Test Report

FCC ID: PODTH-9800

Test Report

Download: PDF
FCCID_2322758

Report No.: AGC01039140401FE08 Page 1 of 27 FCC Test Report Report No.: AGC01039140401FE08 FCC ID PODTH‐9800 TYPE OF AUTHORIZATION : Certification APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Mobile radio BRAND NAME : TYT MODEL NAME : TH‐9800,TH‐9800D,TH‐7800,TH‐7900 CLIENT : TYT ELECTRONICS CO., LTD DATE OF ISSUE : May 16, 2014 STANDARD(S) : FCC Part 15 Rules REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context.

Report No.: AGC01039140401FE08 Page 2 of 27 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / May 16, 2014 Valid Original Report

Report No.: AGC01039140401FE08 Page 3 of 27 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE ............................................................................................................... 4 2. PRODUCT INFORMATION ........................................................................................................................... 5 3. TEST FACILITY ............................................................................................................................................. 6 4. SUPPORT EQUIPMENT LIST ....................................................................................................................... 7 5. SYSTEM DESCRIPTION ............................................................................................................................... 7 6 SUMMARY OF TEST RESULTS .................................................................................................................... 8 7. FCC RADIATED EMISSION TEST ................................................................................................................ 9 7.1. TEST EQUIPMENT OF RADIATED EMISSION .....................................................................9 7.2. LIMITS OF RADIATED EMISSION TEST ................................................................................9 7.3 BLOCK DIAGRAM OF RADIATED EMISSION TEST ............................................................9 7.4 PROCEDURE OF RADIATED EMISSION TEST ...................................................................10 7.5 TEST RESULT OF RADIATED EMISSION TEST .................................................................11 7.6 ANTENNA CONDUCTED POWER FOR RECEIVERS .................................................. 15 APPENDIX 2 .................................................................................................................................................... 19 PHOTOGRAPHS OF EUT ............................................................................................................................... 19

Report No.: AGC01039140401FE08 Page 4 of 27 1. VERIFICATION OF COMPLIANCE Applicant TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry base, Nan’an, quanzhou, Address Fujian Manufacturer TYT ELECTRONICS CO., LTD Block 39-1, Optoelectronics-information industry base, Nan’an, quanzhou, Address Fujian Product Designation Mobile radio Brand name: TYT Test Model TH-9800 Series model TH-9800D,TH-7800,TH-7900 Difference description All the same except the modle name and appearance. Date of test: May 12, 2014 to May 15, 2014 Deviation: None Condition of Test Sample Normal The above equipment was tested by Attestation Of Global Compliance Co., Ltd. for compliance with the requirements set forth in the FCC Rules and Regulations Part 15, the measurement procedure according to ANSI C63.4:2003. This said equipment in the configuration described in this report shows the maximum emission levels emanating from equipment are within the compliance requirements. The test results of this report relate only to the tested sample identified in this report. Prepared By Freddie Duan May 16, 2014 Checked By Kidd Yang May 16, 2014 Authorized By Solger Zhang May 16, 2014

Report No.: AGC01039140401FE08 Page 5 of 27 2. PRODUCT INFORMATION The EUT is a Mobile radio designed for voice communication. It is designed by way of utilizing the FM modulation achieves the system operating. A major technical description of EUT is described as following: Communication Type Voice / Tone only Modulation FM RX Frequency Range 28-29.7MHz/50-54MHz/144-148MHz/420-450MHz Emission Type 11KфF3E Antenna Designation Detachable Power Supply DC 13.8V by DC Source Adapter Parameter N/A I/O Port Information ( Applicable Not Applicable) I/O Port of EUT I/O Port Type Q’TY Cable Tested with DC Input Port 1 1.5m, Unshielded 1 Antenna Connect Port 1 0 1 USB Port 1 0 1 External Speaker connect Port 1 0 1

Report No.: AGC01039140401FE08 Page 6 of 27 3. TEST FACILITY Facility Attestation of Global Compliance (Shenzhen) Co., Ltd B112-B113, Building 12, Baoan Building Materials Center, No.1 of Xixiang Inner Ring Location: Road, Baoan District, Shenzhen, Guangdong, P.R.China The test site is constructed and calibrated to meet the FCC requirements in Description: documents ANSI C63.4:2003. Site Filing: The FCC Registration Number is 259865 All measuring equipment is in accord with ANSI C63.4 requirements that meet Instrument Tolerance: industry regulatory agency and accreditation agency requirement.

Report No.: AGC01039140401FE08 Page 7 of 27 4. SUPPORT EQUIPMENT LIST Device Type Manufacturer Model Name Serial No. Data Cable Power Cable DC source Yidangfeng PS-305D N/A N/A N/A 5. SYSTEM DESCRIPTION EUT test procedure: 1. Connect EUT and peripheral devices. 2. Power on the EUT, the EUT begins to work. 3. Running data transmission and make sure the EUT normal working. EMC TEST MODES No. TEST MODES 1 Scanning mode + Receiving mode Note: Only the result of the worst case was recorded in the report.

Report No.: AGC01039140401FE08 Page 8 of 27 6 SUMMARY OF TEST RESULTS FCC Rules Description Of Test Result §15.107 Conduction Emission N/A §15.109 Radiated Emission Compliant §15.111 Antenna Conducted Power for receivers Compliant Scanning receivers and frequency converters used §15.121 with scanning receivers. Compliant

Report No.: AGC01039140401FE08 Page 9 of 27 7. FCC RADIATED EMISSION TEST 7.1. TEST EQUIPMENT OF RADIATED EMISSION Description Manufacturer Model Identifier Cal. Date Cal. Due PSA SERIES AGILENT E4440A US41421290 07/18/2013 07/17/2014 SPECTRUM ANALYZER ANTENNA A.H. SAS-521-4 26 07/18/2013 07/17/2014 HORN ANTENNA EM EM-AH-10180 67 04/19/2014 04/18/2015 AMPLIFIER EM EM30180 0607030 07/18/2013 07/17/2014 POSITIONING MF MF-7802 MF780208147 07/18/2013 07/17/2014 CONTROLLER 7.2. LIMITS OF RADIATED EMISSION TEST Frequency Distance Maximum Field Strength Limit (MHz) (m) (dBuV/m/ Q.P.) 30~88 3 40.0 88~216 3 43.5 216~960 3 46.0 Above 960 3 54.0 **Note: The lower limit shall apply at the transition frequency. 7.3 BLOCK DIAGRAM OF RADIATED EMISSION TEST 1-4m EUT 3m Amplifier 0.8 m Spectrum Analyzer

Report No.: AGC01039140401FE08 Page 10 of 27 7.4 PROCEDURE OF RADIATED EMISSION TEST 1) The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden turntable with a height of 0.8 meters is used which is placed on the ground plane as per ANSI C63.4 (see Test Facility for the dimensions of the ground plane used). When the EUT is floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2) Support equipment, if needed, was placed as per ANSI C63.4. 3) All I/O cables were positioned to simulate typical actual usage as per ANSI C63.4. 4) The EUT received DC 13.8V by DC source. All support equipments received AC 120V/60Hz power from socket under the turntable, if any. 5) The antenna was placed at 3 meter away from the EUT as stated in FCC Part 15. The antenna connected to the Analyzer via a cable and at times a pre-amplifier would be used. 6) The Analyzer / Receiver quickly scanned from 30MHz to 1000MHz. The EUT test program was started. Emissions were scanned and measured rotating the EUT to 360 degrees and positioning the antenna 1 to 4 meters above the ground plane, in both the vertical and the horizontal polarization, to maximize the emission reading level. 7) The test mode(s) were scanned during the test: 8) Recorded at least the six highest emissions. Emission frequency, amplitude, antenna position, polarization and turntable position were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit and Q.P./Peak reading is presented. The test data of the worst case condition(mode 1) was reported on the following Data page

Report No.: AGC01039140401FE08 Page 11 of 27 7.5 TEST RESULT OF RADIATED EMISSION TEST Radiated Emission Test –Horizontal -3m Below 1G

Report No.: AGC01039140401FE08 Page 12 of 27 Radiated Emission Test –Vertical -3m Below 1G

Report No.: AGC01039140401FE08 Page 13 of 27 Radiated Emission Test –Horizontal -3m Above 1G

Report No.: AGC01039140401FE08 Page 14 of 27 Radiated Emission Test –Vertical -3m Above 1G

Report No.: AGC01039140401FE08 Page 15 of 27 7.6 ANTENNA CONDUCTED POWER FOR RECEIVERS LIMIT The antnna conducted power of the receiver as defined in §15.111 shall not exceed the values given in the following tables Frequency Range 9 KHz to 2GHz Limit 2.0 nW (-57 dBm ) MEASUREMENT EQUIPMENT USED Name of Equipment Manufacturer Model Serial Number Calibration Due EXA Signal Analyzer Aglient N9010A MY53470504 03/28/2014 Remark: Each piece of equipment is scheduled for calibration once a year. TEST CONFIGURATION EUT Spectrum Analyzer TEST PROCEDURE 1. The receiver antenna terminal connected to to a spectrum analyzer. 2. The test data of the worst case condition(mode 1) was reported on the following Data page.

Report No.: AGC01039140401FE08 Page 16 of 27 TEST RESULTS Conducted Measurement (9 KHz to 150KHz) Conducted Measurement (150KHz to 30MHz)

Report No.: AGC01039140401FE08 Page 17 of 27 Conducted Measurement (30MHz to 1GHz) Conducted Measurement (1GHz to 2GHz) PASS

Report No.: AGC01039140401FE08 Page 18 of 27 APPENDIX 1 PHOTOGRAPHS OF TEST SETUP FCC RADIATED EMISSION TEST SETUP

Report No.: AGC01039140401FE08 Page 19 of 27 APPENDIX 2 PHOTOGRAPHS OF EUT TOTAL VIEW OF EUT TOP VIEW OF EUT

Report No.: AGC01039140401FE08 Page 20 of 27 BOTTOM VIEW OF EUT FRONT VIEW OF EUT

Report No.: AGC01039140401FE08 Page 21 of 27 BACK VIEW OF EUT LEFT VIEW OF EUT

Report No.: AGC01039140401FE08 Page 22 of 27 RIGHT VIEW OF EUT OPEN VIEW OF EUT-1

Report No.: AGC01039140401FE08 Page 23 of 27 OPEN VIEW OF EUT-2 OPEN VIEW OF EUT-3

Report No.: AGC01039140401FE08 Page 24 of 27 INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2

Report No.: AGC01039140401FE08 Page 25 of 27 INTERNAL VIEW OF EUT-3 INTERNAL VIEW OF EUT-4

Report No.: AGC01039140401FE08 Page 26 of 27 INTERNAL VIEW OF EUT-5 OPEN VIEW OF EUT (microphone)

Report No.: AGC01039140401FE08 Page 27 of 27 INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2 ----END OF REPORT----


Document Created: 2014-07-07 09:11:29
Document Modified: 2014-07-07 09:11:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC