user manual part1

FCC ID: POD-DMR2

Users Manual

Download: PDF
FCCID_3422041

SAFETY TRAINING INFORMATION Electromagnetic Interference/Compatibility During transmissions, TYT ELECTRONICS CO., LTD radio generates RF energy that can Our TYT ELECTRONICS CO., LTD radio generators RF electromagnetic possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in during transmit mode.This radio is designed for and classified as"Occupational Use Only", areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to meaning it must be used only during the course of employment by individuals aware of the electromagnetic radiation such as hospitals, aircraft, and blasting sites. hazards,and the ways To Minimize Such hazards. This radio is NOT intended for use by the"General Population" Occupational/Controlled Use in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for "Occupational Use Only".Inaddition, our TYT ELECTRONICS CO., LTD radio complies with the The radio transmitter is used in situations in which persons are exposed as consequence of their employment following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. of such levels for exposure to humans: Attention: --IEEE Std. 1528:2013 and KDB447498, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure --American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning lable is affixed to all units. In order to comply with RF exposure requirements, a minimum Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. distance of 2.5cm must be maintained when held-to-face, and body-worn operations are restricted to the approved --American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement original acessories (belt clip). Do not use this device when antenna shows obvious damages of Potentially Hazardous Electromagnetic Fields- RF and Microwave. This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID:POD-DMR2 to gain further The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to asÿsure that this radio operates with the FCC RF information include SAR Values. exposure limits of this radio.

SAFETY INFORMATION FOR USER The transceiver is excellently designed with advanced technology. Please observe the following precautions to perform your obligation, prevent personal injury and ensure the safety of transceiver usage. 1. Keep the transceiver and accessories away from children. 2. Please do not try to open or modify the transceiver without permission, non-professionals process may also cause damage. 3. Please use assorted battery and charger to avoid damage. 4. Please use assorted antenna to ensure the communication distance. 5. Please do not expose the transceiver to long period of direct sunlight, nor place it close to heat appliances. 6. Please do not put the transceiver in excessively dusty or humid areas. 7. Do not use harsh chemicals, cleaning solvents to clean the transceiver. 8. Do not transmit without antenna. 9. When using this transceiver, we recommend transmitting for 1 minute then receiving for 4 minutes. Continuous transmitting for long time or working in high power will heat the back of the transceiver. Do not place the transceiver’s hot back close to any surface of plastic. 10.If any abnormal odor or smoke detected coming from the transceiver, turn off the power and take off the battery pack and its case. Then contact local dealers. 11.We and our distributors will offer safety/RF exposure trainings to the users after purchasing the devices.

Frequency band: Dual time slot for repeater Welcome to use our two—way radio Professional FM Transceiver \_ Private call match (Promiscuous)













Document Created: 2017-06-02 14:04:35
Document Modified: 2017-06-02 14:04:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC