User Manual

FCC ID: PODGMRS-25

Users Manual

Download: PDF
FCCID_4411597

Owners Manual





















DTMF operation 1) "OFF7, users can input the desired DTMF code directly DTMF decoding (In programming software} °7 DTMF MENU 1. Select the DTMF encode type Dtnf Encode r oniemews — o Yo. Type Code ruf ow but nasine 1 orP 123456789 put spaite) (® Tiew mt i 2) *ANF*, users only should Input the call ID, which is called radlo ID har o tinte GG gime in TT Specical Call —— n ox% uits mtc e C # manny. @09 n i mss m n na naou soemmne in o camme ]

3) "Message", users should input the call ID firstly which is called radio ID, and then input DTMF setting the Message. Stun code: when theradio receives the corresponding DTMF code, the radio will be remote Note: Because DTMF does a long time for message, this function only supports simple stunned and disabled trangmit. message function. Kill code: when the radlo receives the corresponding DTMF code, the radlo will be remote killed and disabled receive and transmit. | m Specical Ca o Select Ch: The defautt channel when the DTME is calling DTMF operating: When the signaling of channel selects the DTME, the current channel will automatically xo B check if the DTMF signaling is received and decoding it. And achieve a corrasponding cadl type Bendies function according to the received code. The function including: Turn on the squelch, ANI display, message, remote stun, and remote kill call TD Note: when the radlo is remote stunned or klled, It can be released by programming. Nessage 123 Enter Cancel


RF exposure warning : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 79.9 cm between the radiator & body For a transmitter that can only be operated with an FCC license, warnings concerning compliance with applicable licensing requirements and information concerning license application procedures.

FCC Warnings and Statements IMPORTANT! IMPORTANT NOTICE, FCC LICENSE REQUIRED FOR GMRS OPERATION (Only Applicable for GMRS Radio Use in the United States) &KDQJHV RU PRGL¿FDWLRQV WR WKLV XQLW QRW H[SUHVVO\ DSSURYHG E\ The radios operate on GMRS (General Mobile Radio Service) frequencies which require MIDLAND RADIO CORPORATION could void your right to operate this an FCC (Federal Communications Commission) license. You must be licensed prior to unit. Your radio is set up to transmit a regulated signal on an assigned operating on channels 1 - 23, which comprise the GMRS channels of the radio. frequency. It is against the law to alter or adjust the settings inside the Serious penalties could result from unlicensed use of GMRS channels, in viola-tion of FCC rules, as stipulated in the Communications Acts Sections 501 and 502 COMMUNICATOR to exceed those limitations. Any adjustment to your (amended). UDGLRPXVWEHPDGHE\TXDOL¿HGWHFKQLFLDQV You will be issued a call sign by the FCC which should be used for station identification when operating the radio on GMRS channels. You should also cooperate by engaging in permissible transmissions only, avoiding channel interference with other GMRS users, and being prudent with the length of your transmission time. To obtain a license or ask questions about the license application, contact the FCC at 1-888-CALL FCC or go to the FCC's website: http://www.fcc.gov and request form 605.


Document Created: 2019-08-21 09:43:02
Document Modified: 2019-08-21 09:43:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC