SAR test report 2 of 5

FCC ID: PPD-AR5B125

RF Exposure Info

Download: PDF
FCCID_1428157

Date/Time: 3/1/2011 9:55:36 AM Test Laboratory: Compliance Certification Services (UL CCS) System Performance Check - D2450V2 DUT: Dipole ; Type: D2450V2; Serial: 706 Communication System: System Check Signal - CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; εr = 51.9; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3749; ConvF(6.9, 6.9, 6.9); Calibrated: 12/13/2010 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 7/21/2010 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=100mW/Area Scan (6x6x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 5.44 mW/g d=10mm, Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 59.0 V/m; Power Drift = -0.049 dB Peak SAR (extrapolated) = 11.1 W/kg SAR(1 g) = 5.12 mW/g; SAR(10 g) = 2.31 mW/g Maximum value of SAR (measured) = 6.76 mW/g 0 dB = 6.76mW/g

Date/Time: 3/1/2011 10:10:20 AM Test Laboratory: Compliance Certification Services (UL CCS) System Performance Check - D2450V2 DUT: Dipole ; Type: D2450V2; Serial: 706 Communication System: System Check Signal - CW; Frequency: 2450 MHz;Duty Cycle: 1:1 d=10mm, Pin=100mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 6.72 mW/g


Document Created: 2011-03-02 00:26:28
Document Modified: 2011-03-02 00:26:28
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC