RF exposure Info 3 of 5

FCC ID: PPD-AR5B95-H

RF Exposure Info

Download: PDF
FCCID_1194329

Date/Time: 10/5/2009 5:23:51 PM Test Laboratory: Compliance Certification Services Secondary Landscape DUT: HP; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2412 MHz; σ = 1.85 mho/m; εr = 52.4; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11b L-ch/Area Scan (10x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.21 mW/g Lapheld, 802.11b L-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 23.8 V/m; Power Drift = 0.113 dB Peak SAR (extrapolated) = 2.35 W/kg SAR(1 g) = 0.925 mW/g; SAR(10 g) = 0.403 mW/g Maximum value of SAR (measured) = 1.25 mW/g 0 dB = 1.25mW/g

Date/Time: 10/5/2009 3:51:07 PM Test Laboratory: Compliance Certification Services Secondary Landscape DUT: HP; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.88 mho/m; εr = 52.3; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11b M-ch/Area Scan (10x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.25 mW/g Lapheld, 802.11b M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 24.2 V/m; Power Drift = 0.332 dB Peak SAR (extrapolated) = 2.40 W/kg SAR(1 g) = 0.968 mW/g; SAR(10 g) = 0.404 mW/g Maximum value of SAR (measured) = 1.35 mW/g 0 dB = 1.35mW/g

Date/Time: 10/5/2009 4:30:22 PM Test Laboratory: Compliance Certification Services Secondary Landscape DUT: HP; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2462 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2462 MHz; σ = 1.89 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11b H-ch/Area Scan (10x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.45 mW/g Lapheld, 802.11b H-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 26.7 V/m; Power Drift = 0.117 dB Peak SAR (extrapolated) = 2.62 W/kg SAR(1 g) = 1.09 mW/g; SAR(10 g) = 0.446 mW/g Maximum value of SAR (measured) = 1.50 mW/g 0 dB = 1.50mW/g

Date/Time: 10/5/2009 4:55:40 PM Test Laboratory: Compliance Certification Services Secondary Landscape DUT: HP; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2462 MHz;Duty Cycle: 1:1 Lapheld, 802.11b H-ch/Z Scan (1x1x29): Measurement grid: dx=20mm, dy=20mm, dz=3.5mm Maximum value of SAR (measured) = 1.52 mW/g

Date/Time: 10/5/2009 6:14:10 PM Test Laboratory: Compliance Certification Services Secondary Landscape_Yageo Antenna DUT: HP; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2462 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2462 MHz; σ = 1.89 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11b H-ch/Area Scan (10x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.41 mW/g Lapheld, 802.11b H-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 24.3 V/m; Power Drift = 0.253 dB Peak SAR (extrapolated) = 2.38 W/kg SAR(1 g) = 0.923 mW/g; SAR(10 g) = 0.427 mW/g Maximum value of SAR (measured) = 1.37 mW/g 0 dB = 1.37mW/g

Date/Time: 10/6/2009 9:58:41 AM Test Laboratory: Compliance Certification Services Secondary Landscape DUT: HP; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2412 MHz; σ = 1.86 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11n 20MHz L-ch/Area Scan (10x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.308 mW/g Lapheld, 802.11n 20MHz L-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 9.70 V/m; Power Drift = 1.21 dB Peak SAR (extrapolated) = 0.944 W/kg SAR(1 g) = 0.398 mW/g; SAR(10 g) = 0.163 mW/g Maximum value of SAR (measured) = 0.543 mW/g 0 dB = 0.543mW/g

Date/Time: 10/6/2009 8:59:18 AM Test Laboratory: Compliance Certification Services Secondary Landscape DUT: HP; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.89 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11n 20MHz M-ch/Area Scan (10x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.04 mW/g Lapheld, 802.11n 20MHz M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 21.6 V/m; Power Drift = 1.17 dB Peak SAR (extrapolated) = 2.51 W/kg SAR(1 g) = 1.04 mW/g; SAR(10 g) = 0.426 mW/g Maximum value of SAR (measured) = 1.41 mW/g 0 dB = 1.41mW/g

Date/Time: 10/6/2009 9:29:21 AM Test Laboratory: Compliance Certification Services Secondary Landscape DUT: HP; Type: NA; Serial: NA Communication System: 802.11bgn; Frequency: 2462 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2462 MHz; σ = 1.9 mho/m; εr = 52; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11n 20MHz H-ch/Area Scan (10x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.321 mW/g Lapheld, 802.11n 20MHz H-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 9.78 V/m; Power Drift = 2.03 dB Peak SAR (extrapolated) = 0.982 W/kg SAR(1 g) = 0.414 mW/g; SAR(10 g) = 0.169 mW/g Maximum value of SAR (measured) = 0.565 mW/g 0 dB = 0.565mW/g

Date/Time: 10/6/2009 10:27:15 AM Test Laboratory: Compliance Certification Services Primary Portrait DUT: HP; Type: NA; Serial: NA Communication System: 802.11bg; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.89 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11b M-ch/Area Scan (10x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.092 mW/g Lapheld, 802.11b M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.86 V/m; Power Drift = -0.154 dB Peak SAR (extrapolated) = 0.287 W/kg SAR(1 g) = 0.092 mW/g; SAR(10 g) = 0.044 mW/g Maximum value of SAR (measured) = 0.125 mW/g 0 dB = 0.125mW/g

Date/Time: 10/6/2009 10:52:08 AM Test Laboratory: Compliance Certification Services Primary Portrait DUT: HP; Type: NA; Serial: NA Communication System: 802.11bg; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.89 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11n 20MHz M-ch/Area Scan (10x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.078 mW/g Lapheld, 802.11n 20MHz M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.35 V/m; Power Drift = -0.223 dB Peak SAR (extrapolated) = 0.225 W/kg SAR(1 g) = 0.087 mW/g; SAR(10 g) = 0.036 mW/g Maximum value of SAR (measured) = 0.119 mW/g 0 dB = 0.119mW/g

Date/Time: 10/6/2009 11:29:22 AM Test Laboratory: Compliance Certification Services Secondary Portrait DUT: HP; Type: NA; Serial: NA Communication System: 802.11bg; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.89 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11b M-ch/Area Scan (10x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.028 mW/g Lapheld, 802.11b M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 3.15 V/m; Power Drift = -1.93 dB Peak SAR (extrapolated) = 0.069 W/kg SAR(1 g) = 0.031 mW/g; SAR(10 g) = 0.013 mW/g Maximum value of SAR (measured) = 0.044 mW/g 0 dB = 0.044mW/g

Date/Time: 10/6/2009 11:55:04 AM Test Laboratory: Compliance Certification Services Secondary Portrait DUT: HP; Type: NA; Serial: NA Communication System: 802.11bg; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.89 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11n 20MHz M-ch/Area Scan (10x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.025 mW/g Lapheld, 802.11n 20MHz M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 2.41 V/m; Power Drift = 0.573 dB Peak SAR (extrapolated) = 0.072 W/kg SAR(1 g) = 0.029 mW/g; SAR(10 g) = 0.013 mW/g Maximum value of SAR (measured) = 0.042 mW/g 0 dB = 0.042mW/g

Date/Time: 10/6/2009 3:28:39 PM Test Laboratory: Compliance Certification Services Lapheld DUT: HP; Type: NA; Serial: NA Communication System: 802.11bg; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.89 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11b M-ch/Area Scan (10x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.060 mW/g Lapheld, 802.11b M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 5.37 V/m; Power Drift = -0.100 dB Peak SAR (extrapolated) = 0.170 W/kg SAR(1 g) = 0.052 mW/g; SAR(10 g) = 0.028 mW/g Maximum value of SAR (measured) = 0.061 mW/g 0 dB = 0.061mW/g

Date/Time: 10/6/2009 3:59:58 PM Test Laboratory: Compliance Certification Services Lapheld DUT: HP; Type: NA; Serial: NA Communication System: 802.11bg; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2437 MHz; σ = 1.89 mho/m; εr = 52.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Lapheld, 802.11n 20MHz M-ch/Area Scan (10x12x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.055 mW/g Lapheld, 802.11n 20MHz M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 5.23 V/m; Power Drift = 0.387 dB Peak SAR (extrapolated) = 0.103 W/kg SAR(1 g) = 0.055 mW/g; SAR(10 g) = 0.046 mW/g Maximum value of SAR (measured) = 0.063 mW/g 0 dB = 0.063mW/g


Document Created: 2009-10-07 09:35:27
Document Modified: 2009-10-07 09:35:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC