SAR test report 2 of 4

FCC ID: PPD-AR5B95-H

RF Exposure Info

Download: PDF
FCCID_1191880

Date/Time: 10/7/2009 9:15:23 AM Test Laboratory: Compliance Certification Services System Performance Check - D2450V2 DUT: Dipole ; Type: D2450V2; Serial: 748 Communication System: System Check Signal - CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.88 mho/m; εr = 51.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.48, 6.48, 6.48); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 17.2 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 95.2 V/m; Power Drift = 0.008 dB Peak SAR (extrapolated) = 106.2 W/kg SAR(1 g) = 53.2 mW/g; SAR(10 g) = 25 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 69.1 mW/g 0 dB = 69.1mW/g

Date/Time: 10/7/2009 9:24:31 AM Test Laboratory: Compliance Certification Services System Performance Check - D2450V2 DUT: Dipole ; Type: D2450V2; Serial: 748 Communication System: System Check Signal - CW; Frequency: 2450 MHz;Duty Cycle: 1:1 d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 17.3 mW/g


Document Created: 2009-10-07 12:03:58
Document Modified: 2009-10-07 12:03:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC