Request for modular approval

FCC ID: PPD-AR5BBU22

Cover Letter(s)

Download: PDF

FCCID_1473370

FCC ID: PPD-AR5BBU22

Modular Approval Request Letter
Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
May 13, 2011

Dear Application Examiner,

Atheros Communications, Inc., It’s a Bluetooth USB module, FCC ID:
PPD-AR5BBU22 would like to have your authorization as a modular approval.

The requirements of section 15.212 of FCC rules have been met and shown on the
following statements.

1. “The modular transmitter must have its own RF shielding.”: The radio portion of
this module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT
has buffered data input, it is integrated in chip AR3012.

3. “The modular transmitter must have its own power supply regulation part no.:
AR3012.

4. “The modular transmitter must comply with the antenna requirements of section
15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The
spurious emission, unique antenna connector and photo of antennas are shown
in the test report.

5. “The modular transmitter must be tested in a stand-alone configuration”. The
EUT is tested in a stand-alone configuration via an USB to USB extender..
Please see section Photographs of Test Configuration in the test report.

6. “The modular transmitter must be labeled with its own FCC ID number.” Please
see exhibition Label Sample for the FCC ID of this module. And also in the
exhibition Users Manual, there are instructions give to the OEM on how to label
the end product.

Report No. : RF110407E08

Document Created: 2011-05-13 15:58:54
Document Modified: 2011-05-13 15:58:54

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC