user manual

FCC ID: POD-DMR1

Users Manual

Download: PDF
FCCID_3599131

SAFETY TRAINING INFORMATION Electromagnetic Interference/Compatibility During transmissions, TYT ELECTRONICS CO., LTD radio generates RF energy that can Our TYT ELECTRONICS CO., LTD radio generators RF electromagnetic possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in during transmit mode.This radio is designed for and classified as"Occupational Use Only", areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to meaning it must be used only during the course of employment by individuals aware of the electromagnetic radiation such as hospitals, aircraft, and blasting sites. hazards,and the ways To Minimize Such hazards. This radio is NOT intended for use by the"General Population" Occupational/Controlled Use in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for "Occupational Use Only".Inaddition, our TYT ELECTRONICS CO., LTD radio complies with the The radio transmitter is used in situations in which persons are exposed as consequence of their employment following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. of such levels for exposure to humans: Attention: --IEEE Std. 1528:2013 and KDB447498, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure --American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning lable is affixed to all units. In order to comply with RF exposure requirements, a minimum Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. distance of 2.5cm must be maintained when held-to-face, and body-worn operations are restricted to the approved --American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement original acessories (belt clip). Do not use this device when antenna shows obvious damages of Potentially Hazardous Electromagnetic Fields- RF and Microwave. This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID:POD-DMR1 to gain further The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to asÿsure that this radio operates with the FCC RF information include SAR Values. exposure limits of this radio.

SAFETY INFORMATION FOR USER The transceiver is excellently designed with advanced technology. Please observe the following precautions to perform your obligation, prevent personal injury and ensure the safety of transceiver usage. 1. Keep the transceiver and accessories away from children. 2. Please do not try to open or modify the transceiver without permission, non-professionals process may also cause damage. 3. Please use assorted battery and charger to avoid damage. 4. Please use assorted antenna to ensure the communication distance. 5. Please do not expose the transceiver to long period of direct sunlight, nor place it close to heat appliances. 6. Please do not put the transceiver in excessively dusty or humid areas. 7. Do not use harsh chemicals, cleaning solvents to clean the transceiver. 8. Do not transmit without antenna. 9. When using this transceiver, we recommend transmitting for 1 minute then receiving for 4 minutes. Continuous transmitting for long time or working in high power will heat the back of the transceiver. Do not place the transceiver’s hot back close to any surface of plastic. 10.If any abnormal odor or smoke detected coming from the transceiver, turn off the power and take off the battery pack and its case. Then contact local dealers. 11.We and our distributors will offer safety/RF exposure trainings to the users after purchasing the devices.

Main Features Programmable multifunction key Welcome to use 7Y7Z" two—way radio


Unpacking and Checking Equipment Charging the Battery Welcome to use 799 MD—280 radios, before using we suggest you: Please use the battery charger designated by 77777 to charge battery, and follow the steps: Please check the packing box of this product and sse If there are signs of damage. = Insart DC jack of power adapterInto DC Jack behind the charging Iit. Please open the packing box carefully. We recommend that you identify the items listed in the = Insert power adapter into AC power supply socket, now the charging red and green indica— following packing list. if you find that our product and its accessories in handling are lost or tor lights, successfully connect the power supply. damaged during the shipment. Please Immediately contact 7997 dealers. = Insart the battery to radlo equipped with battery Into the charging Iit. 1 Red indioator keeps lighting means radio is undercharging. Parts List Red indicator flashos means battery not be used for long time and over—discharged. And will Tum to normal charge when red indicator keeps lighting. = Confirm the battery is fully charged, when red Indlcator goes out. Antenna (1) Li—lon battory (1) Bolt Clip (1) Charger (1) = Please take off the adaptor and battery. Charger Adaptor (1) Usor‘s Manual (1) «n

Using the battery Battery Type The battery is not completely charged at the factory, please charge it before using. Please use the 7777assigned battery to charge. it maybe explode and harm to human body After purchase or extendad storage (more than two months), the first time to charge battary If use other batteries. cannot make battery reach its normal operating capacity. After repeating charge /discharge it Safety Tips two or thrae times, the operating capacity willincrease to its normal capacity. * Do not discard the battery into fre. Netice: Afferfully charge the battery, pleaso do not charge it again and should take it off rom the « Do not unfold the battery case by yourself. charger.If not, it wil short or damage the battery lfor over charge. Battery Storage Noto: 1) Please fully charged battery first to store before long time no useIt. To avald the battery = The temperature for charging should be from 5°Cto 40°C. Battery can not be over fully charged self over discharge and being damage. out of this temperature range. Please prepare a spare battery for the cooler weather and do not 2) To avoid short the battery capacity, plesse fully charged the battery after long fime no us discard the defect battery. Bocause it may b used under the normal temperature. Recommend charge the battery agaln after sx months. = Please clean the battery torminal whenit covers with some dust or diy. 3) Please take care the temperature and humidity for storing battery. Make sure the battery = To make sure the battery can be normal use and charge. store under the normal temperature, cool and dry to reduce battery discharge. = Please tum off the radio power before charging. = Do not charge the battery before radlo or the battary baing wet. = Please change another new bettery if battery can not be racover normal capaity afterfully charged.

Installing and uninstalling of the accessories Installing / Removing the Battery ‘To install the battery into the battory positioning hole of radio bottom, then press the battery, make the button completely to lock battery. To remove the battery, please tum off the radio, and then push up the battery button of radio top, finally take off the battery. Installing and uninstalling of the accessories Getting Acquainted (Install the battory) (Remove the battery) InelaAspadaed

Installing/Removing the Antenna Installing Earphone Screw the antenna into the connector on the top of the radio by holding the antenna at its Uncover earphone lid, directly insert earphones into base and tuming it clockwise untll secure. To fum the antenna counter—clockwise until you earphone holos (earphones need to be additionally can remove it purchased) Note: If your radlo developed with VOX function, you should re—tum on radio power once to active VOX function. Installing the belt clip If necessary, attach the belt clip to the back of battery with the screws supplied carry conveniently.

Getting Acquainted channel selactor knob Rotale to choose deslnd 1—18 Antenna (Two Zonce Avalable) SK1 Radio on—offfvolume control Inlcator knob Red lght flashes when transmiting Pewer on by retating clockwise. Green lght fashes when receiving Sk2 Power of by rotating counter clocislee 1ll hear the "cate" sount. Speaker —— Battery Pack Note: Program Key 1/2 can be defined the following functions by shortlong prese. SK: 1. None 2, Beeper On/Off 3. HighLow Power 4. Monitor 5. One—Key 6. One—Key 7. One—Key 8. One—Key 9. One—Key 10. One—Key 11. Scanning ON/OFF 12. SQL 13. Volce Encryption onfaff 14. VOX ONIOFE 15. Zone Swtch 16. Battery Indlcator 17. Lone Work ON/OFF 18. Emergency Alarm 19. Talk around function


Document Created: 2017-10-09 16:04:03
Document Modified: 2017-10-09 16:04:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC