C2PC report

FCC ID: PPD-AR5B97-F

Test Report

Download: PDF
FCCID_1266322

Page 1 of 14 EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: melb@emctech.com.au EMI TEST REPORT FOR CERTIFICATION to FCC PART 15 Subpart C (Section 15.247) & RSS-210 Class II Permissive Change FCC ID: PPD-AR5B97-F Industry Canada ID: 4101A-AR5B97F Radio Module: Atheros XSPAN 802.11gbn AR5B97 WLAN Module Host NoteBook: LifeBook T Series Model Numbers: T730 / TH700 Report Number: M100215_FCC_AR5B97_C2PC Issue Date: 10th March 2010 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, inferences or generalisations drawn by the client or others from EMC Technologies Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Technologies Pty Ltd. This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall not be reproduced except in full.

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 2 of 14 EMI TEST REPORT FOR CERTIFICATION to FCC PART 15 Subpart C (Section 15.247) & RSS-210 Class II Permissive Change EMC Technologies Report No. M100215_FCC_AR5B97_C2PC Issue Date: 10th March 2010 CONTENTS 1.0 INTRODUCTION 2.0 GENERAL INFORMATION FCC 15.247 (DTS) RESULTS 3.0 CONDUCTED EMI MEASUREMENTS 4.0 RADIATED SPURIOUS EMI MEASUREMENTS 5.0 PEAK OUTPUT POWER 6.0 CHANNEL BANDWIDTH 7.0 PEAK POWER SPECTRAL DENSITY 8.0 RADIO FREQUENCY EXPOSURE 9.0 ANTENNA REQUIREMENT 10.0 COMPLIANCE STATEMENT 11.0 MEASUREMENT UNCERTAINTIES 12.0 TEST REPORT APPENDICES MEASUREMENT INSTRUMENT DETAILS PHOTOGRAPHS ANTENNA INFORMATION FCC LABELLING DETAILS USER MANUAL RF Exposure Information FCC DOC for LifeBook T Series FCC Part 15B Test Report Atheros FCC 15.247 AR5B97 Test Report This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 3 of 14 EMI TEST REPORT FOR CERTIFICATION to FCC PART 15 Subpart C (Section 15.247) & RSS-210 Class II Permissive Change Report No. M100215_FCC_AR5B97_C2PC Radio Module: Atheros XSPAN 802.11gbn AR5B97 WLAN Module Manufacturer: Atheros Communications Inc FCC ID: PPD-AR5B97-F Industry Canada ID: 4101A-AR5B97F Equipment Type: Intentional Radiator (Transceiver) Host NoteBook: T730 / TH700 LifeBook Manufacturer: Fujitsu Ltd - Mobile Computing Division Address: 1-1 Kamikodanaka 4-Chome, Nakahara-Ku, Kawasaki, Japan Contact: Mr. Tsuyoshi Uchihara Test Standards: FCC Part 15 – Radio Frequency Devices (October 2009) FCC Part 15 Subpart C - Intentional Radiators Section 15.247: 2400 – 2483.5 MHz & 5725 – 5850 MHz Operation Bands ANSI C63.4 – 2003 RSS-210 Issue 7 Low Power Licence-Exempt RadioCommunication Devices Annex 8: 2400–2483.5 MHz & 5725–5850 MHz Operation Bands RSS-102 Issue 1 (Provisional), Evaluation Procedure for Mobile and Portable Radio Transmitters with respect to Health Canada’s Safety Code 6 for Exposure of Humans to Radio Frequency Fields Test Dates: 17th and 19th February 2010 Senior Test Engineer: Chieu Huynh - B.Eng (Hons) Electronics Attestation: I hereby certify that the device(s) described herein were tested as described in this report and that the data included is that which was obtained during such testing. Authorised Signatory: Chieu Huynh Senior EMC Engineer EMC Technologies Pty Ltd This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 4 of 14 EMI TEST REPORT FOR CERTIFICATION to FCC PART 15 Subpart C (Section 15.247) & RSS-210 Class II Permissive Change 1.0 INTRODUCTION EMI testing was performed on the Atheros Half Mini-PCI Wireless LAN Module (HB97 802.11b/g/n 2x2), Model: AR5B97 installed in Fujitsu notebook PC, *Model numbers: T730 / TH700. *The model numbers shown T730 and TH700 are for the same product. The T730 is for commercial market (there is Port-Replicator as option). The TH700 is for consumer market (there is no Port-Replicator). The AR5B97 (HB97 802.11b/g/n 2x2) WLAN transmitter installed in the T730 / TH700 notebook is an Atheros Half Mini-PCI Wireless LAN Module. This module was originally certified by Atheros Communications as a modular approval under FCC ID: PPD-AR5B97-F (Canada ID: 4104A- AR5B97F). The other transmitter installed in the T730 / TH700 notebook is BSMAN3 CSR Bluetooth Module. The Bluetooth module was originally certified by CSR as a modular approval under FCC ID: PIWBSMAN (Canada ID: 5255A-BSMAN). The intention of this Class II Permissive Change application is to enable the certified AR5B97 Atheros module to be co-located with BSMAN3 CSR Bluetooth Module in host system Fujitsu LifeBook T Series, Model: T730 / TH700. Independent antennas are used for each of the Radio modules and simultaneous transmission is possible. The transmitter modules are installed in a controlled environment at the Fujitsu notebook production/assembly factory. Test results and procedures were performed in accordance with the following Federal Communications Commission (FCC) standards/regulations: 47 CFR, Part 15, Subpart C: Rules for intentional radiators (particularly section 15.247) Section 15.203: Antenna requirements Section 15.205: Restricted bands of operation Section 15.207: Conducted Emission Limits Section 15.209: Radiated Emission Limits (General requirements) Section 15.247: Operation in the bands 902-928 MHz, 2400-2483.5 MHz, 5725-5850 MHz The test sample complied with the requirements of 47 CFR, Part 15 Subpart C - Section 15.247. The test sample also complied with the Industry Canada RSS-210 issue 7 - Low Power Licence- Exempt Radiocommunication Devices (All Frequency Bands): Category I Equipment, Annex 8 and the RF exposure requirements of RSS-102. The measurement procedure used was in accordance with ANSI C63.4-2003. The instrumentation conformed to the requirements of ANSI C63.2-1996. This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 5 of 14 1.1 Summary of Results FCC Subpart C, Section 15.247 FCC Part 15 Industry Canada Test Performed Results Subpart C RSS-210 Issue 7 Clauses and RSS-Gen Clauses 15.203 RSS-Gen (7.1.4) Antenna Requirement Complies 15.205 2.2 (Table 1) Operation in Restricted Band Complies 15.207 RSS-Gen (7.2.2) Conducted Emissions Note 1 15.209 RSS-Gen (6) Radiated Emissions Complies 15.247 (a)(2) A8.1 (b) (d) Channel Bandwidth Note 2 15.247 (b)(3) A8.4 Peak Output Power Note 2 15.247 (c) RSS-Gen (7.1.4) Antenna Gain > 6 dBi Not Applicable. Antenna gain < 6 dBi 15.247 (d) A8.5 Out of Band Emissions Complies 15.247 (e) A8.2 (b) Peak Power Spectral Density Note 2 15.247 (f) A8.3 Hybrid Systems (Note 3) Not Applicable. EUT does not employ a hybrid system 15.247 (g) A8.1 Frequency Hopping Not Applicable. EUT does not employ frequency hopping 15.247 (h) A8.1 Frequency Hopping Not Applicable. EUT does not employ frequency hopping 15.247 (i) RSS-Gen (5.5) Radio Frequency Hazard Complies Note 1: Refer to FCC Part 15B Test Report Note 2: Refer to original approval under FCC ID: PPD-AR5B97 (Canada ID: 4104A-AR5B97) Note 3: Hybrid systems are those that employ a combination of both frequency hopping and digital modulations technique. 1.2 Modifications by EMC Technologies No modifications were required. This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 6 of 14 2.0 GENERAL INFORMATION (Information supplied by the Client) 2.1 EUT (WLAN) Details Transmitter: Half Mini-Card Wireless LAN Module Wireless Module: HB97 (11b/g/n) 2x2 Model Number: AR5B97 Manufacturer: Atheros Communication Inc, Modulation Type: Direct Sequence Spread Spectrum (DSSS for 802.11b) Orthogonal Frequency Division Multiplexing (OFDM for 802.11g/n) 2.4 GHz (802.11b/g/n): CCK, DQPSK, DBPSK, BPSK, QPSK, 16QAM and 64QAM Maximum Data Rate: 802.11b = 11Mbps 802.11g = 54Mbps 802.11n = 300 Mbps Frequency Ranges: 2.412 –2.462 GHz for 11b/g/n Number of Channels: 11 channels for 11b/g/n with 20 MHz bandwidth 7 channels for 11n with 40 MHz bandwidth Antenna Types: Nissei Inverted F (1st , 2nd ) Locations: Left Top edge of LCD screen(1st), Right Top edge of LCD screen(2 nd) Antenna gain: Max antenna gain is less than 6 dBi. Refer antenna data provided separately Power Supply: 3.3 VDC from PCI Express bus Channels and Output Powers: Modes Channels Frequency Average Output MHz Power (dBm) 1 2412 17.02 802.11b 6 2437 17.25 11 2462 16.21 1 2412 14.8 802.11g 6 2437 17.6 11 2462 11.94 802.11n 1 2412 13.88 20 MHz 6 2437 17.37 11 2462 11.32 802.11n 3 2422 12.15 40 MHz 6 2437 15.13 9 2452 10.1 The AR5B97 is capable of using multiple antennas transmitting simultaneously (two antennas). In any two antennas transmitting, the power level is 3 dB lower (50%) for each antenna port than if a single antenna was transmitting. This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 7 of 14 2.2 Host (Notebook PC) Details Host: LifeBook T series *Model Numbers: T730 / TH700 Serial Number: Pre-production Sample Manufacturer: FUJITSU LIMITED CPU Type and Speed: Core i7 M620 2.66GHz LCD 12.1”WXGA Wired LAN: Intel 82577LM / 82577LC: 10 Base-T/100 Base-TX/1000Base-T Modem: None Port Replicator Model: FPCPR94 AC Adapter Model: 80W: SEE100P2-19.0 (Sanken) and ADP-80NB A (Delta) Voltage: 19V Current Specs: 4.22A Watts: 80W *The model numbers shown T730 and TH700 are for the same product. The T730 is for commercial market (there is Port-Replicator as option). The TH700 is for consumer market (there is no Port-Replicator). 2.3 Test Configuration The Atheros WLAN test software “ART” was used to transmit continuously during the tests. Conducted tests were performed at the WLAN Antenna ports. Radiated tests were performed for measuring the harmonics and spurious from the transmitters. 2.4 Test Procedure Emissions measurements were performed in accordance with the procedures of ANSI C63.4- 2003. Radiated emissions tests were performed at a distance of 1 and 3 metres from the EUT. 2.5 Test Facility 2.5.1 General EMC Technologies Pty Ltd is listed by the FCC as a test laboratory able to perform compliance testing for the public. EMC Technologies is listed as an FCC part 47CFR2.948 test lab and may perform the testing required under Parts 15 and 18 – FCC Registration Number 90560 EMC Technologies Pty Ltd has also been accredited as a Conformity Assessment Body (CAB) by Australian Communications and Media Authority (ACMA) under the APECTEL MRA and is designated to perform compliance testing on equipment subject to Declaration of Conformity (DoC) and Certification under Parts 15 & 18 of the FCC Commission’s rules – Registration Number 494713 & Designation number AU0001. EMC Technologies open area test site (OATS) has also been accepted by Industry Canada for the performance of radiated measurements in accordance with RSS 212, Issue 1 (Provisional) - Industry Canada OATS number - IC 3569B-1. Radiated Emission measurements were performed at EMC Technologies Open Area Test Site (OATS) situated at Lerderderg Gorge, near the township of Bacchus Marsh in Victoria, Australia. Conducted measurements at an antenna ports were performed at EMC Technologies' laboratory in Keilor Park, Victoria Australia. This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 8 of 14 2.5.2 NATA Accreditation EMC Technologies is accredited in Australia to test to the following standards by the National Association of Testing Authorities (NATA). “FCC Part 15 unintentional and intentional emitters in the frequency range 9kHz to 18 GHz excluding TV receivers (15.117 and 15.119), TV interface devices (15.115), cable ready consumer electronic equipment (15.118), cable locating equipment (15.213) and unlicensed national information infrastructure devices (Sub part E).” The current full scope of accreditation can be found on the NATA website: www.nata.asn.au It also includes a large number of emissions, immunity, SAR, EMR and Safety standards. NATA is the Australian national laboratory accreditation body and has accredited EMC Technologies to operate to the IEC/ISO17025 requirements. A major requirement for accreditation is the assessment of the company and its personnel as being technically competent in testing to the standards. This requires fully documented test procedures, continued calibration of all equipment to the National Standard at the National Measurements Institute (NMI) and an internal quality system to ISO 9002. NATA has mutual recognition agreements with the National Voluntary Laboratory Accreditation Program (NVLAP) and the American Association for Laboratory Accreditation (A2LA). 2.6 Test Equipment Calibration All measurement instrumentation and transducers were calibrated in accordance with the applicable standards by an independent NATA registered laboratory such as Agilent Technologies (Australia) Pty Ltd or the National Measurement Institute (NMI). All equipment calibration is traceable to Australia national standards at the National Measurements Institute. The reference antenna calibration was performed by NMI and the working antennas (biconical and log-periodic) calibrated by the EMC Technologies. The complete list of test equipment used for the measurements, including calibration dates and traceability is contained in Appendix A 2.7 Ambients at OATS The Open Area Test Site (OATS) is an area of low background ambient signals. No significant broadband ambients are present however commercial radio and TV signals exceed the limit in the FM radio, VHF and UHF television bands. Radiated prescan measurements were performed in the shielded enclosure to check for possible radiated emissions at the frequencies where the OATS ambient signals exceeded the test limit. This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 9 of 14 FCC 15.247 (DTS) RESULTS 3.0 CONDUCTED EMISSION MEASUREMENTS Testing was performed by Fujitsu General EMC Laboratory, JAPAN accredited by NVLAP (Lab Code: 200373-0). 4.0 RADIATED SPURIOUS EMISSION MEASUREMENTS 4.1 Test Procedure Testing was performed in accordance with the requirements of FCC Part 15.247(d). Radiated emission measurements were performed to the limits as per section 15.209 and 15.247. The measurements were made at the open area test site. All measurements above 1 GHz were made over a distance of 3 and 1 metres. Calibrated EMCO 3115, EMCO 3116 and ETS standard gain horn antennas were used for measurements between 1 to 25 GHz. The measurement of emissions above 1000 MHz was measured using a following setting: Peak measurements setting: RBW = VBW = 1 MHz Average measurements setting: RBW = 1 MHz and VBW = 10 Hz The receiver bandwidth was set to 6 dB. The EUT was slowly rotated with the Peak Detector set to Max-Hold. This was performed for two antenna heights. When an emission was located, it was positively identified and its maximum level found by rotating the automated turntable, and by varying the antenna height. Each significant peak was investigated with the Peak/Average Detectors. The measurement data for each frequency range was corrected for cable losses, antenna factors and preamplifier gain. This process was performed for both horizontal and vertical antenna polarisations. 4.2 Calculation of field strength The field strength was calculated automatically by the software using all the pre-stored calibration data. The method of calculation is shown below: E = V + AF - G + L Where: E = Radiated Field Strength in dBµV/m. V = EMI Receiver Voltage in dBµV. (measured value) AF = Antenna Factor in dB(m¯¹). (stored as a data array) G = Preamplifier Gain in dB. (stored as a data array) L = Cable loss in dB. (stored as a data array of Insertion Loss versus frequency) • Example Field Strength Calculation Assuming a receiver reading of 34.0 dBµV is obtained at 90 MHz, the Antenna Factor at that frequency is 9.2 dB. The cable loss is 1.9 dB while the preamplifier gain is 20 dB. The resulting Field Strength is therefore as follows: 34.0 + 9.2 + 1.9 - 20 = 25.1 dBµV/m This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 10 of 14 4.3 Radiated Emissions (Spurious and Harmonics) This transmitter module was originally tested and certified by the manufacturer as a stand- alone module outside a laptop (host) with higher gain antennas. Refer to manufacturer’s original FCC 15.247 AR5B97 test report for full results showing compliance with the spurious and harmonics limits. However, to ensure the transmitter module install in T730 / TH700 LifeBook is still in compliance, verification tests were performed at the worst case (frequencies with higher average output power) or selected frequencies for harmonics and spurious emissions. All orientations were investigated and tested. Worst results were reported below. 4.3.1 Frequency Band: 1 – 25 GHz The 74 dBµV/m @ 3m and 54 dBµV/m @ 3m limits are applied for emissions fall in the restricted bands. The limits for emission outside the restricted band are 20 dB below the fundamental field strength. 4.3.1.1 Configuration 802.11b Initial investigations were performed with all data rates: (1 Mbps to 11 Mbps). Final testing was performed while the transmitter continuously operated with the data rate of 1 Mbps. Harmonics were measured for channels where the average output power was highest. Channel 6 - 2437 MHz Frequency Peak Average Peak Average Result MHz Detector Detector Limit Limit dBuV/m dBuV/m dBuV/m dBuV/m 2437 108.0 104.9 Transmitter Fundamental Level 4874 55.8 54.0 74.0 54.0 Complied Result: Harmonic and spurious emissions were recorded up to 25 GHz. Other harmonics were confirmed low with both RBW and VBW reduced. The worst case emissions complied with the FCC limits of sections 15.209 and 15.247 by a margin of 0 dB. This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 11 of 14 4.3.1.2 Configuration 802.11g and 802.11n Harmonics were measured for channels where the average output power was highest. Initial investigations were performed with all data rates: (6 Mbps to 54 Mbps and MCS0 to MCS7). Final testing was performed while the transmitter continuously operated in the worst case condition. Channel 6 - 2437 MHz Modes Data Frequency Peak Average Peak Average Result Rates MHz Detector Detector Limit Limit dBuV/m dBuV/m dBuV/m dBuV/m 2437 111.8 100.9 Transmitter Fundamental Level 802.11g 6 Mbps 4874 55.0 42.6 74.0 54.0 Complied 802.11n 2437 110.8 99.6 Transmitter Fundamental Level 20 MHz MCS0 4874 55.4 41.8 74.0 54.0 Complied 802.11n 2437 105.9 94.8 Transmitter Fundamental Level 40 MHz MCS0 4874 51.1 37.0 74.0 54.0 Complied Result: Spurious emissions were recorded up to 25 GHz. Harmonics were confirmed low with both RBW and VBW reduced. The worst case emissions complied with the FCC limits of sections 15.209 and 15.247 by a margin of greater than 10 dB. 4.3.2 Frequency Band: 30 - 1000 MHz Testing was performed by Fujitsu General EMC Laboratory, JAPAN accredited by NVLAP (Lab Code: 200373-0). 4.3.3 RF Conducted Measurements at the Antenna Terminal (including Band Edge) Refer to original approval under FCC ID: PPD-AR5B97 (Canada ID: 4104A-AR5B97) certified by Atheros. Testing was performed by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch. This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 12 of 14 5.0 PEAK OUTPUT POWER - Section 15.247 (b)(3) Refer to original approval under FCC ID: PPD-AR5B97 (Canada ID: 4104A-AR5B97) certified by Atheros. Testing was performed by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch. 6.0 CHANNEL BANDWIDTH Refer to original approval under FCC ID: PPD-AR5B97 (Canada ID: 4104A-AR5B97) certified by Atheros. Testing was performed by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch. 7.0 PEAK POWER SPECTRAL DENSITY Refer to original approval under FCC ID: PPD-AR5B97 (Canada ID: 4104A-AR5B97) certified by Atheros. Testing was performed by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch. 8.0 RADIO FREQUENCY EXPOSURE (HAZARD) INFORMATION Testing was performed in accordance with the requirements of FCC Part 15.247(i) Spread spectrum transmitters operating in the 2400 - 2483.5 MHz and 5725 – 5850 MHz bands are required to be operated in a manner that ensures that the public is not exposed to RF energy levels in accordance with CFR 47, Section 1.1307(b)(1). In accordance with this section and also section 2.1093 this device has been defined as a portable device. SAR testing was performed in accordance with OET Bulletin 65 and reported under EMC Technologies reports M100216_FCC_AR5B97_SAR_2.4 (2.4 GHz). SAR values of 1.29 mW/g was measured which complied with the FCC human exposure requirements of 47 CFR 2.1093(d). 9.0 ANTENNA REQUIREMENT This intentional radiator was designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 13 of 14 10.0 COMPLIANCE STATEMENT The Atheros Half Mini-PCI Wireless LAN Module (HB97 802.11b/g/n 2x2), Model: AR5B97 installed in Fujitsu notebook PC, Model: T730 / TH700, complied with the requirements of 47 CFR, Part 15 Subpart C - Rules for Radio Frequency Devices (intentional radiators), Section 15.247 - Operation in the frequency band 2400 - 2483.5 MHz. The test sample also complied with the Industry Canada RSS-210 issue 7 - Low Power Licence- Exempt Radiocommunication Devices (All Frequency Bands): Category I Equipment, Annex 8 and the RF exposure requirements of RSS-102. Results were as follows: FCC Subpart C, Section 15.247 FCC Part 15 Industry Canada Test Performed Results Subpart C RSS-210 Issue 7 Clauses and RSS-Gen Clauses 15.203 RSS-Gen (7.1.4) Antenna Requirement Complies 15.205 2.2 (Table 1) Operation in Restricted Band Complies 15.207 RSS-Gen (7.2.2) Conducted Emissions Note 1 15.209 RSS-Gen (6) Radiated Emissions Complies 15.247 (a)(2) A8.1 (b) (d) Channel Bandwidth Note 2 15.247 (b)(3) A8.4 Peak Output Power Note 2 15.247 (c) RSS-Gen (7.1.4) Antenna Gain > 6 dBi Not Applicable. Antenna gain < 6 dBi 15.247 (d) A8.5 Out of Band Emissions Complies 15.247 (e) A8.2 (b) Peak Power Spectral Density Note 2 15.247 (f) A8.3 Hybrid Systems (Note 3) Not Applicable. EUT does not employ a hybrid system 15.247 (g) A8.1 Frequency Hopping Not Applicable. EUT does not employ frequency hopping 15.247 (h) A8.1 Frequency Hopping Not Applicable. EUT does not employ frequency hopping 15.247 (i) RSS-Gen (5.5) Radio Frequency Hazard Complies Note 1: Refer to FCC Part 15B Test Report Note 2: Refer to original approval under FCC ID: PPD-AR5B97 (Canada ID: 4104A-AR5B97) Note 3: Hybrid systems are those that employ a combination of both frequency hopping and digital modulations technique. This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au

FCC ID: PPD-AR5B97-F (IC: 4104A-AR5B97F) Report No. M100215_FCC_AR5B97_C2PC Page 14 of 14 11.0 MEASUREMENT UNCERTAINTIES EMC Technologies has evaluated the equipment and the methods used to perform the emissions testing. The estimated measurement uncertainties for emissions tests shown within this report are as follows: Conducted Emissions: 9 kHz to 30 MHz ±3.2 dB Radiated Emissions: 30 MHz to 300 MHz ±5.1 dB 300 MHz to 1000 MHz ±4.7 dB 1 GHz to 18 GHz ±4.6 dB The above expanded uncertainties are based on standard uncertainties multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95%. 12.0 TEST REPORT APPENDICES MEASUREMENT INSTRUMENT DETAILS PHOTOGRAPHS ANTENNA INFORMATION FCC LABELLING DETAILS USER MANUAL RF Exposure Information FCC DOC for LifeBook T Series FCC Part 15B Test Report Atheros FCC 15.247 AR5B97 Test Report This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate of pg 3 may be reproduced in full. www.emctech.com.au


Document Created: 2010-03-16 16:32:15
Document Modified: 2010-03-16 16:32:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC