Test Report

FCC ID: PJL6156388

Test Report

Download: PDF
FCCID_2065193

Raytheon Company ADDENDUM TO TEST REPORT 93870-7 DSRC Reader Model: M215-A2A Tested To The Following Standards: FCC Part 90I Report No.: 93870-7A Date of issue: August 14, 2013 This test report bears the accreditation symbol indicating that the testing performed herein meets the test and reporting requirements of ISO/IEC 17025 under the applicable scope of EMC testing for CKC Laboratories, Inc. We strive to create long-term, trust based relationships by providing sound, adaptive, customer first testing services. We embrace each of our customers’ unique EMC challenges, not as an interruption to set processes, but rather as the reason we are in business. This report contains a total of 29 pages and may be reproduced in full only. Partial reproduction may only be done with the written consent of CKC Laboratories, Inc.

TABLE OF CONTENTS Administrative Information .......................................................................................................................... 3 Test Report Information ............................................................................................................................................3 Revision History .........................................................................................................................................................3 Report Authorization .................................................................................................................................................3 Test Facility Information ............................................................................................................................................4 Software Versions ......................................................................................................................................................4 Site Registration & Accreditation Information ..........................................................................................................4 Summary of Results ...................................................................................................................................................5 Conditions During Testing..........................................................................................................................................5 Equipment Under Test ...............................................................................................................................................6 Peripheral Devices .....................................................................................................................................................6 FCC Part 90I ................................................................................................................................................... 7 RF Power Output .......................................................................................................................................................7 Occupied Bandwidth................................................................................................................................................11 Bandedge .................................................................................................................................................................14 Conducted Spurious Emissions ................................................................................................................................17 Radiated Spurious Emissions ...................................................................................................................................20 Emissions Mask ........................................................................................................................................................23 Supplemental Information .......................................................................................................................... 29 Measurement Uncertainty ......................................................................................................................................29 Emissions Test Details ..............................................................................................................................................29 Page 2 of 29 Report No.: 93870-7A

d b ' ‘Tes ng the Future LABORATORIES, INC. ADMINISTRATIVE INFORMATION Test Report Information REPORT PREPARED FOR: REPORT PREPARED BY: Raytheon Company Joyce Walker 1801 Hughes Drive CKC Laboratories, Inc. Bldg. 675 —D241 Dist. Center 5046 Sierra Pines Drive Fullerton, CA 92834—3310 Mariposa, CA 95338 Representative: Mike Mikasa Project Number: 93870 Customer Reference Number: 4200632228 DATE OF EQUIPMENT RECEIPT: March 12, 2013 DATE(S) OF TESTING: March 12—14, 2013 Revision History Original: Testing of the DSRC Reader, Model: M215—A2A to FCC Part 901. Addendum A: The report was revised to include calculations for additional antenna configurations. Report Authorization The test data contained in this report documents the observed testing parameters pertaining to and are relevant for only the sample equipment tested in the agreed upon operational mode(s) and configuration(s) as identified herein. Compliance assessment remains the client‘s responsibility. This report may not be used to claim product endorsement by A2LA or any government agencies. This test report has been authorized for release under quality control from CKC Laboratories, Inc. Steve Behm Director of Quality Assurance & Engineering Services CKC Laboratories, Inc. Page 3 of 29 Report No.: 93870—7A

Test Facility Information Our laboratories are configured to effectively test a wide variety of product types. CKC utilizes first class test equipment, anechoic chambers, data acquisition and information services to create accurate, repeatable and affordable test results. TEST LOCATION(S): CKC Laboratories, Inc. 110 Olinda Place Brea, CA 92823 Software Versions CKC Laboratories Proprietary Software Version EMITest Emissions 5.00.14 Immunity 5.00.07 Site Registration & Accreditation Information Location CB # TAIWAN CANADA FCC JAPAN Bothell US0081 SL2-IN-E-1145R 3082C-1 318736 A-0148 Page 4 of 29 Report No.: 93870-7A

SUMMARY OF RESULTS Standard / Specification: FCC Part 90I Description Test Procedure/Method Results RF Output Power FCC Part 90I / 90.205 Pass Occupied Bandwidth FCC Part 90I / 2.1049 Pass FCC Bandedge FCC Part 90I / 90.210(k)5 Pass Conducted Spurious Emissions FCC 90I / 90.210(k) Pass Radiated Spurious Emissions FCC 90I / 90.210(k) Pass Emissions Mask FCC Part 90I / 90.205 Pass Conditions During Testing This list is a summary of the conditions noted for or modifications made to the equipment during testing. Summary of Conditions Modifications to EUT during testing: A 0.1uF capacitor added to the T/R control line C196. Page 5 of 29 Report No.: 93870-7A

EQUIPMENT UNDER TEST (EUT) EQUIPMENT UNDER TEST DSRC Reader Manuf: Raytheon Company Model: M215-A2A Serial: 001 PERIPHERAL DEVICES The EUT was tested with the following peripheral device(s): Laptop Power Supply Manuf: Dell Manuf: Lambda Model: PPX Model: LNS-X-12 Serial: 72MUFA00H Serial: NA Page 6 of 29 Report No.: 93870-7A

FCC PART 90I This report contains EMC emissions test results under United States Federal Communications Commission (FCC) 47 CFR Part 90I requirements for radio communications systems licensed and used in the Public Safety, Industrial/Business Radio Pool, and Radiolocation Radio Services. RF Power Output Customer: Raytheon Company Specification: FCC 90.205 RF Output Power Work Order #: 93870 Date: 3/13/2013 Time: 13:39:22 Equipment: DSRC Reader Sequence#: 3 Manufacturer: Raytheon Company Tested By: E. Wong Model: M215-A2A 12VDC S/N: 001 Test Equipment: ID Asset # Description Model Calibration Date Cal Due Date AN02869 Spectrum Analyzer E4440A 2/6/2013 2/6/2015 T1 ANP06153 Cable 16301 10/27/2011 10/27/2013 Equipment Under Test (* = EUT): Function Manufacturer Model # S/N DSRC Reader* Raytheon Company M215-A2A 001 Support Devices: Function Manufacturer Model # S/N Laptop Dell PPX 72MUFA00H Power Supply Lambda LNS-X-12 NA Test Conditions / Notes: The EUT is placed on the test bench. RS232 port is connected to a support laptop. All other ports are left unpopulated for evaluation of RF signal at the antenna port. The spectrum analyzer is connected to Port 1 of the EUT. Port 1 thru Port 4 utilizes the same RF circuit. Digital attenuator set to: 9 Freq: 905MHz, 915MHz, 925MHz Modulation: OOK. Measured Peak Power= 29.04dBm, 29.92dBm, 29.18dBm (0.80 W, 0.98W, 0.83W) Antenna to be used with this product: Sirit, single-element patch antenna , Antenna-024, Gain 15 dBi Transcore, Universal Toll Antenna , AA3152 Gain: 14dBi European Antennas, flat Panel Antenna, FPA15-916H/1159, Gain 15.4dBi Frequency range of measurement = Fundamental Test environment conditions: 25°C, 45% Relative Humidity, 100kPa The EUT obtains 12V DC power from a support DC Power supply. Modification: 0.1uF capacitor added to the T/R control line C196. Center frequency was set to 905MHz, 915MHz and 925MHz. The licensee will adjust the transmit frequency according to appropriate frequency plan at the time of licensing. Page 7 of 29 Report No.: 93870-7A

Test Data Sirit, single-element patch antenna, ANTENNA-024, Gain 15 dBi Freq Conducted Peak Antenna gain Antenna gain ERP ERP power dBi dBd =dBi-2.15 dBm Watt 905 29.04 15 12.85 41.89 15.5 915 29.92 15 12.85 42.77 18.9 925 29.18 15 12.85 42.03 16.0 ERP =conducted power (dBm) + antenna gain (dBd) Transcore, Universal Toll Antenna, AA3152 Gain: 14dBi Freq Conducted Antenna gain Antenna gain ERP ERP Peak power dBi dBd =dBi-2.15 dBm Watt 905 29.04 14 11.85 40.89 12.3 915 29.92 14 11.85 41.77 15.0 925 29.18 14 11.85 41.03 12.7 ERP =conducted power (dBm) + antenna gain (dBd) European Antenna Flat Panel FPA15-916H/1159, Gain 15.4dBi Freq Conducted Antenna gain Antenna gain ERP ERP Peak power dBi dBd =dBi-2.15 dBm Watt 905 29.04 15.4 13.25 42.29 16.9 915 29.92 15.4 13.25 43.17 20.8 925 29.18 15.4 13.25 42.43 17.5 ERP =conducted power (dBm) + antenna gain (dBd) Page 8 of 29 Report No.: 93870-7A

905MHz 915MHz Page 9 of 29 Report No.: 93870-7A

925MHz Test Setup Photos Page 10 of 29 Report No.: 93870-7A

Occupied Bandwidth Test Location: CKC Laboratories, Inc. • 110 N. Olinda Place • Brea, CA 92823 • (714) 993-6112 Customer: Raytheon Company Specification: FCC 2.1049 Occupied bandwidth -23dBc Work Order #: 93870 Date: 3/13/2013 Time: 13:39:22 Equipment: DSRC Reader Sequence#: 3 Manufacturer: Raytheon Company Tested By: E. Wong Model: M215-A2A 12VDC S/N: 001 Test Equipment: ID Asset # Description Model Calibration Date Cal Due Date AN02869 Spectrum Analyzer E4440A 2/6/2013 2/6/2015 T1 ANP06153 Cable 16301 10/27/2011 10/27/2013 Equipment Under Test (* = EUT): Function Manufacturer Model # S/N DSRC Reader* Raytheon Company M215-A2A 001 Support Devices: Function Manufacturer Model # S/N Laptop Dell PPX 72MUFA00H Power Supply Lambda LNS-X-12 NA Test Conditions / Notes: The EUT is placed on the test bench. RS232 port is connected to a support laptop. All other ports are left unpopulated for evaluation of RF signal at the antenna port. The spectrum analyzer is connected to Port 1 of the EUT. Port 1 thru Port 4 utilizes the same RF circuit. Digital attenuator set to : 9 Freq: 905MHz, 915MHz, 925MHz Modulation: OOK. Measured Peak Power= 29.04dBm, 29.92dBm, 29.18dBm (0.80 W, 0.98W, 0.83W) Antenna to be used with this product: Sirit, single-element patch antenna, Antenna-024, Gain 15 dBi. Transcore, Universal Toll Antenna, AA3152 Gain: 14dBi European Antennas, flat Panel Antenna, FPA15-916H/1159, Gain 15.4dBi Frequency range of measurement = Fundamental Test environment conditions: 25°C, 45% Relative Humidity, 100kPa The EUT obtains 12V DC power from a support DC Power supply. Modification: 0.1uF capacitor added to the T/R control line C196. Center frequency was set to 905MHz, 915MHz and 925MHz. The licensee will adjust the transmit frequency according to appropriate frequency plan at the time of licensing. Page 11 of 29 Report No.: 93870-7A

Test Plots 905MHz 915MHz Page 12 of 29 Report No.: 93870-7A

925MHz Test Setup Photos Page 13 of 29 Report No.: 93870-7A

Bandedge Test Location: CKC CKC Laboratories, Inc. •• 110 Laboratories, Inc. 110 N. N. Olinda Olinda Place Place •• Brea, Brea, CA CA 92823 92823 •• (714) (714) 993-6112 993-6112 Customer: Raytheon Company Specification: FCC Band-edge plot, 90.210(k)5 Work Order #: 93870 Date: 3/13/2013 Test Type: Conducted Emissions Time: 13:39:22 Equipment: DSRC Reader Sequence#: 3 Manufacturer: Raytheon Company Tested By: E. Wong Model: M215-A2A 12VDC S/N: 001 Test Equipment: ID Asset # Description Model Calibration Date Cal Due Date AN02869 Spectrum Analyzer E4440A 2/6/2013 2/6/2015 T1 ANP06153 Cable 16301 10/27/2011 10/27/2013 Equipment Under Test (* = EUT): Function Manufacturer Model # S/N DSRC Reader* Raytheon Company M215-A2A 001 Support Devices: Function Manufacturer Model # S/N Laptop Dell PPX 72MUFA00H Power Supply Lambda LNS-X-12 NA Test Conditions / Notes: The EUT is placed on the test bench. RS232 port is connected to a support laptop. All other ports are left unpopulated for evaluation of RF signal at the antenna port. The spectrum analyzer is connected to Port 1 of the EUT. Port 1 thru Port 4 utilizes the same RF circuit. Digital attenuator set to : 9 Freq: 905MHz, 915MHz, 925MHz Modulation: OOK. Measured Peak Power= 29.04dBm, 29.92dBm, 29.18dBm (0.80 W, 0.98W, 0.83W) Antenna to be used with this product: Sirit, single-element patch antenna , Antenna-024, Gain 15 dBi. Transcore, Universal Toll Antenna, AA3152 Gain: 14dBi European Antennas, flat Panel Antenna, FPA15-916H/1159, Gain 15.4dBi Frequency range of measurement = Fundamental Test environment conditions: 25°C, 45% Relative Humidity, 100kPa The EUT obtains 12V DC power from a support DC Power supply. Modification: 0.1uF capacitor added to the T/R control line C196. Center frequency was set to 905MHz, 915MHz and 925MHz. The licensee will adjust the transmit frequency according to appropriate frequency plan at the time of licensing. At transmit frequency of 915MHz, the device complies with 902(k)(6) requirements. 90.210(k) (6) The LMS sub-band edges for non-multi-alteration systems for which emissions must be attenuated are 902.00, 904.00, 909.5 and 921.75 MHz. Page 14 of 29 Report No.: 93870-7A

Test Data 912MHz 915MHz Page 15 of 29 Report No.: 93870-7A

919MHz Test Setup Photos Page 16 of 29 Report No.: 93870-7A

Conducted Spurious Emissions Test Location: Test Location: CKC Laboratories, Inc. • 110 N. Olinda Place • Brea, CA 92823 • (714) 993-6112 Customer: Raytheon Company Specification: FCC 90.210 (k) Work Order #: 93870 Date: 3/13/2013 Test Type: Conducted Emissions Time: 13:39:22 Equipment: DSRC Reader Sequence#: 3 Manufacturer: Raytheon Company Tested By: E. Wong Model: M215-A2A 12VDC S/N: 001 Test Equipment: ID Asset # Description Model Calibration Date Cal Due Date AN02869 Spectrum Analyzer E4440A 2/12/2011 2/12/2013 T1 ANP06153 Cable 16301 10/27/2011 10/27/2013 Equipment Under Test (* = EUT): Function Manufacturer Model # S/N DSRC Reader* Raytheon Company M215-A2A 001 Support Devices: Function Manufacturer Model # S/N Laptop Dell PPX 72MUFA00H Power Supply Lambda LNS-X-12 NA Test Conditions / Notes: The EUT is placed on the test bench. RS232 port is connected to a support laptop. All other ports are left unpopulated for evaluation of RF signal at the antenna port. The spectrum analyzer is connected to Port 1 of the EUT. Port 1 thru Port 4 utilizes the same RF circuit. Digital attenuator set to : 9 Freq: 905MHz, 915MHz, 925MHz Modulation: OOK. Power= 29.04dBm, 29.92dBm, 29.18dBm (0.80 W, 0.98W, 0.83W) Antenna to be used with this product: Sirit, single-element patch antenna, Antenna-024, Gain 15 dBi. Transcore, Universal Toll Antenna , AA3152 Gain: 14dBi European Antennas, flat Panel Antenna, FPA15-916H/1159, Gain 15.4dBi Frequency range of measurement = 9 kHz- 10 GHz. 9kHz -150kHz; RBW=200Hz, VBW=200Hz; 150kHz-30MHz; RBW=9kHz, VBW=9kHz; 30MHz-1000MHz; RBW=120kHz, VBW=120 kHz, 1000MHz-10000MHz; RBW=1 MHz, VBW=1 MHz. Test environment conditions: 25°C, 45% Relative Humidity, 100kPa The EUT obtains 12V DC power from a support DC Power supply. Modification: adding a 0.1uF capacitor to the T/R control line C196. Center frequency was set to 905MHz, 915MHz and 925MHz. The licensee will adjust the transmit frequency according to appropriate frequency plan at the time of licensing. Page 17 of 29 Report No.: 93870-7A

LIMIT LINE FOR SPURIOUS CONDUCTED EMISSION REQUIRED ATTENUATION = 55+10 LOG P DB Limit line (dBuV) = V dBuv - Attenuation V VdBuV  20 Log 1 x 10 6   20 Log V  Log 1 x 10 6  6  20 Log V  20 Log1 x 10  20 Log V  20  6   20 Log V  120 Attenuatio n  55  10 Log P V2  55  10 Log R   55  10 Log V 2 - Log R   55  10 2 Log V - Log R   55  20 Log V - 10 Log R Limit line = V dBuv - Attenuation = 20 Log V + 120 – (55 + 20 Log V – 10Log R) = 20 Log V + 120 – 55 – 20 Log V + 10Log R = 20 Log V + 120 – 55 – 20 Log V + 10Log R = 120 – 55 + 10 Log 50 Note: R = 50 Ω = 120 –55 + 16.897 = 82 dBuV at any power level Page 18 of 29 Report No.: 93870-7A

Test Setup Photos Page 19 of 29 Report No.: 93870-7A

Radiated Spurious Emissions Test Location: CKC Laboratories, Inc. • 110 N. Olinda Place • Brea, CA 92823 • (714) 993-6112 Customer: Raytheon Company Specification: FCC 90.210(k) Radiated Spurious Emission Work Order #: 93870 Date: 3/14/2013 Test Type: Radiated Time: 09:37:01 Equipment: DSRC Reader Sequence#: 4 Manufacturer: Raytheon Company Tested By: E. Wong Model: M215-A2A S/N: 001 Test Equipment: ID Asset # Description Model Calibration Date Cal Due Date T1 AN02869 Spectrum Analyzer E4440A 2/6/2013 2/6/2015 T2 AN00787 Preamp 83017A 4/8/2011 4/8/2013 T3 AN01646 Horn Antenna 3115 4/13/2012 4/13/2014 T4 AN02947 Cable 32022-29094K-29094K-72TC 8/8/2011 8/8/2013 T5 ANP06360 Cable L1-PNMNM-48 8/29/2012 8/29/2014 T6 ANP04382 Cable LDF-50 8/30/2012 8/30/2014 AN00010 Preamp 8447D 3/29/2012 3/29/2014 AN00851 Biconilog Antenna CBL6111C 5/16/2012 5/16/2014 ANP05555 Cable RG223/U 6/19/2012 6/19/2014 ANP05569 Cable RG-214/U 6/19/2012 6/19/2014 AN00314 Loop Antenna 6502 6/29/2012 6/29/2014 Equipment Under Test (* = EUT): Function Manufacturer Model # S/N DSRC Reader* Raytheon Company M215-A2A 001 Support Devices: Function Manufacturer Model # S/N Laptop Dell PPX 72MUFA00H Power Supply Lambda LNS-X-12 NA Page 20 of 29 Report No.: 93870-7A

Test Conditions / Notes: The EUT is placed on the test bench lined with Styrofoam of 10 cm thickness. RS232 port is connected to a support laptop. All ports except for Service port are terminated with sections of cable. Port 1 thru Port 4 utilizes the same RF circuit via RF selector switch are connected to 50 ohm load, Port 1 is connected to 50 ohm load via a section of RF cable. Digital attenuator set to : 9 Power= 29.04dBm, 29.92dBm, 29.18dBm (0.80 W, 0.98W, 0.83W) Freq: 905,MHz, 915MHz,925MHz Modulation: OOK. Antenna to be used with this product: Sirit, single-element patch antenna, Antenna-024, Gain 15 dBi. Transcore, Universal Toll Antenna , AA3152 Gain: 14dBi European Antennas, flat Panel Antenna, FPA15-916H/1159, Gain 15.4dBi Frequency range of measurement = 9 kHz- 10 GHz. 9kHz -150kHz; RBW=200Hz, VBW=200Hz; 150kHz-30MHz; RBW=9kHz, VBW=9kHz; 30MHz-1000MHz; RBW=120kHz, VBW=120 kHz, 1000MHz-10000MHz; RBW=1MHz, VBW=1MHz. Test environment conditions: 25°C, 45% Relative Humidity, 100kPa The EUT obtains 12V DC power from a support DC Power supply. Modification: added a 0.1uF capacitor to the T/R control line C196. Center frequency was set to 905MHz, 915MHz and 925MHz. The licensee will adjust the transmit frequency according to appropriate frequency plan at the time of licensing. Operating Frequency: 905-925 Channels: OOK Highest Measured Output Power: 30.00 (dBm)= 1 (Watts) Distance: 3 meters Limit: 55+10Log(P)= 55.00 dBc Antenna Polarity Freq. (MHz) Reference Level (dBm) dBc (H/V) 1,829.99 -49.6 Horiz Horiz 79.60 1,857.70 -49.8 Vert Vert 79.80 1,849.87 -52.6 Horiz Horiz 82.60 1,295.20 -53.2 Vert Vert 83.20 1,830.00 -54 Vert Vert 84.00 1,849.94 -54 Vert Vert 84.00 2,112.30 -54.4 Vert Vert 84.40 2,517.40 -54.8 Vert Vert 84.80 1,805.92 -55.4 Horiz Horiz 85.40 Page 21 of 29 Report No.: 93870-7A

Test Setup Photos Page 22 of 29 Report No.: 93870-7A

Emissions Mask Test Location: CKC Laboratories, Inc. • 110 N. Olinda Place • Brea, CA 92823 • (714) 993-6112 Customer: Raytheon Company Specification: FCC 90.205 Emission mask Work Order #: 93870 Date: 3/13/2013 Time: 13:39:22 Equipment: DSRC Reader Sequence#: 3 Manufacturer: Raytheon Company Tested By: E. Wong Model: M215-A2A 12VDC S/N: 001 Test Equipment: ID Asset # Description Model Calibration Date Cal Due Date AN02869 Spectrum Analyzer E4440A 2/6/2013 2/6/2015 T1 ANP06153 Cable 16301 10/27/2011 10/27/2013 Equipment Under Test (* = EUT): Function Manufacturer Model # S/N DSRC Reader* Raytheon Company M215-A2A 001 Support Devices: Function Manufacturer Model # S/N Laptop Dell PPX 72MUFA00H Power Supply Lambda LNS-X-12 NA Test Conditions / Notes: The EUT is placed on the test bench. RS232 port is connected to a support laptop. All other ports are left unpopulated for evaluation of RF signal at the antenna port. The spectrum analyzer is connected to Port 1 of the EUT. Port 1 thru Port 4 utilizes the same RF circuit. Digital attenuator set to: 9 Freq: 905MHz, 915MHz,925MHz Modulation: OOK. Measured Peak Power= 29.04dBm, 29.92dBm, 29.18dBm (0.80 W, 0.98W, 0.83W) Antenna to be used with this product: Sirit, single-element patch antenna, Antenna-024, Gain 15 dBi. Transcore, Universal Toll Antenna, AA3152 Gain: 14dBi European Antennas, flat Panel Antenna, FPA15-916H/1159, Gain 15.4dBi Frequency range of measurement = Fundamental Test environment conditions: 25°C, 45% Relative Humidity, 100kPa The EUT obtains 12V DC power from a support DC Power supply. Modification: 0.1uF capacitor added to the T/R control line C196. Center frequency was set to 905MHz, 915MHz and 925MHz. The licensee will adjust the transmit frequency according to appropriate frequency plan at the time of licensing. Additional emission masks (915MHz) were captured at Antenna port 2, antenna port3 and antenna port 4. No deviation in signal characteristic. Page 23 of 29 Report No.: 93870-7A

Test Data Wide Span Emission Page 24 of 29 Report No.: 93870-7A

905MHz 925MHz Page 25 of 29 Report No.: 93870-7A

915MHz, Antenna Port 1 915MHz, Antenna Port 2 Page 26 of 29 Report No.: 93870-7A

915MHz, Antenna Port 3 915MHz, Antenna Port 4 Page 27 of 29 Report No.: 93870-7A

Test Setup Photos Page 28 of 29 Report No.: 93870-7A

SUPPLEMENTAL INFORMATION Measurement Uncertainty Uncertainty Value Parameter 4.73 dB Radiated Emissions 3.34 dB Mains Conducted Emissions 3.30 dB Disturbance Power The reported measurement uncertainties are calculated based on the worst case of all laboratory environments from CKC Laboratories, Inc. test sites. Only those parameters which require estimation of measurement uncertainty are reported. The reported worst case measurement uncertainty is less than the maximum values derived in CISPR 16-4-2. Reported uncertainties represent expanded uncertainties expressed at approximately the 95% confidence level using a coverage factor of k=2. Compliance is deemed to occur provided measurements are below the specified limits. Emissions Test Details TESTING PARAMETERS Unless otherwise indicated, the following configuration parameters are used for equipment setup: The cables were routed consistent with the typical application by varying the configuration of the test sample. Interface cables were connected to the available ports of the test unit. The effect of varying the position of the cables was investigated to find the configuration that produced maximum emissions. Cables were of the type and length specified in the individual requirements. The length of cable that produced maximum emissions was selected. The equipment under test (EUT) was set up in a manner that represented its normal use, as shown in the setup photographs. Any special conditions required for the EUT to operate normally are identified in the comments that accompany the emissions tables. The emissions data was taken with a spectrum analyzer or receiver. Incorporating the applicable correction factors for distance, antenna, cable loss and amplifier gain, the data was reduced as shown in the table below. The corrected data was then compared to the applicable emission limits. Preliminary and final measurements were taken in order to ensure that all emissions from the EUT were found and maximized. Page 29 of 29 Report No.: 93870-7A


Document Created: 2019-06-19 05:30:24
Document Modified: 2019-06-19 05:30:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC