Test report

FCC ID: PJONBX208HQCG

Test Report

Download: PDF
FCCID_2717760

FCC RF Test Report Report No. : FR570801D FCC RF Test Report APPLICANT : Arima Communication Corporation EQUIPMENT : 8" tablet BRAND NAME : Nabi MODEL NAME : NBX208HQCG MARKETING NAME : Nabi ELEV-8 FCC ID : PJONBX208HQCG STANDARD : FCC Part 15 Subpart C §15.225 CLASSIFICATION : (DXX) Low Power Communication Device Transmitter The product was received on Jul. 08, 2015 and testing was completed on Aug. 01, 2015. We, SPORTON INTERNATIONAL (KUNSHAN) INC., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL (KUNSHAN) INC., the test report shall not be reproduced except in full. Reviewed by: Joseph Lin / Supervisor Approved by: Jones Tsai / Manager SPORTON INTERNATIONAL (KUNSHAN) INC. No. 3-2, PingXiang Road, Kunshan, Jiangsu Province, P. R. China SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 1 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D Table of Contents SUMMARY OF THE TEST RESULT ...........................................................................................................................4 1. GENERAL INFORMATION......................................................................................................................................5 1.1 Applicant .......................................................................................................................................................................... 5 1.2 Manufacturer..................................................................................................................................................................... 5 1.3 Product Details .................................................................................................................................................................. 5 1.4 Modification of EUT............................................................................................................................................................ 6 1.5 Testing Location ................................................................................................................................................................ 6 1.6 Applicable Standards ......................................................................................................................................................... 6 1.7 Test Modes ....................................................................................................................................................................... 7 1.8 Test Configurations ............................................................................................................................................................ 8 1.9 Table for Supporting Units .................................................................................................................................................. 9 2. CONDUCTED EMISSION TEST ............................................................................................................................10 2.1 Measuring Instruments ..................................................................................................................................................... 10 2.2 Test setup ...................................................................................................................................................................... 10 2.3 Test Result of Conducted Emission Test ............................................................................................................................. 10 2.4 AC Power Line Conducted Emissions Measurement ............................................................................................................ 11 3. CONDUCTED TEST ITEMS ..................................................................................................................................12 3.1 Measuring Instruments ..................................................................................................................................................... 12 3.2 Test Setup ...................................................................................................................................................................... 12 3.3 Test Result of Conducted Test Items .................................................................................................................................. 12 3.4 20dB Spectrum Bandwidth Measurement ........................................................................................................................... 13 3.5 Frequency Stability Measurement ...................................................................................................................................... 13 4. RADIATED TEST ITEMS .......................................................................................................................................14 4.1 Measuring Instruments ..................................................................................................................................................... 14 4.2 Test Setup ...................................................................................................................................................................... 14 4.3 Test Result of Radiated Test Items .................................................................................................................................... 14 4.4 Field Strength of Fundamental Emissions and Mask Measurement ........................................................................................ 15 4.5 Radiated Emissions Measurement ..................................................................................................................................... 16 5. LIST OF MEASURING EQUIPMENT ....................................................................................................................18 APPENDIX A. TEST RESULTS OF CONDUCTED EMISSION TEST APPENDIX B. TEST RESULTS OF CONDUCTED TEST ITEMS B.1.Test Result of 20dB Spectrum Bandwidth B.2 Test Result of Frequency Stability APPENDIX C. TEST RESULTS OF RADIATED TEST ITEMS C.1 Test Result of Field Strength of Fundamental Emissions C.2 Results of Radiated Emissions (9 kHz~30MHz) C.3 Results of Radiated Emissions (30MHz~1GHz) APPENDIX D. SETUP PHOTOGRAPHS SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 2 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR570801D Rev. 01 Initial issue of report Aug. 12, 2015 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 3 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D SUMMARY OF THE TEST RESULT Applied Standard: 47 CFR FCC Part 15 Subpart C / IC RSS-210 issue 8 Part FCC Rule IC Rule Description of Test Result Under Limit AC Power Line Conducted 2.15 dB at 3.1 15.207 RSS-GEN 8.8 Complies Emissions 1.02MHz Field Strength of 72.88 dB at 3.2 15.225(a)(b)(c) A2.6 Complies Fundamental Emissions 13.560 MHz 3.3 2.1049 - 20dB Spectrum Bandwidth Complies - 7.13 dB at 15.225(d) 3.4 A2.6 Radiated Emissions Complies 31.940 MHz 15.209 for Peak 3.5 15.225(e) A2.6 Frequency Stability Complies - 3.6 15.203 - Antenna Requirements Complies - Test Items Uncertainty Remark AC Power Line Conducted Emissions 2.3dB Confidence levels of 95% Radiated Emissions (30MHz~1000MHz) 5.1dB Confidence levels of 95% SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 4 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 1. GENERAL INFORMATION 1.1 Applicant Arima Communication Corporation No.16, Lane 658, Yingtao Rd., Yingge Dist., New Taipei City 23943, Taiwan (R.O.C.) 1.2 Manufacturer Arima Communication Corporation No.16, Lane 658, Yingtao Rd., Yingge Dist., New Taipei City 23943, Taiwan (R.O.C.) 1.3 Product Details Items Description Tx/Rx Frequency Range 13.553 ~ 13.567MHz Channel Number 1 20dBW 2.49 KHz 99%OBW 2.11 KHz Antenna Type Loop Antenna Type of Modulation ASK Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 5 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 1.4 Modification of EUT No modifications are made to the EUT during all test items. 1.5 Testing Location Test Site SPORTON INTERNATIONAL (KUNSHAN) INC. No. 3-2, PingXiang Road, Kunshan, Jiangsu Province, P. R. China Test Site Location TEL: +86-0512-5790-0158 FAX: +86-0512-5790-0958 Sporton Site No. FCC/IC Registration No. Test Site No. TH01-KS CO01-KS 03CH02-KS Test Engineer Issac Song Eko Guan Simon Lu 418269/4086E Temperature 24~25℃ 22~24℃ 22~23℃ Relative Humidity 49~51% 42~44% 42~43% Note: The test site complies with ANSI C63.4 2009 requirement. 1.6 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  FCC Part 15 Subpart C §15.225  ANSI C63.10-2013  IC RSS-210 Issue 8  IC RSS-Gen Issue 4 SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 6 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 1.7 Test Modes Investigation has been done on all the possible configurations for searching the worst cases. The following table is a list of the test modes shown in this test report. Test Items AC Power Line Conducted Emissions Field Strength of Fundamental Emissions 20dB Spectrum Bandwidth Frequency Stability Radiated Emissions 9kHz~30MHz Radiated Emissions 30MHz~1GHz Note: 1. The EUT was programmed to be in continuously transmitting mode. 2. The ancillary equipment, NFC card, is used to make the EUT (NFC) continuously transmit at 13.56MHz and is placed around 3 cm gap to the EUT. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 7 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 1.8 Test Configurations <AC Conducted Emissions> < For Fundamental Emissions and Mask and Radiated Emissions Measurement > SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 8 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 1.9 Table for Supporting Units Support Unit Manufacturer Model FCC ID System Simulator R&S CMU 200 N/A WLAN AP LINKSYS WRT600N Q87-WRT600NV11 Notebook Lenovo G480 FCC DoC DC Power Supply GW INSTEK GPD-2303S N/A NFC Card N/A N/A N/A Bluetooth Earphone Nokia BH-106 QTLBH-106 Earphone Lenovo LH102 N/A SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 9 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 2. CONDUCTED EMISSION TEST 2.1 Measuring Instruments See list of measuring instruments of this test report. 2.2 Test setup 2.3 Test Result of Conducted Emission Test Please refer to Appendix A. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 10 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 2.4 AC Power Line Conducted Emissions Measurement 2.4.1 Limit For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table. Frequency of Emission Conducted Limit (dBμV) (MHz) Quasi-Peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency. 2.4.2 Test Procedures 1. The EUT was placed 0.4 meter from the conducting wall of the shielding room, and it was kept at least 80 centimeters from any other grounded conducting surface. 2. Connect EUT to the power mains through a line impedance stabilization network (LISN). 3. All the support units are connecting to the other LISN. 4. The LISN provides 50 ohm coupling impedance for the measuring instrument. 5. The FCC states that a 50 ohm, 50 microhenry LISN should be used. 6. Both sides of AC line were checked for maximum conducted interference. 7. The frequency range from 150 kHz to 30 MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth (IF Bandwidth = 9kHz) with Maximum Hold Mode. Then measurement is also conducted by Average Detector and Quasi-Peak Detector Function respectively. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 11 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 3. CONDUCTED TEST ITEMS 3.1 Measuring Instruments See list of measuring instruments of this test report. 3.2 Test Setup 3.2.1 20dB Spectrum Bandwidth 3.2.2 Frequency Stability 3.3 Test Result of Conducted Test Items Please refer to Appendix B. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 12 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 3.4 20dB Spectrum Bandwidth Measurement 3.4.1 Limit Intentional radiators must be designed to ensure that the 20 dB bandwidth of the emissions in the specific band 13.553~13.567MHz 3.4.2 Test Procedures 1. The transmitter output (antenna port) was connected to the spectrum analyzer in peak Max hold mode. 2. The resolution bandwidth of 1 kHz and the video bandwidth of 3 kHz were used. 3. Measured the spectrum width with power higher than 20dB below carrier. 3.5 Frequency Stability Measurement 3.5.1 Limit The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% (100ppm) of the operating frequency over a temperature variation of -20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 3.5.2 Test Procedures 1. The transmitter output (antenna port) was connected to the spectrum analyzer. 2. EUT have transmitted signal and fixed channelize. 3. Set the spectrum analyzer span to view the entire emissions bandwidth. 4. Set RBW = 1 kHz, VBW = 3 kHz with peak detector and maxhold settings. 5. The fc is declaring of channel frequency. Then the frequency error formula is (fc-f)/fc × 106 ppm and the limit is less than ±100ppm. 6. Extreme temperature rule is -20°C~50°C. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 13 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 4. RADIATED TEST ITEMS 4.1 Measuring Instruments See list of measuring instruments of this test report. 4.2 Test Setup 4.2.1 For radiated emissions below 30MHz 4.2.2 For radiated emissions above 30MHz 4.3 Test Result of Radiated Test Items Please refer to Appendix C. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 14 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 4.4 Field Strength of Fundamental Emissions and Mask Measurement 4.4.1 Limit Rules and specifications CFR 47 Part 15 section 15.225(a)-(d) Compliance with the spectrum mask is tested using a spectrum analyzer with Description RBW set to a 9kHz for the band 13.553~13.567MHz Field Strength Field Strength Field Strength Field Strength Freq. of Emission (MHz) (μV/m) at 30m (dBμV/m) at 30m (dBμV/m) at 10m (dBμV/m) at 3m 1.705~13.110 30 29.5 48.58 69.5 13.110~13.410 106 40.5 59.58 80.5 13.410~13.553 334 50.5 69.58 90.5 13.553~13.567 15848 84.0 103.08 124.0 13.567~13.710 334 50.5 69.58 90.5 13.710~14.010 106 40.5 59.58 80.5 14.010~30.000 30 29.5 48.58 69.5 4.4.2 Test Procedures 1. Configure the EUT according to ANSI C63.4. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the loop receiving antenna mounted antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the receiving antenna was fixed at one meter above ground to find the maximum emissions field strength. 4. For Fundamental emissions, use the receiver to measure QP reading. 5. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 6. Compliance with the spectrum mask is tested using a spectrum analyzer with RBW set to a 9kHz for the band 13.553~13.567MHz. Note: Emission level (dBμV/m) = 20 log Emission level (μV/m). SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 15 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 4.5 Radiated Emissions Measurement 4.5.1 Limit The field strength of any emissions which appear outside of 13.553~13.567MHz band shall not exceed the general radiated emissions limits. Frequencies Field Strength Measurement Distance (MHz) (μV/m) (meters) 0.009~0.490 2400/F(kHz) 300 0.490~1.705 24000/F(kHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 4.5.2 Measuring Instrument Setting The following table is the setting of receiver. Receiver Parameter Setting Attenuation Auto Frequency Range: 9kHz~150kHz RBW 200Hz for QP Frequency Range: 150kHz~30MHz RBW 9kHz for QP Frequency Range: 30MHz~1000MHz RBW 120kHz for Peak Note: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz. Radiated emission limits in these two bands are based on measurements employing an average detector. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 16 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 4.5.3 Test Procedures 1. Configure the EUT according to ANSI C63.4. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 7. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. Antenna Requirements 4.5.4 Limit Except for special regulations, the Low-power Radio-frequency Devices must not be equipped with any jacket for installing an antenna with extension cable. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. 4.5.5 Antenna Anti-Replacement Construction An embedded-in antenna design is used. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 17 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D 5. LIST OF MEASURING EQUIPMENT Calibration Instrument Manufacturer Model No. Serial No. Characteristics Test Date Due Date Remark Date Conducted Spectrum Analyzer R&S FSV30 101338 9kHz~30GHz May 04, 2015 Jul. 26, 2015 May 03, 2016 (TH01-KS) Conducted Thermal Chamber Ten Billion TTC-B3S TBN-960502 -40~+150°C Oct. 25, 2014 Jul. 26, 2015 Oct. 24, 2015 (TH01-KS) Conduction EMI Receiver R&S ESCI7 100768 9kHz~7GHz May 04, 2015 Jul. 27, 2015 May 03, 2016 (CO01-KS) Conduction AC LISN MessTec AN3016 060103 9kHz~30MHz Oct. 25, 2014 Jul. 27, 2015 Oct. 24, 2015 (CO01-KS) AC LISN Conduction (for auxiliary MessTec AN3016 060105 9kHz~30MHz Oct. 25, 2014 Jul. 27, 2015 Oct. 24, 2015 (CO01-KS) equipment) ABP000000 AC 0V~300V, Conduction AC Power Source Chroma 61602 Oct. 25, 2014 Jul. 27, 2015 Oct. 24, 2015 811 45Hz~1000Hz (CO01-KS) 9kHz~7GHz; Radiation EMI Test Receiver R&S ESR7 101403 Sep. 29, 2014 Aug. 01, 2015 Sep. 28, 2015 Max 30dBm (03CH02-KS) Radiation Loop Antenna R&S HFH2-Z2 100321 9kHz~30MHz Nov. 13, 2014 Aug. 01, 2015 Nov. 12, 2015 (03CH02-KS) Radiation Bilog Antenna TeseQ CBL6112D 37879 30MHz~2GHz Sep. 13, 2014 Aug. 01, 2015 Sep. 12, 2015 (03CH02-KS) Radiation Amplifier com-power PA-103A 161069 1kHz~1000MHz May 04, 2015 Aug. 01, 2015 May 03, 2016 (03CH02-KS) 6160100024 Radiation AC Power Source Chroma 61601 N/A NCR Aug. 01, 2015 NCR 73 (03CH02-KS) Radiation Turn Table MF MF7802 N/A 0~360 degree NCR Aug. 01, 2015 NCR (03CH02-KS) Radiation Antenna Mast MF MF7802 N/A 1 m~4 m NCR Aug. 01, 2015 NCR (03CH02-KS) SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : 18 of 18 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D Appendix A. Test Results of Conducted Emission Test Test Mode : NFC Tx Test Voltage : 120Vac / 60Hz Bluetooth Link + WLAN Link(2.4G) + USB Cable 1(Charging from Adapter) + USB Function Type : Cable 2(Data Link with Notebook) + Earphone + NFC Tx (1) with antenna Remark: 13.56MHz is the NFC RF fundamental signal. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : A1 of A4 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D Test Mode : NFC Tx Test Voltage : 120Vac / 60Hz Bluetooth Link + WLAN Link(2.4G) + USB Cable 1(Charging from Adapter) + USB Function Type : Cable 2(Data Link with Notebook) + Earphone + NFC Tx (1) with antenna Remark: 13.56MHz is the NFC RF fundamental signal. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : A2 of A4 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D Test Mode : NFC Tx Test Voltage : 120Vac / 60Hz Bluetooth Link + WLAN Link(2.4G) + USB Cable 1(Charging from Adapter) + USB Function Type : Cable 2(Data Link with Notebook) + Earphone + NFC Tx (2) with dummy load Remark: Only the fundamental NFC signal needs to be retested per C63.4. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : A3 of A4 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D Test Mode : NFC Tx Test Voltage : 120Vac / 60Hz Bluetooth Link + WLAN Link(2.4G) + USB Cable 1(Charging from Adapter) + USB Function Type : Cable 2(Data Link with Notebook) + Earphone + NFC Tx (2) with dummy load Remark: Only the fundamental NFC signal needs to be retested per C63.4. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : A4 of A4 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D Appendix B. Test Results of Conducted Test Items B.1 Test Result of 20dB Spectrum Bandwidth Test mode NFC Tx Test Frequency (MHz) 13.56 Date:26.JUL.2015 21:32:51 Date:26.JUL.2015 21:37:25 20dB Bandwidth (kHz) 2.49 99% OccupiedBW(kHz) 2.11 fL＞13.553 13.559276 Test Result Frequency range (MHz) fH＜13.567 13.561766 Complies SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : B1 of B2 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D B.2 Test Result of Frequency Stability Voltage vs. Frequency Stability Temperature vs. Frequency Stability Measurement Measurement Voltage (Vac) Temperature (℃) Frequency (MHz) Frequency (MHz) 120 13.560521 -20 13.560608 102 13.560521 -10 13.560579 138 13.560521 0 13.560565 10 13.560550 20 13.560521 30 13.560507 40 13.560536 50 13.560521 Max.Deviation (MHz) 0.000521 Max.Deviation (MHz) 0.000607 Max.Deviation (ppm) 38.4218 Max.Deviation (ppm) 44.8009 Limit FS < ±100 ppm Limit FS < ±100 ppm Test Result PASS Test Result PASS SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : B2 of B2 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D Appendix C. Test Results of Radiated Test Items C.1 Test Result of Field Strength of Fundamental Emissions Test Mode : NFC Tx Test Frequency (MHz) 13.56 Note: All NFC’s spurious emissions are below 20dB of limits. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : C1 of C3 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D C.2 Results of Radiated Emissions (9 kHz~30MHz) Test Mode : NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.02 44.91 -76.73 121.64 24.85 20 0.06 - - Average 1.27 48.38 -17.12 65.5 28.33 20 0.05 - - QP 1.39 50.39 -14.37 64.76 30.34 20 0.05 - - QP 4.45 45.88 -23.66 69.54 25.72 20 0.16 - - QP 23.76 34.43 -35.11 69.54 14.11 20 0.32 - - QP 28.46 34.37 -35.17 69.54 14.02 20 0.35 - - QP Test Mode : NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.01 34.33 -93.53 127.86 14.27 20 0.06 - - Average 0.02 45.68 -75.96 121.64 25.62 20 0.06 - - Average 0.68 46.6 -24.3 70.9 26.58 20 0.02 - - QP 4.45 40.99 -28.55 69.54 20.83 20 0.16 - - QP 15.79 37.47 -32.07 69.54 17.19 20 0.28 - - QP 25.05 35.95 -33.59 69.54 15.62 20 0.33 - - QP Note: 1. 13.56 MHz is fundamental signal which can be ignored. 2. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 3. Distance extrapolation factor = 40 log (specific distance / test distance) (dB); 4. Limit line = specific limits (dBμV) + distance extrapolation factor. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : C2 of C3 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG

FCC RF Test Report Report No. : FR570801D C.3 Results of Radiated Emissions (30MHz~1GHz) Test Mode : NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 31.94 21.75 -18.25 40 34.88 18.22 1.3 - - Peak 66.86 23.49 -16.51 40 47.25 7.57 1.29 - - Peak 98.87 17.02 -26.48 43.5 36.62 11.19 1.84 - - Peak 147.37 18.64 -24.86 43.5 37.53 11.68 1.99 - - Peak 206.54 27.25 -16.25 43.5 47.18 10.11 2.44 100 137 Peak 316.15 26.13 -19.87 46 42.07 13.65 2.81 - - Peak Test Mode : NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 31.94 32.87 -7.13 40 46 18.22 1.3 100 160 Peak 65.89 20.38 -19.62 40 44.43 7.36 1.19 - - Peak 149.31 21.24 -22.26 43.5 40.06 11.69 2.05 - - Peak 200.72 28.92 -14.58 43.5 49.13 9.84 2.42 - - Peak 267.65 20.3 -25.7 46 37.7 12.42 2.62 - - Peak 894.27 24.85 -21.15 46 29.25 22.5 4.83 - - Peak Note: 1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Emission level (dBμV/m) = 20 log Emission level (μV/m). 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor= Level. SPORTON INTERNATIONAL (KUNSHAN) INC. Page Number : C3 of C3 TEL : 86-0512-5790-0158 Report Issued Date : Aug. 12, 2015 FAX : 86-0512-5790-0958 Report Version : Rev. 01 FCC ID : PJONBX208HQCG


Document Created: 2015-08-12 19:26:48
Document Modified: 2015-08-12 19:26:48
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC