RF exposure Info 5 of 6

FCC ID: PPD-AR5B22

RF Exposure Info

Download: PDF
FCCID_2143833

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client Auden Certificate No: D5GHzV2—1040_Jul13 CALIBRATION CERTIFICATE Object D5GHzV2 — SN: 1040 Calibration procedure(s) QA CAL—22.v2 Calibration procedure for dipole validation kits between 3—6 GHz Calibration date: July 02, 2013 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 O1—Nov—12 (No. 217—01640) Oct—18 Power sensor HP 8481A US37202783 O1—Nov—12 (No. 217—01640) Oct—13 Reference 20 dB Attenuator SN: 5058 (20k) 04—Apr—13 (No. 217—01736) Apr—14 Type—N mismatch combination SN: 5047.3 / 06827 04—Apr—13 (No. 217—01739) Apr—14 Reference Probe EX3DV4 SN: 3503 28—Dec—12 (No. EX3—3503_Dec12) Dec—13 DAE4 SN: 601 25—Apr—13 (No. DAE4—601_Apr18) Apr—14 Secondary Standards ID # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—O0ct—02 (in house check Oct—11) In house check: Oct—13 RF generator R&S SMT—06 100005 04—Aug—99 (in house check Oct—11) In house check: Oct—13 Network Analyzer HP 8753E US37390585 $4206 18—O0ct—01 (in house check Oct—12) In house check: Oct—13 Name Function Signature Calibrated by: Israe El—Naouq Laboratory Technician Oma/ E-Qouw{ ie Approved by: KatJa Pokovie Technical Manager Issued: July 2, 2013 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D5GHzV2—1040_Jul13 Page 1 of 15

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x.y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEC 62209—2, "Evaluation of Human Exposure to Radio Frequency Fields from Handheld and Body—Mounted Wireless Communication Devices in the Frequency Range of 30 MHz to 6 GHz: Human models, Instrumentation, and Procedures"; Part 2: "Procedure to determine the Specific Absorption Rate (SAR) for including accessories and multiple transmitters", March 2010 b) Federal Communications Commission Office of Engineering & Technology (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: c) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle!l to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D5GHzV2—1040_Jul13 Page 2 of 15

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.8.7 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy = 4.0 mm, dz =1.4 mm Graded Ratio = 1.4 (Z direction) 5200 MHz + 1 MHz 5300 MHz + 1 MHz Frequency 5600 MHz + 1 MHz 5800 MHz + 1 MHz Head TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 36.0 4.66 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 36.0 + 6 % 4.47 mho/m + 6 % Head TSL temperature change during test x0.5 °C ~—— SAR result with Head TSL at 5200 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 7.86 Wikg SAR for nominal Head TSL parameters normalized to 1W 78.5 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.24 Wikg SAR for nominal Head TSL parameters normalized to 1W 22.4 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1040_Jul13 Page 3 of 15

Head TSL parameters at 5300 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.9 4.76 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 35.9 + 6 % 4.57 mho/m + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL at 5300 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.21 W/kg SAR for nominal Head TSL parameters normalized to 1W 82.0 W / kg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.35 W/kg SAR for nominal Head TSL parameters normalized to 1W 23.5 Wikg * 19.5 % (k=2) Head TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.5 5.07 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 35.5 +6 % 4.86 mho/m + 6 % Head TSL temperature change during test x0.5°C se SAR result with Head TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 8.19 W/kg SAR for nominal Head TSL parameters normalized to 1W 81.7 Wikg x 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.33 W/kg SAR for nominal Head TSL parameters normalized to 1W 23.3 Wikg * 19.5 % (k=2) Certificate No: D5GHzV2—1040_Jul13 Page 4 of 15

Head TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.3 5.27 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 35.2 + 6 % 5.07 mho/m + 6 % Head TSL temperature change during test x 0.5°C ues ges SAR result with Head TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 7.79 Wikg SAR for nominal Head TSL parameters normalized to 1W 77.7 Wikg 2 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.21 Wikg SAR for nominal Head TSL parameters normalized to 1W 22.1 Wikg + 19.5 % (k=2) Certificate No: D5GHzV2—1040_Jul13 Page 5 of 15

Body TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0°C 49.0 5.30 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 49.3 +6 % 5.46 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5200 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.47 Wikg SAR for nominal Body TSL parameters normalized to 1W 74.8 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.09 W/kg SAR for nominal Body TSL parameters normalized to 1W 21.0 W/kg + 19.5 % (k=2) Body TSL parameters at 5300 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.9 5.42 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 49.1 +6 % 5.58 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5300 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 7.65 W/kg SAR for nominal Body TSL parameters normalized to 1W 76.6 Wikg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.14 Wikg SAR for nominal Body TSL parameters normalized to 1W 21.5 Wikg £ 19.5 %(k=2) Certificate No: D5GHzV2—1040_Jul13 Page 6 of 15

Body TSL parameters at 5600 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.5 5.77 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 48.6 + 6 % 5.99 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5600 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 8.10 W/kg SAR for nominal Body TSL parameters normalized to 1W 81.2 W/kg + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.24 Wikg SAR for nominal Body TSL parameters normalized to 1W 22.4 Wikg + 19.5 % (k=2) Body TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.2 6.00 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 48.3 +6 % 6.28 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 100 mW input power 746 W/kg SAR for nominal Body TSL parameters normalized to 1W 74.8 Wikg £ 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.06 Wikg SAR for nominal Body TSL parameters normalized to 1W 20.6 Wikg * 19.5 % (k=2) Certificate No: D5GHzV2—1040_Jul13 Page 7 of 15

Appendix Antenna Parameters with Head TSL at 5200 MHz Impedance, transformed to feed point 48.8 Q — 6.8 jQ Return Loss —23.1 dB Antenna Parameters with Head TSL at 5300 MHz Impedance, transformed to feed point 48.5 Q — 3.4 jQ Return Loss — 28.4 dB Antenna Parameters with Head TSL at 5600 MHz Impedance, transformed to feed point 55.7 Q — 3.9 jQ Return Loss —23.7 dB Antenna Parameters with Head TSL at 5800 MHz Impedance, transformed to feed point 54.8 Q — 2.0 jQ Return Loss —26.1 dB Antenna Parameters with Body TSL at 5200 MHz Impedance, transformed to feed point 48.7 Q — 5.7 jQ Return Loss — 24.6 dB Antenna Parameters with Body TSL at 5300 MHz Impedance, transformed to feed point 48.4 Q — 2.5 jQ Return Loss — 30.4 dB Antenna Parameters with Body TSL at 5600 MHz Impedance, transformed to feed point 56.3 Q — 2.5 jQ Return Loss —23.9 dB Antenna Parameters with Body TSL at 5800 MHz Impedance, transformed to feed point 55.0 Q — 1.2 jQ Return Loss —26.2 dB Certificate No: D5GHzV2—1040_Jul13 Page 8 of 15

General Antenna Parameters and Design Electrical Delay (one direction) 1.202 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxia! cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in orderto improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on December 30, 2005 Certificate No: D5GHzV2—1040_Jul13 Page 9 of 15

DASY5 Validation Report for Head TSL Date: 02.07.2013 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 5GHz; Type: D5GHzV2; Serial: D5SGHzV2 — SN: 1040 Communication System: UID 0 — CW ; Frequency: 5200 MHz, Frequency: 5300 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: f = 5200 MHz; 0 = 4.47 S/m; & = 36; p = 1000 kg/m3 , Medium parameters used: f = 5300 MHz; 0 = 4.57 S/m; &, = 35.9; p = 1000 kg/m3 , Medium parameters used: £ = 5600 MHz; 0 = 4.86 $/m; & = 35.5; p = 1000 kg/m* , Medium parameters used: £ = 5800 MHz; 0 = 5.07 $/m; & = 35.2; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASYS5 (IEEE/IEC/ANSI €C63.19—2007) DASY52 Configuration: e Probe: EX3DV4 — SN3503; ConvF(5.41, 5.41, 5.41); Calibrated: 28.12.2012, ConvF(5.1, 5.1, 5.1); Calibrated: 28.12.2012, ConvF(4.76, 4.76, 4.76); Calibrated: 28.12.2012, ConvF(4.81, 4.81, 4.81); Calibrated: 28.12.2012; e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 25.04.2013 * Phantom: Flat Phantom 5.0 (front); Type: QDOOOP50AA; Serial: 1001 e DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 64.803 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 28.9 W/kg SAR(1 g) = 7.86 W/kg; SAR(10 g) = 2.24 W/kg Maximum value of SAR (measured) = 17.7 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5300 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 65.656 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 30.7 W/kg SAR(1 g) = 8.21 W/kg; SAR(10 g) = 2.35 W/kg Maximum value of SAR (measured) = 18.7 W/kg Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 64.415 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 32.4 W/kg SAR(I g) = 8.19 W/kg; SAR(10 g) = 2.33 W/kg Maximum value of SAR (measured) = 19.1 W/kg Certificate No: DSGHzV2—1040_Jul13 Page 10 of 15

Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 61.555 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 32.3 W/kg SAR(I g) =7.79 W/kg; SAR(10 g) = 2.21 W/kg Maximum value of SAR (measured) = 18.5 W/kg —6.00 ~12.00 18.00 24.00 —30.00 0 dB = 18.5 W/kg = 12.67 dBW/kg Certificate No: D5GHzV2—1040_Jul13 Page 11 of 15

Impedance Measurement Plot for Head TSL 2 Jul 2013 14:42:06 CHI) sii i U FS 1: 48.793 a —6.8496 n 4.4684 pF 5 200.000 000 MHz oc o. < ' \' xz ~ * +{ "~a&% i Eow\ CH1 Markers & "a~" 248.463 a ~3.4375 a Cor 5.30000 GHz 41 54.789 a & ~2,0059 a 3 5.90000 GHz 16 H1d CH2 CH2 Markers Cor 2:—29,396 dB 5.30000 GHz #—23.7 21 dB 5.G0000 GHz 4:—26.099 dB fvg 5.90000 GHz 16 H1d START 5 000.000 @00 MHz STOP 6 000.000 000 MHz Certificate No: D5GHzV2—1040_Jul13 Page 12 of 15

DASY5 Validation Report for Body TSL Date: 01.07.2013 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 5GHz; Type: D5GHzV2; Serial: D5SGHzV2 — SN: 1040 Communication System: UID 0 — CW ; Frequency: 5200 MHz, Frequency: 5300 MHz, Frequency: 5600 MHz, Frequency: 5800 MHz Medium parameters used: £ = 5200 MHz; 0 = 5.46 S/m; &, = 49.3; p = 1000 kg/m3 , Medium parameters used: £ = 5300 MHz; 0 = 5.58 S/m; &, = 49.1; p = 1000 kg/m" , Medium parameters used: f = 5600 MHz; 0 = 5.99 S/m; &, = 48.6; p = 1000 kg/m3 , Medium parameters used: £ = 5800 MHz; 0 = 6.28 S/m; & = 48.3; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS3 (IEEE/IEC/ANSI C63.19—2007) DASY52 Configuration: e Probe: EX3DV4 — SN3503; ConvF(4.91, 4.91, 4.91); Calibrated: 28.12.2012, ConvF(4.67, 4.67, 4.67); Calibrated: 28.12.2012, ConvF(4.22, 4.22, 4.22); Calibrated: 28.12.2012, ConvF(4.38, 4.38, 4.38); Calibrated: 28.12.2012; e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 25.04.2013 e Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002 e DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164) Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 58.836 V/m; Power Drift =—0.01 dB Peak SAR (extrapolated) = 29.5 W/kg SAR(I g) =7.47 W/kg; SAR(10 g) = 2.09 W/kg Maximum value of SAR (measured) = 17.3 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5300 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 58.767 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 31.0 W/kg SAR(I g) =7.65 W/kg; SAR(10 g) = 2.14 W/kg Maximum value of SAR (measured) = 18.1 W/kg Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5600 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 58.538 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 35.9 W/kg SAR(1 g) = 8.1 W/kg; SAR(10 g) = 2.24 W/kg Maximum value of SAR (measured) = 19.6 W/kg Certificate No: D5GHzV2—1040_Jul13 Page 13 of 15

Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 55.408 V/m; Power Drift = —0.02 dB Peak SAR (extrapolated) = 35.1 W/kg SAR(1 g) = 7.46 W/kg; SAR(10 g) = 2.06 W/kg Maximum value of SAR (measured) = 18.5 W/kg —6.00 12.00 —18.00 —24.00 —30.00 0 dB = 18.5 W/kg = 12.67 dBW/kg Certificate No: D5GHzV2—1040_Jul13 Page 14 of 15

Impedance Measurement Plot for Body TSL 1 Jul 2013 14:41:24 CHZ sii 4 uors 1:148.701 a —§.6916e 5.3870 pF 5 200.000 000 MHz Eoo _Tx, * CH1 Markers Pei 2: 48.422 a Cor —2.5215 a 5.30000 GHz 3: 56,299 a ~2.9215 a 5.60000 GHz fvg 16 amesss ~4. 5.80000 GHz A H1d CH2 CH2 Markers Cor :—30.405 dB 5.30000 GHz 3:—23.902 dB 5.60000 GHz 4:~26.165 dB fvg 5.90000 GHz 16 H1d START 5 000.000 000 MHz STOP 6 000.000 000 MHz Certificate No: D5GHzV2—1040_Jul13 Page 15 of 15


Document Created: 2013-12-11 23:59:53
Document Modified: 2013-12-11 23:59:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC