Antenna specification 3

FCC ID: PPD-AR5B91

Parts List/Tune Up Info

Download: PDF
FCCID_1051916

l Product Type l WLAN antenna l Notebook Model Number l ASUS / L50 l Part No. / Yageo / Main / Left l CAN4313794012501B l Part No. / Yageo / Right / Aux l CAN4313794022501B l Part No. / Yageo / MIMO / Left Side l CAN4313 583 032501B Yageo (Taiwan) Ltd. 16, west 3rd Street, N.E.P.Z Kaohsiung, 811 Taiwan, R.O.C Yageo Electronics (China) Co, Ltd No. 10, Zhu Yuan Road, Suzhou New District, Suzhou, PRC R01 Aug. 14, 08 2.45/5GHz Multi Band Antenna with Yageo Corporation SPD Cable & Connector for IEEE802.11b, Datasheet Current Revision: 11g, 11a, 11n, UNII R01 BY / Stella Kuo DATE / Aug. 14, 2008 1

Table of Contents 1. Specifications 1.1 Specifications 1.2 Antenna Dimension / Cable Length 1.3 Packing Spec. 1.4 Antenna Pictures 2. Test Methodology 2.1 Test Equipment 2.2 Test Setup 2.2.1 Frequency Range 2.2.2 Antenna Configuration 2.2.3 VSWR 2.2.4 Radiation Pattern and Gain 3. Performance Data 3.1 VSWR in the Fixture (Main/Aux/MIMO Antenna) 3.2 Radiation Pattern and Gain 3.2.1 Low Frequency (2.40GHz~2.50GHz) (Main) 3.2.2 Middle Frequency (5.15GHz~5.35GHz) 3.2.3 High Frequency (5.47GHz~5.85GHz) 3.2.4 Low Frequency (2.40GHz~2.50GHz) (Aux) 3.2.5 Middle Frequency (5.15GHz~5.35GHz) 3.2.6 High Frequency (5.47GHz~5.85GHz) 3.2.7 Low Frequency (2.40GHz~2.50GHz) (MIMO) 3.2.8 Middle Frequency (5.15GHz~5.35GHz) 3.2.9 High Frequency (5.47GHz~5.85GHz) 3.2.10 Average Gain Summary (Main/Aux/MIMO Antenna) 4. Antenna Drawing 5. Reliability Data for Antenna Patch 6. Ordering Information: Yageo Ordering P/N Code 7. Revision Control 2

moste sumimemcoMPOEOQ Specificatio 1.1 Specifications for Antennas 240 ~ 2.50 for 802.11b/g/n Frequency Range (GHz) 5.15 ~ 5.85 for 802.11a 2.50 for 24GHz band For WL VSWR 2.50 for 5.0GHz band For WL aovae 2.91dBi for 24GHz band Peak Gain (dBi) . 2.59dBi for 5.0GHz band MiniPCI Connector Ipex / Hirose Impedance 500 Operating Temperature »40—90°C Maximum Power 1W Polarization Linear Radiation Pattern Omni—directional 1.2 Anterna Dimension / Cable Length Product ASUS/LS0 Main antenna (LCD) 40.0%8.0*0.4 mm / 725.0 mmn, Color Black Aux antenna (LCD) 40.0%8.0*0.4 mm / 925.0 mm, Color White MIMO anteana (LCD) 40.0%8.0*0.4 mm / 580.0 mm, Color Gray 1.3 Packing Spec. Product For Example Tanertray so Carton box 265#100 CONFIDENTIAL Phicomp

1.4 Antenna Pictures Main Antenna Aux Antenna MIMO Antenna 4

2. Test Methodology 2.1 Test equipment The equipment for the antenna measurement we used is as follows. A. Agilent 8753ET / 8719D Network Analyzer to measure the VSWR and input impedance. B. Three-dimensional anechoic chamber to measure the gain (Standard dipole and horn were used to calibrate the chamber) C. Digital caliper to measure the dimensions. D. Climatic chamber for mechanical tests. 2.2 Test setup 2.2.1 Frequency Range 2.40 ~ 2.50GHz, 5.15 ~ 5.85GHz 2.2.2 Antenna configuration The antenna basically has two parts; the stamping and the cable assembly with the connector on one side. The detailed drawing is attached. 2.2.3 VSWR The VSWR is measured with Agilent 8753ET / 8719D network analyzer. All the measurements are performed with the customer provided fixture. Figure 1 shows the schematic diagram for measuring VSWR. Agilent 8753ET Network Analyzer D.U.T Test port cable Figure 1. The schematic diagram for measuring VSWR 5

2.2.4 Radiation pattern and gain The radiation pattern must have the omni-directional characteristic in both positions. The radiation pattern measurements are performed in the three- dimensional anechoic chamber. The chamber provides less than –30dB reflectivity from 800MHz through 8GHz. The chamber is calibrated using both standard dipole and horn antenna. The gain here is expressed as dBi that standardizes the isotropic antenna. The gain measurements are also performed in the same chamber described previously. Figure 2 shows the schematic diagram for measuring radiation pattern and gain. 2D Anechoic chamber Probe array Controller RF Unit (0.4 ~ 6GHz) Primary Synthesizer Auxiliary Synthesizer Motion Controller Data Acquisition & Processing PC Figure 2. The schematic diagram for measuring radiation pattern and gain 6

3. Performance Data 3.1 VSWR in the Fixture (Main antenna) 2.5 2.5 VSWR in the Fixture (Aux antenna) 7

VSWR in the Fixture (MIMO antenna) 2.5 2.5 8

3.2 Radiation Pattern and Gain 3.2.1 Low Frequency (2.40GHz~2.50GHz) / Main Antenna 2.4GHz 2.45GHz 9

2.5GHz Horizontal Vertical H+V 3.2.2 Middle Frequency (5.15GHz~5.35GHz) / Main Antenna 5.15GHz 10

5.25GHz 5.35GHz Horizontal Vertical H+V 11

3.2.3 High Frequency (5.47GHz~5.85GHz) / Main Antenna 5.47GHz 5.6GHz 12

5.725GHz 5.785GHz 13

5.85GHz Horizontal Vertical H+V 3.2.4 Low Frequency (2.40GHz~2.50GHz) / Aux (Right) Antenna 14

Horizontal Vertical H+V 15

3.2.5 Middle Frequency (5.15GHz~5.35GHz) / Aux (Right) Antenna 16

Horizontal Vertical H+V 3.2.6 High Frequency (5.47GHz~5.85GHz) / Aux (Right) Antenna 17

18

Horizontal Vertical H+V 19

3.2.7 Low Frequency (2.40GHz~2.50GHz) / MIMO Antenna 2.4GHz 2.45GHz 20

2.5GHz Horizontal Vertical H+V 3.2.8 Middle Frequency (5.15GHz~5.35GHz) / MIMO Antenna 5.15GHz 21

5.25GHz 5.35GHz Horizontal Vertical H+V 22

3.2.9 High Frequency (5.47GHz~5.85GHz) / MIMO Antenna 5.47GHz 5.6GHz 23

5.725GHz 5.785GHz 24

5.85GHz Horizontal Vertical H+V 3.2.10 Average Gain (dBi) Summary Main Antenna Gain Max Value (dBi) Average (dBi) Frequency H-pol V-pol Total H-pol V-pol Total 2400(MHz) 1.14 -0.14 2.74 -6.19 -7.01 -3.57 2450(MHz) 0.73 -0.76 2.52 -5.89 -7.27 -3.52 2500(MHz) 1.45 -0.57 2.91 -5.99 -7.80 -3.69 5150(MHz) 0.04 0.63 2.59 -6.23 -6.92 -3.55 5250(MHz) -0.78 -0.74 1.66 -6.68 -7.35 -3.99 5350(MHz) -0.65 -0.59 1.90 -7.16 -7.00 -4.07 5470(MHz) -0.62 -0.08 2.36 -6.95 -6.35 -3.63 5600(MHz) -0.85 -1.74 1.53 -7.66 -7.82 -4.73 5725(MHz) -1.13 -0.87 1.70 -7.76 -7.45 -4.60 5785(MHz) -1.39 -1.50 1.43 -7.14 -7.03 -4.08 5850(MHz) -1.86 -1.96 0.92 -8.27 -7.44 -4.82 25

MIMO Antenna Gain Max Value (dBi) Average (dBi) Frequency H-pol V-pol Total H-pol V-pol Total 2400(MHz) -4.50 -1.51 -0.76 -10.03 -6.38 -4.82 2450(MHz) -3.86 -2.03 -1.06 -9.97 -6.23 -4.70 2500(MHz) -2.64 -0.35 0.61 -8.87 -5.47 -3.84 5150(MHz) -2.06 -2.68 -0.30 -6.92 -7.61 -4.24 5250(MHz) -2.90 -2.39 -0.21 -7.66 -7.73 -4.68 5350(MHz) -3.85 -2.07 -0.56 -7.81 -8.06 -4.92 5470(MHz) -3.50 -0.48 -0.19 -8.17 -7.19 -4.64 5600(MHz) -2.70 -2.26 -0.44 -8.67 -7.20 -4.86 5725(MHz) -2.51 -1.50 -0.21 -9.19 -7.35 -5.16 5785(MHz) -1.05 -2.40 -0.65 -9.44 -7.22 -5.18 5850(MHz) 0.13 -2.07 0.77 -9.48 -7.19 -4.85 26

4. Antenna Drawing Mylar Protective Tube Mini Pci Main Ant / Left / 725+/-3mm / Color Black / OD=1.13mm Aluminum Foil MIMO Ant / 580+/-3mm / Color Gray / OD=1.13mm Protective Tube Mylar Mini Pci Aluminum Foil 27

5. Reliability Data For Antenna Patch (Reference To IEC) IEC IEC 384-10/ 60068-2 TEST PROCEDURE REQUIREMENTS CECC 32 100 TEST CLAUSE METHOD -40 °C (30 No visible damage Rapid change minutes) to +90 Central Freq. 4.12 4(Na) of °C (30 minutes); Change temperature 5 cycles ± 6% No visible damage 500 ± 12 hours 2 hours recovery at 40 °C; 4.14 3(Ca) Damp heat Central Freq. 90 to 95 % RH Change ± 6% No visible damage 500 ± 12 hours 2 hours recovery 4.15 Endurance at 90 °C; Central Freq. Change ± 6% 28

6. Ordering Information: Yageo Ordering P/N Code The antennas may be ordered by using the Yageo P/N ordering code. These code numbers can be determined by the following rules: CAN4313 7 94 01 250 1B F C MS T A P F. Family Code CAN43 = Antenna C. Packing Type Code 13 = Bulk (1000 pcs) M. Materials Code 7 = High Frequency Material S. Size/Series Code 94 = 40.0*8.0*0.4mm Main / Aux / MIMO Antenna T. Tolerance/Cable 01 = Main Antenna, Left, Black; Aux Antenna, Right, White; MIMO Antenna, Left Side, Gray A. Working Frequency 250 = 2.45/5 GHz Dual Band P. Packing 1B = 1000 pcs packing 29

7. Revision Control Revision Date Content Remark R01 Aug. 14, 2008 New Issued, Metal Antenna N/A. 30


Document Created: 2008-12-04 13:49:17
Document Modified: 2008-12-04 13:49:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC