MPE

FCC ID: PODGMRS-45

RF Exposure Info

Download: PDF

FCCID_4421397

2. TECHNICAL INFORMATION

A major technical description of EUT is described as following:
Operation Frequency GMRS: 462.5625MHz -462.7125MHz(5W)
462.5500MHz -462.7250MHz(45W)
467.5500MHz -467.7250MHz(45W)
Modulation FM
Antenna Designation Detachable
Antenna type External antenna
Output power 5W/45W
Antenna gain 0dBi
Power Supply DC 13.8V

Channel List:

CH. No CH. Freq Power CH. No CH. Freq Power
1 462.5625 13 462.6750
2 462.5875 14 462.7000 45W
3 462.6125 15 462.7250
4 462.6375 5W 16 467.5500
5 462.6625 17 467.5750
6 462.6875 18 467.6000
7 462.7125 19 467.6250
45W
8 462.5500 20 467.6500
9 462.5750 21 467.6750
10 462.6000 45W 22 467.7000
11 462.6250 23 467.7250
12 462.6500

3. RF EXPOSURE MEASUREMENT
3.1 INTRODUCTION
Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be
evaluated based on the MPE limits adopted by the FCC for electric and magnetic
field strength and/or power density, as appropriate, since exposures are assumed
to occur at distances of 20 cm or more from persons.

The 1992 ANSI/IEEE standard (See Listed limit table) specifies a minimum
separation distance of 20 cm for performing reliable field measurements to
determine adherence to MPE limits.
If the minimum separation distance between a transmitter and nearby persons
is more than 20 cm under normal operating conditions, compliance with MPE
limits may be determined at such distance from the transmitter. When applicable,
operation instructions and prominent warning labels may be used to alert the
exposed persons to maintain a specified distance from the transmitter or to limit
their exposure durations and usage conditions to ensure compliance.

3.2 FCC LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)
LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE
Frequency Magnetic Power Averaging
E-field Strength Time
Range Field Density
(E) (V/m) |E|2, |H|2
(MHz) Strength (S)
(mW/cm2) or S
(H)
(A/m) (Minutes)

0.3 -- 1.34 614 1.63 (100)* 30
1.34 -- 30 824/f 2.19/f (180/f2)* 30
30 -- 300 27.5 0.073 0.2 30
300 -- 1500 -- -- f/1500 30
1500 -- 100,000 -- -- 1.0 30

*Note:

1. f= Frequency in MHz * Plane-wave Equivalent Power Density
2.The averaging time for General Population/Uncontrolled exposure to fixed
transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091
and 2.1093 on source-based time-averaging requirement for mobile and portable
transmitters.

4. CLASSIFICATION OF THE ASSESSMENT METHODS

According to user manual, The antenna of the product, under normal use condition is

at least 107.3 cm away from the body of the user. Warning statement to the user for

keeping at least 107.3 cm separation distance and the prohibition of operating to a

person has been printed on the user’s manual. So, this product under normal use is

located on electromagnetic far field between the human body.
S=PG/4πR²
Where:
S=power density
P=power input to antenna

G=power gain of the antenna in the direction of interest relative to an isotropic radiator
R=distance to the center of radiation of the antenna

5. EUT OPERATION CONDITION

Make the EUT to transmit at channel 4 , channel 11 and channel 19 individually.

6. TEST RESULTS
Note: report the worst result in this part

Antenna Gain=0 dBi (Numeric 1), π=3.141, Duty cycle=50%

Frequency Output Output Correct Power Power Density Result
Power Power Power Density Limit

MHz dBm mW mW mW/cm2 mW/cm2 Pass/Fail

462.6250 46.49 44570 22285 0.3081 0.3084 Pass

Note:
1.The output power is refer to AGC02931190802FE10.
2.Correct Power=Output Power*Duty cycle.
3.According to the user manual, the minimum separate distance which used for MPE
calculate is 107.3cm.

Document Created: 2019-08-30 09:25:20
Document Modified: 2019-08-30 09:25:20

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC