Antenna specification 12

FCC ID: PPD-AR5B91

Parts List/Tune Up Info

Download: PDF
FCCID_1051926

(EMC Use) l Product Type l WLAN Antenna l Notebook Model Number l ASUS / EBOX l Part No. / YAGEO / Main l CAN4313748012501B l Part No. / YAGEO / 2 END Cable l CAN4313748032501B Yageo (Taiwan) Ltd. 16, west 3rd Street, N.E.P.Z Kaohsiung, 811 Taiwan, R.O.C Yageo Electronics (China) Co, Ltd No. 10, Zhu Yuan Road, Suzhou New District, Suzhou, PRC R01 Apr. 18, 08 2.45/5GHz Multi Band and WWAN Yageo Corporation SPD Antenna with Cable & Connector for Datasheet Current Revision: IEEE802.11b, 11g, 11a, 11n UNII R01 BY / Candy Lin DATE / Apr. 18, 2008 1

Table of Contents 1. Specifications 1.1 Specifications 1.2 Antenna Dimension / Cable Length 1.3 Packing Spec. 1.4 Antenna Pictures 2. Test Methodology 2.1 Test Equipment 2.2 Test Setup 2.2.1 Frequency Range 2.2.2 Antenna Configuration 2.2.3 VSWR 2.2.4 Radiation Pattern and Gain 3. Performance Data 3.1 VSWR in the Fixture (Main Antenna) 3.2 Radiation Pattern and Gain 3.2.1 Low Frequency (2.40GHz~2.50GHz) (Main) 4. Antenna Drawing 5. Reliability Data for Antenna Patch 6. Ordering Information: Yageo Ordering P/N Code 7. Revision Control 2

moste sumimemcoMPOEOQ Specification; 1.1 Specifications for Antennas 240 ~ 2.50 for 802.11b/g/n Frequency Range (GHz) 5.15 ~ 5.85 for 802.11a 2.50 for 24GHz band For WL VSWR 2.50 for SGHz band For WL Peak Gain (dBi) —0.230Bi for 2.4GHz band MiniPCI Connector Ipex Impedance 500 Operating Temperature »40—90°C Maximum Power 1W Polarization Linear Radiation Pattern Omni—Directional 1.2 Anterna Dimension / Cable Length Product ASUS /EBOX Main antenna (LCD) 38.65%7.6%0.3 mm /88.0 mm, Color Black 2 nd cable (LCD) 40.0 mm, Color Black 1.3 Packing Spec. Product For Example Tanertray so Carton box.| 265*100 Note: Real packing will base on current project type and samples quantity to definition. CONFIDENTIAL Phicomp

CONFIDENTIAL Phicomp

2. Test Methodology 2.1 Test Equipment The equipment for the antenna measurement we used is as follows. A. Agilent 8753ET / 8719D Network Analyzer to measure the VSWR and input impedance. B. Three-dimensional anechoic chamber to measure the gain (Standard dipole and horn were used to calibrate the chamber) C. Digital caliper to measure the dimensions. D. Climatic chamber for mechanical tests. 2.2 Test Setup 2.2.1 Frequency Range 2.40 ~ 2.50GHz, 5.15 ~ 5.85GHz for WLAN 900 / 1800 / 1900 / 2100MHz for WWAN 2.2.2 Antenna configuration The antenna basically has two parts; the stamping and the cable assembly with the connector on one side. The detailed drawing is attached. 2.2.3 VSWR The VSWR is measured with Agilent 8753ET / 8719D network analyzer. All the measurements are performed with the customer provided fixture. Figure 1 shows the schematic diagram for measuring VSWR. Agilent 8753ET Network Analyzer Test port cable Figure 1. The schematic diagram for measuring VSWR 5

2.2.4 Radiation Pattern and Gain The radiation pattern must have the omni-directional characteristic in both positions. The radiation pattern measurements are performed in the three- dimensional anechoic chamber. The chamber provides less than –30dB reflectivity from 800MHz through 8GHz. The chamber is calibrated using both standard dipole and horn antenna. The gain here is expressed as dBi that standardizes the isotropic antenna. The gain measurements are also performed in the same chamber described previously. Figure 2 shows the schematic diagram for measuring radiation pattern and gain. 2D Anechoic chamber Probe array Controller RF Unit (0.4 ~ 6GHz) Primary Synthesizer Leftiliary Synthesizer Motion Controller Data Acquisition & Processing PC Figure 2. The schematic diagram for measuring radiation pattern and gain 6

3. Performance Data 3.1 VSWR in the fixture (Main antenna) 2.5 7

3.2 Radiation Pattern and Gain 3.2.1 Low Frequency (2.40GHz~2.50GHz) / Main Antenna 2.4GHz 2.45GHz 8

2.5GHz Horizontal Vertical H+V 9

3.2.10 Average Gain (dBi) Summary Frequency Peak (dBi) Average (dBi) H-pol V-pol Total H-pol V-pol Total 2400 MHz -2.65 -1.02 -0.71 -8.39 -8.07 -5.22 2450 MHz -0.56 -1.56 -0.23 -6.91 -8.21 -4.50 2500 MHz -0.95 -3.59 -0.91 -7.49 -9.89 -5.52 10

Inomatie Servted Protective Tube % Mini [L—ng 4 Pel 4B Main Ant / 88 + / — 3mm / Color Black / DD:M‘Smm CONFIDENTIAL ~ Phicomp

5. Reliability Data For Antenna Patch (Reference To IEC) IEC IEC 384-10/ 60068-2 TEST PROCEDURE REQUIREMENTS CECC 32 100 TEST CLAUSE METHOD -40 °C (30 No visible damage Rapid change minutes) to +90 Central Freq. 4.12 4(Na) of °C (30 minutes); Change temperature 5 cycles ± 6% No visible damage 500 ± 12 hours 2 hours recovery at 40 °C; 4.14 3(Ca) Damp heat Central Freq. 90 to 95 % RH Change ± 6% No visible damage 500 ± 12 hours 2 hours recovery 4.15 Endurance at 90 °C; Central Freq. Change ± 6% 12

6. Ordering Information: Yageo Ordering P/N Code The antennas may be ordered by using the Yageo P/N ordering code. These code numbers can be determined by the following rules: CAN4313 7 48 01 250 1B F C MS T A P F. Family Code CAN43 = Antenna C. Packing Type Code 13 = Bulk (1000 pcs) M. Materials Code 6 = High Frequency Material S. Size/Series Code 72= ASUS EBOX Antenna T. Tolerance/Cable 01 = Cable 1 Main / Black, 38.65*7.6*0.3 mm A. Working Frequency 250 = 2.45/5 GHz for Dual Band P. Packing 1B = 1000 pcs packing 13

7. Revision Control Revision Date Content Remark R01 Apr. 18, 2008 New Issued, Metal Antenna N/A. 14


Document Created: 2008-12-03 16:26:50
Document Modified: 2008-12-03 16:26:50
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC