User Manual ANTU290290

FCC ID: PJMLRU1002A

Users Manual

Download: PDF
FCCID_4433609

IDENTIFICATION




INSTALLATION



ID ANT.U290/290-FCC
Robust UHF Long Range Antenna 65° circular




M90115-0e-ID-B


 IDENTIFICATION                          ID ANT.U290/290-FCC                                           Note




                                                   Note
Note


© Copyright by
       FEIG ELECTRONIC GmbH
       Lange Strasse 4
       D-35781 Weilburg (Germany)
       Tel.: +49 6471 3109-0
       http://www.feig.de
       identification-support@feig.de

With the edition of this document, all previous editions become void. Indications made in this manual may be
changed without previous notice.
Copying of this document and giving it to others and the use or communication of the contents thereof are
forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved
in the event of the grant of a patent or the registration of a utility model or design.
Composition of the information in this document has been done to the best of our knowledge.
FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this
manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since,
despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips.
The instructions given in this manual are based on advantageous boundary conditions.
FEIG ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments
and does not give any guarantee for the functionality of the complete system which incorporates the subject
of this document.
FEIG ELECTRONIC GmbH calls explicit attention that devices which are subject of this document are not
designed with components and testing methods for a level of reliability suitable for use in or in connection
with surgical implants or as critical components in any life support systems whose failure to perform can
reasonably be expected to cause significant injury to human health. To avoid damage, injury or death the
user or application designer must take reasonably prudent steps to protect against system failures.
FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this
document and makes no representation that they are free of patent infringement. FEIG ELECTRONIC GmbH
does not convey any license under its patent rights nor the rights of others.




                                             INSTALLATION                                     Page 2 of 11


  IDENTIFICATION                  ID ANT.U290/290-FCC       Contents



                                       Contents
Contents




1          Safety Instructions                                      4

2          Performance Features of ID ANT.U290/290-FCC              5

3          Installation                                             6

4          Accessories                                              8

5          VSWR                                                     9

6          Beamwidth                                               10

7          Technical Data                                          11




                                                         Page 3 of 11


  IDENTIFICATION                                 ID ANT.U290/290-FCC                           1 Safety Instructions



1 Safety Instructions
Safety Instructions


►         The device may only be used for the intended purpose designed by the manufacturer.
►         The manual must be read thoroughly and kept safe and accessible for all users.
►         Unauthorized changes and the use of spare parts and additional devices which have not been sold or
          recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized
          measures shall exclude any liability by the manufacturer.
►         The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the
          device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in
          the manual or automatically set parameters for a device or for an incorrect application of a device.
►         Repairs may only be executed by the manufacturer.
►         Installation, operation and maintenance procedures should only be carried out by qualified personnel.
►         Use of the device and its installation must be in accordance with national legal requirements and local
          electrical codes.
►         When working on devices the valid safety regulations must be observed.
►         Prevent children and unauthorized persons from accessing the device.
►         Equipment is intended for use only in restricted access area.
►         Special advice for carriers of cardiac pacemakers:
          Although this device doesn’t exceed the valid limits for electromagnetic fields you should keep a
          minimum distance of 25 cm between the device or the antenna and your cardiac pacemaker.




                                                     INSTALLATION                                       Page 4 of 11


 IDENTIFICATION                           ID ANT.U290/290-FCC                     2 Performance Features



2 Performance Features of ID ANT.U290/290-FCC
Performance Features



The antenna ID ANT.U290/290-FCC is a circular polarized antenna and can be used at operating
frequencies in the UHF range from 902 MHz – 928 MHz.
Due to the circular polarization a reading of transponders is possible in random orientations.
The antenna is optimized for the UHF frequency band dedicated to RFID applications under FCC. In this
frequency band the antenna offers best possible reading performance.

                       Description                Frequency                          Order Number
                 ID ANT.U290/290-FCC          902 MHz – 928 MHz                      5236.000.10.00
Table 1: Ordering Information – Antenna




                                              INSTALLATION                                       Page 5 of 11


  IDENTIFICATION                        ID ANT.U290/290-FCC                                3 Installation



3 Installation
Installation



The ID ANT.U290/290-FCC is designed to be mounted outdoors. Four holes for M5 screws are provided on
the backside of the housing for mounting on a VESA bracket. The screws used should have a screw-in depth
of maximum 8 mm (0.3"). For secondary protection the antenna can be secured by means of an eye bolt,
that should be fixed with screw locking varnish, and e.g. a wire rope. The suitable accessory ID ANT.UEB-A
can be purchased from FEIG ELECTRONIC.




                                 Fig. 1: Dimensional drawing – back view




                                            INSTALLATION                                   Page 6 of 11


IDENTIFICATION                         ID ANT.U290/290-FCC                             3 Installation




                                Fig. 2: Dimensional drawing - side view

    CAUTION:

•   Do not exceed the bending radius of the connection cable (15 mm static, 30 mm dynamic) to
    prevent damage and a decrease of the antenna performance.

•   To keep the full protection class and to prevent performance losses of the antenna it needs to be
    ensured that the screw plug is not damaged.




                                          INSTALLATION                                 Page 7 of 11


 IDENTIFICATION                          ID ANT.U290/290-FCC                                4 Accessories



4 Accessories
Accessories



For the ID ANT.U290/290-FCC following optional accessories are available:

      Order Number             Article                                    Description
         5241.001.00         ID ANT.C2-B                       UHF Antenna Cable SMA/TNC 2 m
         5241.002.00         ID ANT.C6-B                       UHF Antenna Cable SMA/TNC 6 m
         5243.001.00         ID ANT.C2-C                      UHF Antenna Cable R-TNC/TNC 2 m
         5243.002.00         ID ANT.C6-C                      UHF Antenna Cable R-TNC/TNC 6 m
         5335.000.00         ID ANT.C6-x                  UHF Antenna Extension Cable TNC/TNC 6 m
         5254.000.00    ID ANT.UEB-A Eye Bolt          M6 eye bolt for secondary protection, PU: 10 pieces

 NOTE:
The maximum tightening torque of the TNC jack is 0,45 Nm (4.0 lbf in).




                                            INSTALLATION                                      Page 8 of 11


 IDENTIFICATION                       ID ANT.U290/290-FCC            5 VSWR



5 VSWR
VSWR



The typical VSWR of the antenna ID ANT.U290/290-FCC is < 1,2:1.




                                          INSTALLATION            Page 9 of 11


 IDENTIFICATION                          ID ANT.U290/290-FCC       6 Antenna Pattern



6 Beamwidth
Antenna Pattern



The 3 dB beamwidth of the antenna is 65 ° x 65 °.




                                          Fig. 3: 3 dB beamwidth




                                            INSTALLATION              Page 10 of 11


 IDENTIFICATION             ID ANT.U290/290-FCC                         7 Technical Data



7 Technical Data
Technical Data

 Mechanical Data
 Housing                              Plastic (ASA-PC)
                                      Aluminum
 Dimension (W x H x D)                288 mm x 288 mm x 65 mm
                                      (11.3" x 11.3" x 2.6")
 Weight                               1550 g
 Mounting                             VESA FDMI MIS-D 100 mm x 100 mm
 Protection Class                     IP 65
 Colour                               RAL7021 (black gray)
                                      Aluminum
 Electrical Data
 Operating Frequency                  902 MHz – 928 MHz
 Antenna Gain                         9,0 dBic (± 0,5)
 3 dB Beamwidth
 •         E-Plane                    65°
 •         H-Plane                    65°
 Polarization                         Circular
 VSWR                                 < 1,2:1
 Antenna Connector                    TNC socket (50 Ω)
 Environmental Conditions
 Temperature Range
 •         Operation                  -25 °C to 55 °C
 •         Storage                    -25 °C to 80 °C
 Humidity                             0 % to 95 % (non-condensing)
 Vibration                            EN 60068-2-6
                                      10 Hz to 150 Hz: 0,075 mm / 1 g
 Shock                                EN 60068-2-27
                                      Acceleration: 30 g
 Applicable Standards
 Radio Regulation
 •         Europe                     EN 302 208
 •         USA                        FCC 47 CFR Part 15
 •         Canada                     IC RSS-GEN, RSS-210
 •         India                      BIS IS 13252 Part 1
 EMC                                  EN 301 489
 Safety
 •         Low Voltage                EN 62368
 •         Human Exposure             EN 50364
 •         Fire                       EN 45545
 Others                               RoHS, WEEE




                              INSTALLATION                                Page 11 of 11



Document Created: 2019-05-29 10:57:53
Document Modified: 2019-05-29 10:57:53

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC