TestReport.pdf

FCC ID: PJMCPR44

Test Report

Download: PDF
FCCID_2653029

TEST REPORT Test report no.: 1-9651/15-01-02 Testing laboratory Applicant CETECOM ICT Services GmbH FEIG ELECTRONIC GmbH Untertuerkheimer Strasse 6 – 10 Lange Str. 4 66117 Saarbruecken / Germany 35781 Weilburg-Waldhausen / GERMANY Phone: + 49 681 5 98 - 0 Phone: +49 6471 31 09-0 Fax: + 49 681 5 98 - 9075 Fax: +49 6471 310-999 Internet: http://www.cetecom.com Contact: Bernhard Schüßler e-mail: ict@cetecom.com e-mail: bernhard.schuessler@feig.de Phone: +49 6471 310-9435 Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) Manufacturer The accreditation is valid for the scope of testing FEIG ELECTRONIC GmbH procedures as stated in the accreditation certificate with Lange Str. 4 the registration number: D-PL-12076-01-00 35781 Weilburg-Waldhausen / GERMANY Test standard/s 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 210 Issue 8 Spectrum Management and Telecommunications Radio Standards Specification - Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: RF Reader Module Model name: ID CPR44 FCC ID: PJMCPR44 IC: 6633A-CPR44 Frequency: 13.56 MHz Technology tested: RFID Antenna: Integrated antenna Power supply: 5 V DC by power supply Temperature range: -25°C to +70°C This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorised: Test performed: cn=Christoph Schneider, o=CETECOM ICT cn=Marco Bertolino, o=CETECOM ICT Services GmbH, ou=SND-120402, Services GmbH, ou=BTL-100826, email=marco.bertolino@cetecom.com, c=DE email=christoph.schneider@cetecom.com, 2015.06.17 15:51:11 +02'00' c=DE 2015.06.17 15:49:54 +02'00' Marco Bertolino Christoph Schneider Lab Manager Testing Manager Radio Communications & EMC Radio Communications & EMC

Test report no.: 1-9651/15-01-02 1 Table of contents 1 Table of contents ............................................................................................................................................2 2 General information .......................................................................................................................................3 2.1 Notes and disclaimer ..........................................................................................................................3 2.2 Application details ...............................................................................................................................3 3 Test standard/s ...............................................................................................................................................3 4 Test environment ............................................................................................................................................4 5 Test item ..........................................................................................................................................................4 5.1 Additional information ........................................................................................................................4 6 Test laboratories sub-contracted .................................................................................................................4 7 Description of the test setup .........................................................................................................................5 7.1 Shielded semi anechoic chamber ......................................................................................................6 7.2 Shielded full anechoic chamber.........................................................................................................7 7.3 Conducted measurements normal and extreme conditions ...........................................................8 8 Summary of measurement results ...............................................................................................................9 9 Additional comments .....................................................................................................................................9 10 Measurement results ................................................................................................................................10 10.1 Occupied bandwidth ......................................................................................................................10 10.2 Field strength of the fundamental ................................................................................................12 10.3 Field strength of the harmonics and spurious ...........................................................................13 10.4 Frequency error .............................................................................................................................16 10.5 Conducted limits ............................................................................................................................17 11 Observations .............................................................................................................................................19 Annex A Document history ..........................................................................................................................20 Annex B Further information ........................................................................................................................20 Annex C Accreditation Certificate ...............................................................................................................21 Page 2 of 21

Test report no.: 1-9651/15-01-02 2 General information 2.1 Notes and disclaimer The test results of this test report relate exclusively to the test item specified in this test report. CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of CETECOM ICT Services GmbH. The testing service provided by CETECOM ICT Services GmbH has been rendered under the current "General Terms and Conditions for CETECOM ICT Services GmbH". CETECOM ICT Services GmbH will not be liable for any loss or damage resulting from false, inaccurate, inappropriate or incomplete product information provided by the customer. Under no circumstances does the CETECOM ICT Services GmbH test report include any endorsement or warranty regarding the functionality, quality or performance of any other product or service provided. Under no circumstances does the CETECOM ICT Services GmbH test report include or imply any product or service warranties from CETECOM ICT Services GmbH, including, without limitation, any implied warranties of merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by CETECOM ICT Services GmbH. All rights and remedies regarding vendor’s products and services for which CETECOM ICT Services GmbH has prepared this test report shall be provided by the party offering such products or services and not by CETECOM ICT Services GmbH. In no case this test report can be considered as a Letter of Approval. This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. 2.2 Application details Date of receipt of order: 2015-03-31 Date of receipt of test item: 2015-04-01 Start of test: 2015-05-11 End of test: 2015-05-13 Person(s) present during the test: -/- 3 Test standard/s Test standard Date Test standard description 47 CFR Part 15 -/- Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 210 Issue 8 01.12.2010 Spectrum Management and Telecommunications Radio Standards Specification - Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment RSS - Gen Issue 4 01.11.2014 Spectrum Management and Telecommunications Radio Standards Specifications - General Requirements and Information for the Certification of Radio Apparatus Page 3 of 21

Test report no.: 1-9651/15-01-02 4 Test environment Tnom +22 °C during room temperature tests Temperature: Tmax +70 °C during high temperature tests Tmin -25 °C during low temperature tests Relative humidity content: 43 % Barometric pressure: not relevant for this kind of testing Vnom 5 V DC by power supply Power supply: Vmax 5.25 V Vmin 4.75 V 5 Test item Kind of test item : RF Reader Module PMN : ID CPR44 HVIN : ID CPR44 FVIN : -/- HMN : -/- S/N serial number : 5299382 Hardware version : FE 670 Software version : 03.95.00 Frequency band : 13.56 MHz Type of radio transmission : modulated carrier Use of frequency spectrum : Type of modulation : A1D Number of channels : 1 Antenna : Integrated antenna Power supply : 5 V DC by power supply Temperature range : -25°C to +70°C 5.1 Additional information The content of the following annexes is defined in the QA. It may be that not all of the listed annexes are necessary for this report, thus some values in between may be missing. Test setup- and EUT-photos are included in test report: 1-9651/15-01-01_AnnexB 1-9651/15-01-01_AnnexD 6 Test laboratories sub-contracted None Page 4 of 21

Test report no.: 1-9651/15-01-02 7 Description of the test setup Typically, the calibrations of the test apparatus are commissioned to and performed by an accredited calibration laboratory. The calibration intervals are determined in accordance with the DIN EN ISO/IEC 17025. In addition to the external calibrations, the laboratory executes comparison measurements with other calibrated test systems or effective verifications. Weekly chamber inspections and range calibrations are performed. Where possible, RF generating and signalling equipment as well as measuring receivers and analysers are connected to an external high-precision 10 MHz reference (GPS-based or rubidium frequency standard). In order to simplify the identification of the equipment used at some special tests, some items of test equipment and ancillaries can be provided with an identifier or number in the equipment list below (Lab/Item). Agenda: Kind of Calibration k calibration / calibrated EK limited calibration ne not required (k, ev, izw, zw not required) zw cyclical maintenance (external cyclical maintenance) ev periodic self verification izw internal cyclical maintenance Ve long-term stability recognized g blocked for accredited testing vlkI! Attention: extended calibration interval NK! Attention: not calibrated *) next calibration ordered / currently in progress Page 5 of 21

Test report no.: 1-9651/15-01-02 7.1 Shielded semi anechoic chamber The radiated measurements are performed in vertical and horizontal plane in the frequency range from 9 kHz to 1 GHz in semi-anechoic chambers. The EUT is positioned on a non-conductive support with a height of 0.80 m above a conductive ground plane that covers the whole chamber. The receiving antennas are confirmed with specifications ANSI C63. These antennas can be moved over the height range between 1.0 m and 4.0 m in order to search for maximum field strength emitted from EUT. The measurement distances between EUT and receiving antennas are indicated in the test setups for the various frequency ranges. For each measurement, the EUT is rotated in all three axes until the maximum field strength is received. The wanted and unwanted emissions are received by spectrum analysers where the detector modes and resolution bandwidths over various frequency ranges are set according to requirement ANSI C63. Equipment table: Lab / INV. No Kind of Last Next No. Equipment Type Manufact. Serial No. Item Cetecom Calibration Calibration Calibration 1 n. a. Anechoic chamber FAC 3/5m MWB / TDK 87400/02 300000996 ev 2 45 Switch-Unit 3488A HP 2719A14505 300000368 g DC power supply, 3 50 6032A HP 2920A04466 300000580 ne 60Vdc, 50A, 1200 W 4 50 EMI Test Receiver ESCI 3 R&S 100083 300003312 k 26.01.2015 26.01.2016 Analyzer-Reference- A3509 07/0 5 50 System (Harmonics ARS 16/1 SPS 300003314 Ve 11.02.2014 11.02.2016 0205 and Flicker) 6 50 Antenna Tower Model 2175 ETS-Lindgren 64762 300003745 izw Positioning 7 50 Model 2090 ETS-Lindgren 64672 300003746 izw Controller Turntable Interface- 8 50 Model 105637 ETS-Lindgren 44583 300003747 izw Box TRILOG Broadband 9 50 Test-Antenna 30 VULB9163 Schwarzbeck 295 300003787 k 22.04.2014 22.04.2016 MHz - 3 GHz 10 50 Spectrum-Analyzer FSU26 R&S 200809 300003874 k 26.01.2015 26.01.2016 Breitband 11 50 Doppelsteg- BBHA9120 B Schwarzbeck 188 300003896 k 10.06.2013 10.06.2015 Hornantenne Page 6 of 21

Test report no.: 1-9651/15-01-02 7.2 Shielded full anechoic chamber Equipment table: Lab / INV. No Kind of Last Next No. Equipment Type Manufact. Serial No. Item Cetecom Calibration Calibration Calibration 1 n. a. Anechoic chamber FAC 3/5m MWB / TDK 87400/02 300000996 ev DC power supply, 2 n. a. 6032A HP 2818A03450 300001040 Ve 20.01.2015 20.01.2018 60Vdc, 50A, 1200 W Active Loop Antenna 3 90 6502 Kontron Psychotech 8905-2342 300000256 k 13.06.2013 13.06.2015 10 kHz to 30 MHz MXE EMI Receiver 4 90 N9038A Agilent Technologies MY51210197 300004405 k 06.03.2015 06.03.2016 20 Hz to 26,5 GHz 4U RF Switch 5 90 L4491A Agilent Technologies MY50000037 300004509 ne Platform Page 7 of 21

Test report no.: 1-9651/15-01-02 7.3 Conducted measurements normal and extreme conditions Equipment table: Lab / INV. No Kind of Last Next No. Equipment Type Manufact. Serial No. Item Cetecom Calibration Calibration Calibration EMI Test Receiver 9 1 n. a. kHz - 3 GHz incl. ESPI3 R&S 101713 300004059 k 23.01.2015 23.01.2016 Preselector DC Power Supply 0 2 n. a. 1108-32 Heiden Elektronik 001802 300001383 Ve 29.01.2014 29.01.2017 – 32V Temperature Test 3 n. a. T-40/50 CTS GmbH 064023 300003540 Ve 26.09.2013 26.09.2015 Chamber Page 8 of 21

Test report no.: 1-9651/15-01-02 8 Summary of measurement results ☒ No deviations from the technical specifications were ascertained ☐ There were deviations from the technical specifications ascertained This test report is only a partial test report. The content and verdict of the performed test cases ☐ are listed below. TC Identifier Description Verdict Date Remark CFR Part 15 RF-Testing RSS 210 Issue 8 See table! 2015-06-17 -/- RSS Gen Issue 4 Test Temperature Power source specification Test case Pass Fail NA NP Remark conditions conditions clause RSS Gen No pass / Issue 4 Occupied bandwidth Nominal Nominal ☐ ☐ ☐ ☐ fail criteria Field strength of the § 15.225 (a) fundamental Nominal Nominal ☒ ☐ ☐ ☐ complies § 15.209 Field strength of the & harmonics and Nominal Nominal ☒ ☐ ☐ ☐ complies § 15.225 (b-d) spurious Receiver spurious § 15.109 emissions and cabinet Nominal Nominal ☐ ☐ ☒ ☐ complies radiations §15.107 §15.207 Conducted limits Nominal Nominal ☒ ☐ ☐ ☐ complies Normal & Normal & § 15.225 (a) Frequency tolerance extreme extreme ☒ ☐ ☐ ☐ complies conditions conditions Note: NA = Not Applicable; NP = Not Performed 9 Additional comments Reference documents: None Special test descriptions: None Configuration descriptions: None Page 9 of 21

Test report no.: 1-9651/15-01-02 10 Measurement results 10.1 Occupied bandwidth Measurement: The emission bandwidth (x dB) is defined as the frequency range between two points, one above and one below the carrier frequency, at which the spectral density of the emission is attenuated x dB below the maximum in-band spectral density of the modulated signal. Measurement parameters Detector: Peak Resolution bandwidth: 1 % – 5 % of the occupied bandwidth Video bandwidth: ≥ 3x RBW Trace mode: Max hold Analyser function: 99 % power function Limit: IC for RSP-100 test report coversheet only Result: 99% emission bandwidth 910 kHz Measurement uncertainty ± RBW Page 10 of 21

Test report no.: 1-9651/15-01-02 Plot: Plot 1: 99 % emission bandwidth * RBW 10 kHz Marker 1 [T1 ] VBW 30 kHz -2.19 dBm Ref 10 dBm Att 30 dB SWT 50 ms 13.560000000 MHz 10 OBW910.000000000 kHz Temp 1 [T1 OBW] 0 1 -32.65 dBm A 13.070000000 MHz 1 PK Temp 2 [T1 OBW] MAXH -10 -29.50 dBm 13.980000000 MHz -20 T2 -30 T1 -40 3DB -50 -60 -70 -80 -90 Center 13.56 MHz 500 kHz/ Span 5 MHz Date: 11.MAY.2015 08:29:11 Page 11 of 21

Test report no.: 1-9651/15-01-02 10.2 Field strength of the fundamental Measurement: The maximum detected field strength for the carrier signal. Measurement parameters Detector: Quasi peak / peak (worst case) Resolution bandwidth: 120 kHz Video bandwidth: ≥ 3x RBW Trace mode: Max hold Limit: FCC & IC Frequency Field strength Measurement distance (MHz) (µV/m) (m) 13.553 to 13.567 15,848 (84 dBµV/m) 30 Recalculation: According to ANSI C63.10 Frequency Formula Correction value 𝑑nearfield 𝑑𝑙𝑖𝑚𝑖𝑡 13.56 MHz FSlimit = FSmax −40 log ( ) − 20log⁡( ) -21.76 𝑑𝑚𝑒𝑎𝑠𝑢𝑟𝑒 𝑑𝑛𝑒𝑎𝑟𝑓𝑖𝑒𝑙𝑑 According to ANSI C63.10 Result: Field strength of the fundamental Frequency 13.56 MHz Distance @3m @ 30 m Measured / calculated value 66.94 dBµV/m (peak) 45.18 dBµV/m (peak) Measurement uncertainty ±3 dB Page 12 of 21

Test report no.: 1-9651/15-01-02 10.3 Field strength of the harmonics and spurious Measurement: The maximum detected field strength for the harmonics and spurious. Measurement parameters Quasi peak / average or Detector: peak (worst case – pre-scan) F < 150 kHz: 200 Hz Resolution bandwidth: 150 kHz < F < 30 MHz: 9 kHz 30 MHz < F < 1 GHz: 120 kHz F < 150 kHz: 1 kHz Video bandwidth: 150 kHz < F < 30 MHz: 100 kHz 30 MHz < F < 1 GHz: 300 kHz Trace mode: Max hold Limit: FCC & IC Frequency Field strength Measurement distance (MHz) (dBµV/m) (m) 0.009 – 0.490 2400/F(kHz) 300 0.490 – 1.705 24000/F(kHz) 30 1.705 – 30 30 (29.5 dBµV/m) 30 30 – 88 100 (40 dBµV/m) 3 88 – 216 150 (43.5 dBµV/m) 3 216 – 960 200 (46 dBµV/m) 3 Note: For a reduced measurement distance, please take a look at the limit line and the ANSI C63.10-2013 sub clause 6.4 radiated emissions from unlicensed wireless devices below 30 MHz. Result: Detected emissions Frequency Resolution bandwidth Detector Detected value (MHz) (kHz) See plot 3 Measurement uncertainty ±3 dB Page 13 of 21

Test report no.: 1-9651/15-01-02 Plots: Plot 1: 9 kHz – 30 MHz, magnetic emissions 130 dBµV/m 120 110 100 90 80 70 60 50 - Class - QPeak 40 30 20 10 0 9kHz 100k 1M 10M 30MHz Frequency (MHz) Plot 2: Spectrum mask (the limits are recalculated according to the ANSI C63.10-2013 sub clause 6.4) RBW 9 kHz Marker 1 [T1 ] VBW 100 kHz 66.42 dBµV Ref 90 dBµV Att 50 dB * SWT 60 s 13.568000000 MHz 90 Offset -35.3 dB A 80 1 QP * CLRWR 70 1 LVL 60 FCC15225 50 40 6DB 30 20 10 0 -10 Center 13.56 MHz 200 kHz/ Span 2 MHz Date: 18.MAY.2015 09:42:21 Page 14 of 21

Test report no.: 1-9651/15-01-02 Plot 3: 30 MHz – 1 GHz, vertical and horizontal polarisation 60 55 50 45 F CC _ 1 0 m_ B 40 Level in dBµV/m 35 30 25 20 15 10 5 0 30M 50 60 80 100M 200 300 400 500 8 0 0 1 ,0 5 G F re q u e n c y in H z Final_Result Frequency QuasiPeak Limit Margin Meas. Bandwidth Height Pol Azimuth Corr. (MHz) (dBµV/m) (dBµV/m) (dB) Time (kHz) (cm) (deg) (dB) (ms) 40.689150 27.46 30.00 2.54 1000.0 120.000 100.0 V 232 14.0 81.362250 22.19 30.00 7.81 1000.0 120.000 273.0 V 282 8.4 352.564350 31.91 36.00 4.09 1000.0 120.000 349.0 V 117 16.1 406.796700 28.97 36.00 7.03 1000.0 120.000 100.0 V 3 17.0 420.347850 27.65 36.00 8.35 1000.0 120.000 100.0 V 5 17.2 474.600000 32.95 36.00 3.05 1000.0 120.000 274.0 V 53 18.2 Page 15 of 21

Test report no.: 1-9651/15-01-02 10.4 Frequency error Measurement: The maximum detected field strength for the spurious. Measurement parameters Detector: Peak detector Resolution bandwidth: 10 Hz / 100 Hz Video bandwidth: > RBW Trace mode: Max hold Limit: FCC The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% of the operating frequency over a temperature variation of -20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. (±1.356 kHz) Result: Temperature variation Frequency tolerance Measured frequency Conditions Result (MHz) 13.559812 -20 °C & 100% voltage complies 13.559846 -10 °C & 100% voltage complies 13.559857 0 °C & 100% voltage complies 13.559846 +10 °C & 100% voltage complies 13.559803 +20 °C & 100% voltage complies 13.559792 +30 °C & 100% voltage complies 13.559770 +40 °C & 100% voltage complies 13.559759 +50 °C & 100% voltage complies Measurement uncertainty ± RBW Result: Voltage variation Frequency tolerance Measured frequency Temperature Result (MHz) 13.559802 +20 °C & 85% voltage complies 13.559803 +20 °C & 100% voltage complies 13.559803 +20 °C & 115% voltage complies Measurement uncertainty ± RBW Page 16 of 21

Test report no.: 1-9651/15-01-02 10.5 Conducted limits Measurement: Measurement of the conducted spurious emissions for an intentional radiator that is designed to be connected to the public utility (AC) power line. Measurement parameters Quasi peak / average or Detector: peak (worst case – pre-scan) F < 150 kHz: 200 Hz Resolution bandwidth: F > 150 kHz: 9 kHz F < 150 kHz: 1 kHz Video bandwidth: F > 150 kHz: 100 kHz Trace mode: Max hold Limit: FCC & IC Frequency Quasi-peak Average (MHz) (dBµV/m) (dBµV/m) 0.15 – 0.5 66 to 56* 56 to 46* 0.5 – 5 56 46 5 – 30.0 60 50 Result: Detected emissions Frequency Resolution bandwidth Detector Detected value (MHz) (kHz) All detected peak emissions are below the average limit. Page 17 of 21

Test report no.: 1-9651/15-01-02 Plots: Plot 1: 150 kHz to 30 MHz, phase line FCC Premeasurement Average limit class B Measurement Quasi peak limit class B L_Peaks_fin Phase line Average level Quasi peak level 80.0 70.0 60.0 50.0 Amplitude in dBµV 40.0 30.0 20.0 10.0 0 100.0K 1.0M 10.0M 100.0M Frequency in Hz Project ID: 1-9651/15-01-02 Plot 2: 150 kHz to 30 MHz, neutral line FCC Premeasurement Average limit class B Measurement Quasi peak limit class B N_Peaks_fin Neutral line Average level Quasi peak level 80.0 70.0 60.0 50.0 Amplitude in dBµV 40.0 30.0 20.0 10.0 0 100.0K 1.0M 10.0M 100.0M Frequency in Hz Project ID: 1-9651/15-01-02 Page 18 of 21

Test report no.: 1-9651/15-01-02 11 Observations No observations except those reported with the single test cases have been made. Page 19 of 21

Test report no.: 1-9651/15-01-02 Annex A Document history Version Applied changes Date of release Initial release 2015-06-17 Annex B Further information Glossary AVG - Average DUT - Device under test EMC - Electromagnetic Compatibility EN - European Standard EUT - Equipment under test ETSI - European Telecommunications Standard Institute FCC - Federal Communication Commission FCC ID - Company Identifier at FCC HW - Hardware IC - Industry Canada Inv. No. - Inventory number N/A - Not applicable PP - Positive peak QP - Quasi peak S/N - Serial number SW - Software PMN Product marketing name HMN Host marketing name HVIN Hardware version identification number FVIN Firmware version identification number Page 20 of 21

Test report no.: 1-9651/15-01-02 Annex C Accreditation Certificate Front side of certificate Back side of certificate Note: The current certificate including annex is published on our website (see link below) or may be received from CETECOM ICT Services on request. http://www.cetecom.com/eu/de/cetecom-group/europa/deutschland-saarbruecken/akkreditierungen.html Page 21 of 21


Document Created: 2015-06-17 15:51:11
Document Modified: 2015-06-17 15:51:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC