 INFORMATION ON THE TESTING LABORATORIES .................................. 21 6 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ......................................................... 22 Report No.: FD980302H02 2 Report Format Version 3.0.0

1 CERTIFICATION PRODUCT : 802.11n 2x2 Minicard BRAND NAME : Atheros MODEL NO. : AR5BDT92 TESTED : Mar. 16, 2009 TEST SAMPLE : R&D SAMPLE APPLICANT : Atheros Communications, Inc. STANDARDS : FCC Part 15, Subpart B, Class B ANSI C63.4-2003 The above equipment (Model: AR5BDT92) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and was in compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Mar. 19, 2009 ( Midoli Peng, Specialist ) TECHNICAL ACCEPTANCE : , DATE: Mar. 19, 2009 Responsible for RF ( Hank Chung, Deputy Manager ) APPROVED BY : , DATE: Mar. 19, 2009 (May Chen, Deputy Manager ) Report No.: FD980302H02 3 Report Format Version 3.0.0

2 SUMMARY OF TEST RESULTS Standard Test Type Result Remarks Meets Class B Limit Conducted Test PASS Minimum passing margin is -8.96 dB at 0.194 MHz FCC Part 15 Subpart B, Class B Meets Class B Limit Radiated Test PASS Minimum passing margin is -0.72 dB at 199.82 MHz 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Value Conducted emissions 2.44 dB Radiated emissions (30MHz-1GHz) 3.94 dB Radiated emissions (1GHz -18GHz) 2.49 dB Radiated emissions (18GHz -40GHz) 2.70 dB Report No.: FD980302H02 4 Report Format Version 3.0.0

3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT 802.11n 2x2 Minicard MODEL NO. AR5BDT92 POWER SUPPLY DC 3.3V from host equipment POWER CORD NA DATA CABLE NA SUPPLIED I/O PORT NA NOTE: 1. There are two antennas provided to this EUT, please refer to the following table: Antenna Antenna Transmitter Antenna Antenna Brand Model Gain (dBi) Gain (dBi) Circuit Type Connector For 2.4GHz For 5GHz Chain(0) Tyco 1513327-1 Dipole 3 4 RPSMA Chain(1) Tyco 1513327-1 Dipole 3 4 RPSMA 2. The EUT incorporates a MIMO function with 802.11a, 802.11b, 802.11g, draft 802.11n. 3. The EUT is 2 * 2 spatial MIMO (2Tx & 2Rx) without beam forming function. The antenna configurations are two transmitter antennas and two receiver antennas, as there are 2 Dipole antennas. Spatial multiplexing modes for simultaneous transmission using 2 antennas, and for simultaneous receiver using 2 antennas. T 4. When the EUT operating in draft 802.11n, the software operation, which is defined by manufacturer, MCS (Modulation and Coding Schemes) from 0 to 15. 5. The EUT complies with draft 802.11n standards and backwards compatible with 802. 11a, 802.11b, 802.11g products. 6. The EUT was pre-tested under the following versions: Test Version Description Version A With RPSMA connector Version B Without RPSMA connector From the above Versions, the worst case was found in Version B. Therefore only the test data of the version was recorded in this report. (Both with RPSMA and without RPSMA connector boards were evaluated on conducted emissions and radiated emission (antenna gain was used in section 3.1(1)) test to find the worst case.) 7. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: FD980302H02 5 Report Format Version 3.0.0

3.2 GENERAL DESCRIPTION OF TEST MODE The EUT was tested under following test mode: Test Version Description Version 1 Without RPSMA connector Report No.: FD980302H02 6 Report Format Version 3.0.0

3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID NOTEBOOK 1 Lenovo 0769 L3-BE248 08/01 FCC DoC COMPUTER EXTENSION 2 Atheros NA NA NA CARD NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 NA 2 NA NOTE: All power cords of the above support units are non shielded (1.8m). 3.4 CONFIGURATION OF SYSTEM UNDER TEST 1. NOTEBOOK 2. EXTENSION EUT COMPUTER CARD TEST TABLE Report No.: FD980302H02 7 Report Format Version 3.0.0

4 EMISSION TEST 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15, Subpart B (Section: 15.107) FREQUENCY Class A (dBuV) Class B (dBuV) (MHz) Quasi-peak Average Quasi-peak Average 0.15 - 0.5 79 66 66 - 56 56 - 46 0.50 - 5.0 73 60 56 46 5.0 - 30.0 73 60 60 50 NOTE: (1) The lower limit shall apply at the transition frequencies. (2) The limit decreases linearly with the logarithm of the frequency in the range 0.15 to 0.50 MHz (3) All emanation from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.1.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 100375 April 01, 2008 Mar. 31, 2009 Line-Impedance Stabilization Network ENV-216 100071 Nov. 26, 2008 Nov. 25, 2009 (for EUT) Line-Impedance Stabilization Network ESH3-Z5 848773/004 Nov. 05, 2008 Nov. 04, 2009 (for Peripheral) RF Cable (JYEBAO) 5DFB COBCAB-001 Aug 15, 2008 Aug 14, 2009 50 ohms Terminator 50 3 Nov. 05, 2008 Nov. 04, 2009 BV Software NA NA NA ADT_Cond_V7.3.7 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. B. 3 The VCCI Con B Registration No. is C-2193. Report No.: FD980302H02 8 Report Format Version 3.0.0

4.1.3 TEST PROCEDURE The basic test procedure was in accordance with ANSI C63.4-2003 (section 7). a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150 kHz to 30 MHz was searched. Emission levels over 10dB under the prescribed limits could not be reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation Report No.: FD980302H02 9 Report Format Version 3.0.0

4.1.5 TEST SETUP Ve r tic a l R e f e r e n c e G r o u n d P la n e T e s t R e c e iv e r EUT 40cm 80cm L IS N H o r iz o n ta l R e fe r e n c e G r o u n d P la n e N o te : 1 .S u p p o r t u n its w e r e c o n n e c te d to s e c o n d L IS N . 2 .B o th o f L IS N s ( A M N ) a r e 8 0 c m fr o m E U T a n d a t le a s t 8 0 fr o m o th e r u n its a n d o th e r m e ta l p la n e s For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.1.6 EUT OPERATING CONDITIONS a. Connect the EUT with support unit 1 (Notebook computer) which placed on a testing table. b. Support unit 1 (Notebook computer) run test program “ART V0 9 b4” to allow EUT to transmit continuously at specific channel frequency. 1. Support unit 3 communicated to each other via EUT by wireless. Report No.: FD980302H02 10 Report Format Version 3.0.0

4.1.7 TEST RESULTS INPUT POWER 120Vac, 60 Hz 6DB BANDWIDTH 9 kHz ENVIRONMENTAL 22 deg. C, 67%RH, PHASE Line (L) CONDITIONS 965 hPa TESTED BY Phoenix Huang Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.150 0.19 52.48 - 52.67 - 66.00 56.00 -13.33 - 2 0.194 0.22 54.67 39.93 54.89 40.15 63.85 53.85 -8.96 -13.70 3 0.259 0.29 45.29 - 45.58 - 61.45 51.45 -15.87 - 4 0.341 0.39 39.56 - 39.95 - 59.17 49.17 -19.22 - 5 4.934 0.60 31.72 - 32.32 - 56.00 46.00 -23.68 - 6 14.055 1.02 32.86 - 33.88 - 60.00 50.00 -26.12 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD980302H02 11 Report Format Version 3.0.0

INPUT POWER 120Vac, 60 Hz 6dB BANDWIDTH 9 kHz ENVIRONMENTAL 22 deg. C, 67%RH, PHASE Neutral (N) CONDITIONS 965 hPa TESTED BY Phoenix Huang Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.150 0.12 50.44 - 50.56 - 66.00 56.00 -15.44 - 2 0.193 0.15 54.31 38.53 54.46 38.68 63.91 53.91 -9.45 -15.23 3 0.252 0.21 43.14 - 43.35 - 61.71 51.71 -18.35 - 4 0.334 0.32 37.94 - 38.26 - 59.36 49.36 -21.10 - 5 4.609 0.52 32.73 - 33.25 - 56.00 46.00 -22.75 - 6 13.570 0.79 34.65 - 35.44 - 60.00 50.00 -24.56 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD980302H02 12 Report Format Version 3.0.0

4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15, Subpart B (Section: 15.109) FOR FREQUENCY BELOW 1000 MHz (47 CFR Part 15 Subpart B) FREQUENCY Class A (at 10m) Class B (at 3m) (MHz) uV/m dBuV/m uV/m dBuV/m 30 – 88 90 39.1 100 40.0 88 – 216 150 43.5 150 43.5 216 - 960 210 46.4 200 46.0 Above 960 300 49.5 500 54.0 LIMIT OF RADIATED EMISSION OF FCC PART 15, SUBPART B FOR FREQUENCY ABOVE 1000 MHz Class A (dBuV/m) (at 3m) Class B (dBuV/m) (at 3m) FREQUENCY (MHz) PEAK AVERAGE PEAK AVERAGE Above 1000 80.0 60.0 74.0 54.0 Note: (1) The lower limit shall apply at the transition frequencies. (2) Emission level (dBuV/m) = 20 log Emission level (uV/m). (3) All emanation from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. Report No.: FD980302H02 13 Report Format Version 3.0.0

FREQUENCY RANGE OF RADIATED MEASUREMENT (For unintentional radiators) Highest frequency generated or Upper frequency of measurement Range (MHz) used in the device or on which the device operates or tunes (MHz) Below 1.705 30 1.705 – 108 1000 108 – 500 2000 500 – 1000 5000 th 5 harmonic of the highest frequency Above 1000 or 40 GHz, whichever is lower 4.2.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL ROHDE & SCHWARZ FSP40 100036 Dec. 09, 2008 Dec.0 8, 2009 Spectrum Analyzer HP Pre_Amplifier 8449B 3008A01923 Nov. 10, 2008 Nov. 09, 2009 ROHDE & SCHWARZ ESCS30 847124/029 Sep. 09, 2008 Sep. 08, 2009 Test Receiver SCHWARZBECK TRILOG Broadband VULB 9168 138 April 30, 2008 April 29, 2009 Antenna Schwarzbeck BBHA9120 D124 Dec. 09, 2008 Dec. 08, 2009 Horn_Antenna Schwarzbeck BBHA 9170 BBHA9170153 Jan. 22, 2009 Jan. 21, 2010 Horn_Antenna RF Switches EMH-011 08009 Oct. 07, 2008 Oct. 06, 2009 RF CABLE (Chaintek) Sucoflex 106 28077 Aug. 15, 2008 Aug. 14, 2009 STCCAB-30M- RF Cable 8DFB Oct. 07, 2008 Oct. 06, 2009 1GHz ADT_Radiated_ Software NA NA NA V7.6.15.9.2 CT Antenna Tower & NA NA NA NA Turn Table Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, HP preamplifier (model: 8449B) and Spectrum Analyzer (model: FSP40) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Open Site No. C. 4. The FCC Site Registration No. is 656396. 5. The VCCI Site Registration No. is R-1626. 6. The CANADA Site Registration No. is IC 7450G-3. Report No.: FD980302H02 14 Report Format Version 3.0.0

4.2.3 TEST PROCEDURE The basic test procedure was in accordance with ANSI C63.4-2003 (section 8). a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 10-meter open field site. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the turn table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth is 1MHz and video bandwidth of test receiver/spectrum analyzer is 3MHz for Peak detection at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz. 3. For measurement of frequency above 1000 MHz, the EUT was set 3 meters away from the interference antenna. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: FD980302H02 15 Report Format Version 3.0.0

4.2.5 TEST SETUP Ant. Tower 1-4m Variable 3m EUT& Support Units 3m-above 1GHz Turn Table 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.: FD980302H02 16 Report Format Version 3.0.0

4.2.7 TEST RESULTS TEST MODE Mode 1 INPUT POWER 120Vac, 60 Hz DETECTOR Quasi-Peak, FREQUENCY RANGE 30-1000 MHz FUNCTION & BANDWIDTH 120kHz ENVIRONMENTAL 22 deg. C, 64 % RH, TESTED BY Phoenix Huang CONDITIONS 960 hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 157.50 38.87 QP 43.50 -4.63 1.67 H 244 22.75 16.12 2 166.48 41.52 QP 43.50 -1.98 1.57 H 74 26.11 15.41 3 199.82 42.78 QP 43.50 -0.72 1.71 H 90 29.79 12.99 4 299.75 44.13 QP 46.00 -1.87 1.00 H 99 27.12 17.01 5 399.67 42.65 QP 46.00 -3.35 2.13 H 153 21.52 21.13 6 499.60 39.04 QP 46.00 -6.96 1.59 H 138 16.39 22.65 7 719.77 34.44 QP 46.00 -11.56 1.00 H 311 6.84 27.60 8 899.41 36.13 QP 46.00 -9.87 1.00 H 258 5.13 31.00 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD980302H02 17 Report Format Version 3.0.0

TEST MODE Mode 1 INPUT POWER 120Vac, 60 Hz DETECTOR Quasi-Peak, FREQUENCY RANGE 30-1000 MHz FUNCTION & BANDWIDTH 120kHz ENVIRONMENTAL 22 deg. C, 64 % RH, TESTED BY Phoenix Huang CONDITIONS 960 hPa ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 33.34 36.03 QP 40.00 -3.97 1.00 V 20 22.42 13.61 2 133.53 34.98 QP 43.50 -8.52 1.00 V 0 20.37 14.61 3 199.81 33.95 QP 43.50 -9.55 1.53 V 190 20.96 12.99 4 299.75 32.61 QP 46.00 -13.39 1.54 V 316 15.60 17.01 5 399.65 40.07 QP 46.00 -5.93 2.00 V 184 18.94 21.13 6 675.25 31.04 QP 46.00 -14.96 1.58 V 347 4.56 26.48 7 899.41 33.89 QP 46.00 -12.11 1.52 V 211 2.89 31.00 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD980302H02 18 Report Format Version 3.0.0

TEST MODE Mode 1 INPUT POWER 120Vac, 60 Hz DETECTOR Peak (PK) / FREQUENCY RANGE 1000-29500 MHz FUNCTION & Average (AV), BANDWIDTH 1MHz ENVIRONMENTAL 13 deg. C, 70 % RH, TESTED BY Moris Lin CONDITIONS 960 hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 3883.33 49.74 PK 74.00 -24.26 1.26 H 228 16.43 33.31 2 3883.33 38.12 AV 54.00 -15.88 1.26 H 228 4.81 33.31 3 7766.67 49.85 PK 74.00 -24.15 1.08 H 274 6.93 42.92 4 7766.67 39.74 AV 54.00 -14.26 1.08 H 274 -3.18 42.92 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD980302H02 19 Report Format Version 3.0.0

TEST MODE Mode 1 INPUT POWER 120Vac, 60 Hz DETECTOR Peak (PK) / FREQUENCY RANGE 1000-29500 MHz FUNCTION & Average (AV), BANDWIDTH 1MHz ENVIRONMENTAL 13 deg. C, 70 % RH, TESTED BY Moris Lin CONDITIONS 960 hPa ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 3883.33 50.17 PK 74.00 -23.83 1.45 V 229 16.86 33.31 2 3883.33 38.67 AV 54.00 -15.33 1.45 V 229 5.36 33.31 3 7766.67 50.14 PK 74.00 -23.86 1.19 V 203 7.22 42.92 4 7766.67 40.14 AV 54.00 -13.86 1.19 V 203 -2.78 42.92 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD980302H02 20 Report Format Version 3.0.0

5 INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved by the following approval agencies according to ISO/IEC 17025: USA FCC, NVLAP Germany TUV Rheinland Japan VCCI Norway NEMKO Canada INDUSTRY CANADA , CSA R.O.C. TAF, BSMI, NCC Netherlands Telefication Singapore GOST-ASIA(MOU) Russia CERTIS(MOU) Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5/phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26052943 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Email: service@adt.com.tw Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. Report No.: FD980302H02 21 Report Format Version 3.0.0

6 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. --- END --- Report No.: FD980302H02 22 Report Format Version 3.0.0


Document Created: 2009-04-01 18:03:38
Document Modified: 2009-04-01 18:03:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC