user manual II

FCC ID: POD-MDUV380

Users Manual

Download: PDF
FCCID_4041460

























— — — — —®e — — — — aull siy} yim Buoje Indo @Se@Id — — — — — — — — — — Use the DMR Digital Transceiver in the environment with the temperature between—10°C and 40°C, Guarantee otherwise, it may damage your DMR Digital Transceiver. It can be operating under 2000m. Model Number: Hereby, (TYT Electronics Co.,Ltd) declare that the radio equipment type (DMR Digital Transceiver) is compliance with Directive 2014/53/EU. Serial Number: C€ Purchasing Date: Dealer: Telephone: User‘s Name: Telephone: Operation Frequency: 136—174 & 400—480MHz IT NL IE Max. Output Power: 5WAM1W Address: Post Code: AC ADAPTER: MD—UV380 /MD—UV390 , Input: 100—240V~ 50/60Hz, 0.6A; output: 12V 0.5A Remarks: Antenna Gain:1.50Bi 1 This guarantee card to be kept by the user, no replenishment if lost. Test position and configuration Head SAR was performed with the device configured in the positions 2 This guarantee card to be filled & chopped by the dealer, or it is invalid. according to EN 62209—2:2010, and face up SAR was performed with the device 25mm from the 3 Don‘t alter the guarantee card, please coufirm the serial number on the guarantee card is same as phantom. Body SAR was also performed with the headset and beilt clip attached and without Omm from the ph antom. that on the machine. Caution: 4 One—year guarantee, charger, battery, ear—phone, antenna and cable are not under guarantee. For Adapter: Shall be installed near the equipment and shall be easily accessible. 5 The user can get repairing service from the followingways: For Battery: Risk of explosion battery is replaced by an incorrect type, dispose of *« Go to the shop where you buy the machine. used batteries according to the instructions. * Our local repairing agents. *« Send back to our company.

EU Declaration of Conformity AC ADAPTER: (MD—UV390) TYT Electronies Co., Ltd, MD—UV390, Input: 100—240V~ 50/60Hz, 0.6A, output: 12V==20.5A (MD—UV380& MD—UV380G)TYT Electronics Co., Ltd, MD—UV380, Input: 100—240V~ 50/60Hz, We, hereby declare that the essential requirements set out in the RED Directive 2014/53/EU, have been fully fulfilled on our product with indication as below: 0.6A; output: 12V—:0.5A Product Name DMR Digital Transceiver Battery: (MD—UV390) TYT Electronics Co., Ltd, MD—390, 7.4V, 2200mAh Brand Name / Model TYT/ MD—UV380, MD—UV380G MD—UV390 (MD—UV380& MD—UV380G)TYT Electronics Co., Ltd, MD—380, 7.4V, 2000mAh Antena: Detachable , Gain 1.5dBi The following standards have been applied for the investigation of compliance: Charger: (MD—UV390)TYT Electronics Co.,Ltd, Model name: CH390 _, INPUT: DC 12V 0.5A, K Safety EN 60950—1:2006+A11:2009+A1:2010+A12:2011+42:2013 OUTPUT: DC 8.4V, 0.5A; [X Health EN 62209—2:2010; EN50566:2017 EMC EN 301 489—1 V2.2.0 (draft) (MD—UV380& MD—UV380G)TYT Electronics Co.,Ltd, Model name: CH380 , INPUT: DC 12V 0.5A, EN 301 489—5 V 2.2.0 (draft) OUTPUT: DC 8.4V, 0.5A ETSL EN 300 086 V 2.1.2 . ETSI EN 300 219 V 2.1.1 Manufacturer Information; m Radio EN 300 113 V2.2.1 Company TYT Electronics Co..Ltd Address Block 39—1,Optoelectronics—information industry base, Nan‘an, Quanzhou, Notified Body number 0700 PHOENIX TESTLAB GmbH Fujian, China Furthermore, the ISO requirement for the in—process quality control procedure as well as the Name/Title Sophia Wong E—mail tyt@tyt888.com manufacturing process has been reached. The technical document as well as the test reports will be kept for a period at least 10 years after the last product has been manufactured at the disposal of the Tel. No. +86—15259596756 Fax No. relevant national authorities of any Member State for inspection. Detail contact information for this declaration has been listed below as the window of any issues relevant for this declaration. Hardware Version: UV—V2.1—171109 Software Version: V1.06 Signature / stamp Date:

SAFETY TRAINING INFORMATION Electromagnetic Interference/Compatibility During transmissions, TYT Electronics Co., Ltd. radio generates RF energy that can our TYT Electronics Co., Ltd. radio generators RF electromagnetic possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in during transmit mode.This radio is designed for and classified as"Occupational Use Only", areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to meaning it must be used only during the course of employment by individuals aware of the electromagnetic radiation such as hospitals, aircraft, and blasting sites. hazards,and the ways To Minimize Such hazards. This radio is NOT intended for use by the"General Population" in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for Occupational/Controlled Use "Occupational Use Only".Inaddition, our TYT Electronics Co., Ltd radio complies with the. The radio transmitter is used in situations in which persons are exposed as consequence of their employment following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. of such levels for exposure to humans: --IEEE Std. 1528:2013 and KDB447498, Evaluating Compliance with FCC Guidelines for Human Attention: Exposure to Radio Frequency Electromagnetic Fields. This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure --American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. appropriate warning lable is affixed to all units. In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be maintained when held-to-face, and body-worn operations are restricted to the approved --American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement original acessories (belt clip). Do not use this device when antenna shows obvious damages of Potentially Hazardous Electromagnetic Fields- RF and Microwave. This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for(Model:MD-UV380 &MD-UV380G FCC ID: The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to asÿsure that this radio operates with the FCC RF POD-MDUV380 ) (Model:MD-UV390 FCC ID: POD-MDUV390) to gain further information include SAR Values. exposure limits of this radio.


Document Created: 2018-07-26 20:21:33
Document Modified: 2018-07-26 20:21:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC