Antenna specification 15

FCC ID: PPD-AR5B91

Parts List/Tune Up Info

Download: PDF
FCCID_1051929

INPAQ TECHNOLOGY CO., LTD 2008/11/07 2.4GHz Antenna_for DAMA1BM30000402 1. Explanation of Part Number DAM A1 B M3 000 04 02 (1) (2) (3) (4) (5) (6) (7) (1) Product type : DAM-Dipole Antenna Module (2) Appearance Series : A1 (3) Frequency : B =2.4G (4) Coaxial Cable Specification : M3=Mini coaxial 1.3mm (5) Coaxial Cable Length : 000=no Length (6) Connector Types :04=小 SMA Reverse connector (7) Suffix for special requirements : 02=no cable ※ RoHS Compliant 2. Electrical properties: Item Property y Frequency Range 2.4~2.5GHz Impedance 50 Ω (Typ.) VSWR Return Loss Peak Gain ar 2.0 max. -10 dB max. 3.2 dBi (Peak) 2450MHz in Polarization Type Vertical Type of Radiation O mni im Admitted Power 1W Electrical Wave 1/2λdipole Figure 1. VSWR el Pr 2400MHz 1.40 2450MHz 1.32 2500MHz 1.22 4UNLESS OTHER SPECIFIED TOLERANCES ON： X＝ X.X＝ X.XX ＝ INPAQ TECHNOLOGY CO., LTD. ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS DRAWN BY：曾玟瑛 CHECKED BY：楊奇峰 THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DESIGNED BY：陳智崴 APPROVED BY：蔡岳霖 DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE：2.4GHz Antenna For DAMA1BM3000402 ENS000009980 NO. P1 PAGE 1 OF 4

INPAQ TECHNOLOGY CO., LTD 2008/11/07 2-1Radiation Pattern 2-1-1 System Set up i. Using a low loss coaxial cable to link a standard handset jig ii. Fixed this handset jig on chamber’s rotator plane iii. Linking coaxial cable into network analyzer port and using a probing horn antenna to collect data. iv. Data collecting for each 15 degree. v. Using another standard gain horn antenna to calibrated those data 2-1-2 Chamber definition i. An anechoic chamber (10mx5mx5m) which satisfied far-field condition was applied to avoid multi-path effect ii. The quite room region is 40cmx40cmx40cm at the center of rotator (DUT size should small than this space) iii. The Probing antenna is Double Ridge Horn Antenna which is placed in the one side of chamber room. And the antenna under testing(AUT) is placed in the other side of the y chamber. iv. The gain is calibrated by the standard gain horn antenna, and we do the gain calibration v. in each measurement. ar We use the Agilent 8720ES for the pattern measure. in im el Pr 2400MHz 2450MHz 2500MHz 4UNLESS OTHER SPECIFIED TOLERANCES ON： X＝ X.X＝ X.XX ＝ INPAQ TECHNOLOGY CO., LTD. ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS DRAWN BY：曾玟瑛 CHECKED BY：楊奇峰 THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DESIGNED BY：陳智崴 APPROVED BY：蔡岳霖 DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE：2.4GHz Antenna For DAMA1BM3000402 ENS000009980 NO. P1 PAGE 2 OF 4

INPAQ TECHNOLOGY CO., LTD 2008/11/07 3. Mechanical properties: Item Property Color Black Coaxial-Cable WEIYANG OD1.37 GRAY Housing TPEE Hinge Please refer the drawing Connector SMA PLUS Reverse Core N/A Operating Temperature : -20~+65℃ Storage Temperature : -40~+80℃ 4. Environmental Characteristics: No Item Test Condition Specification 1.Temperature：+60±2℃. 1. Normal functional test 4-1 High Temperature/Humidity 2.Humidity：90~95%RH must be satisfied after 3.Time：24hrs the test. ry 1.Temperature：-20±2℃. 2. No material 4-2 Low Temperature/Humidity 2.Humidity：0%RH deformation is 3.Time：24hrs allowed. 4-3 High Temperature/Humidity a 1.Temperature：+80±2℃. 2.Humidity：90~95%RH in Storage 3.Time：88hrs 1.Temperature：-40±2℃. 4-4 Low Temperature/Humidity im 2.Humidity：0%RH Storage 3.Time：28hr 1.Temperature：-40~+75℃ 2.Duration： el z88 Hours, 4-5 Temperature z45min/dwelling -40℃, Cycle Operating Test Pr z10℃per min./transition from –40℃ to 75℃, z45min/dwelling 75℃, 1.Temperature：-40±℃~+75℃. 4-6 Temperature Shock Test 2.Time：30 minutes/dwelling, 5 minutes/ transition, 24 cycles 4UNLESS OTHER SPECIFIED TOLERANCES ON： X＝ X.X＝ X.XX ＝ INPAQ TECHNOLOGY CO., LTD. ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS DRAWN BY：曾玟瑛 CHECKED BY：楊奇峰 THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DESIGNED BY：陳智崴 APPROVED BY：蔡岳霖 DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE：2.4GHz Antenna For DAMA1BM3000402 ENS000009980 NO. P1 PAGE 3 OF 4

INPAQ TECHNOLOGY CO., LTD 2008/11/07 Physical Dimension: y ar in im el Pr 4UNLESS OTHER SPECIFIED TOLERANCES ON： X＝ X.X＝ X.XX ＝ INPAQ TECHNOLOGY CO., LTD. ANGLES＝± HOLEDIA＝± SCALE： UNIT：mm THIS DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF INPAQ TECHNOLOGY CO.,LTD.AND SHALL NOT BE REPRODUCED OR USED AS DRAWN BY：曾玟瑛 CHECKED BY：楊奇峰 THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DESIGNED BY：陳智崴 APPROVED BY：蔡岳霖 DEVICES WITHOUT PERMISSION DOCUMENT SPEC REV. TITLE：2.4GHz Antenna For DAMA1BM3000402 ENS000009980 NO. P1 PAGE 4 OF 4


Document Created: 2008-12-23 09:37:34
Document Modified: 2008-12-23 09:37:34
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC