LMA Letter

FCC ID: PJMMU02

Cover Letter(s)

Download: PDF
FCCID_1246280

TÜV SÜD SENTON GmbH • Äußere Frühlingstraße 45 • 94315 Straubing • Deutschland

PHOENIX TEST-LAB GmbH
Koenigswinkel 10
D-32825 Blomberg
Germany



In reference to FCC ID PJMMU02
Justification for Part 15 Unlicensed Modular Transmitter Approval
according to DA 00-1407

1. Own RF Shielding
   Not complied, but subject to limited modular approval.
   The Grantee can demonstrate that it will retain control over the final installation of the device, such that
   compliance of the end product is assured. In such a case, an operating condition on the grant of
   equipment authorization for the module would state that the module is only approved for use when
   installed in devices produced by a specific manufacturer, typically the Grantee.
   Integration of this radio module into final host devices will only be performed by the Grantee himself or
   dedicated OEM integrators to assure always compliance of the final end-product with the FCC regulations
2. Buffered Modulation inputs
   Complied, see schematics diagrams: IC N301
3. Own power supply regulation
   Complied, voltage regulated power supply on board, see schematic diagram: IC U602
4. Antenna requirements
   Complied, unique antenna coupler employed
5. Test in stand-alone configuration
   Complied, see test report for details. Cable lengths typical to actual use.
6. Own FCC ID
   Complied, the exterior label will be "Contains FCC ID PJMMU02"
7. The Modular Transmitter must comply with any specific rule and the manufacturer must provide
   adequate instructions
   The EUT is compliant with all applicable FCC rules. Detail instructions are given in the User
   guide.
8. RF Exposure requirements
   Complied, see test report page 79

TÜV SÜD SENTON GmbH



Document Created: 2010-02-24 13:02:44
Document Modified: 2010-02-24 13:02:44

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC