Test Report

FCC ID: PJIQ15

Test Report

Download: PDF

FCCID_292832

REPORT NO : HCT-F02-1202 FCC ID : PJIQ15 DATE DECEMBER 16, 2002

TABLE OF CONTENTS

PAGE

1. GENERAL INFORMATION..................................………………………………........…....... 3
1.1 Product Description...........................…………….....……………………..............…... 3
1.2 Related submittal(s)/Grant(s)...............………………………………................….... . 3
1.3 Tested System Details............................…………………………………….................. 4
1.4 Test Methodology............................……………………………………........................ 4
1.5 Test Facility...................................…........……………………………………….......... 4
2. SYSTEM TEST CONFIGURATION........................................…………………………....... 5
2.1 Justification...............................................………………………………….………...... 5
2.2 EUT Exercise Software............................…………………………………..….............
5
2.3 Cable Description................................……………………………………...….............
2.4 Noise Suppression Parts on Cable...........……………………………............….......... 6
2.5 Equipment Modifications............................………………………………….....…...... 6
2.6 Configuration of Tested System................………………………………..................... 7
3. PRELIMINARY TESTS........................................…………………………………....…........ 8
3.1 Power line Conducted Emissions Tests...........……………………………..............… 9
3.2 Radiated Emissions Tests....................................…………………………………...… 9
4. FINAL CONDUCTED AND RADIATED EMISSION TESTS SUMMARY....................... 9
4.1 Conducted Emission Tests..............................…………………………………............ 10
4.2 Radiated Emission Tests..................................…………………………………........... 11
5. FIELD STRENGTH CALCULATION.....................………………………........................... 12
6. LIST OF TEST EQUIPMENT ………......................………………………........................... 13

ATTACHMENT A ……………………..………………….……ID Label / Location Info.
ATTACHMENT B……………………………..………….…….External Photos.
ATTACHMENT C ……………..……….………………………Block Diagram..
ATTACHMENT D ……………..……….………………………Test Setup Photos.
ATTACHMENT E …………………….…..……………………User’s Manual.
ATTACHMENT F ………………………………………………Internal Photos.

2
HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

REPORT NO : HCT-F02-1202 FCC ID : PJIQ15 DATE DECEMBER 16, 2002

1. GENERAL INFORMATION
1.1 Product Description
The ImageQuest CO., LTD. Model Q15 (referred to as the EUT in this report) is a
15" LCD Monitor HOR. Freq. 60KHz w/max. Resolution of 1024 X 768 . Product specification
information described herein was obtained from product data sheet or user's manual.

CHASSIS TYPE PLASTIC
LIST OF EACH OSC. OR
12MHz , 20MHz
XTAL. FREQ.(FREQ.≥ 1MHz)
POWER REQUIREMENT DC 12V/5V ---- 2.0A / 2.0A

MAIN BOARD 2 LAYER
OSD BOARD 2 LAYER
NUMBER OF LAYERS
POWER BOARD 2 LAYER
INVERTER BOARD 2 LAYER

MAX. RESOLUTION 1024 X 768 (@60KHz/ 75 Hz)

H-SYNC FREQUENCY RANGE 31.0KHz ∼ 60.0KHz

V-SYNC FREQUENCY RANGE 56Hz ∼ 75Hz

LCD TYPE 15" ( LCD Type NO : M150XN05 )

1.2 Related Submittal(s) / Grant(s)

ORIGINAL SUBMITTAL ONLY

3

HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

REPORT NO : HCT-F02-1202 FCC ID : PJIQ15 DATE DECEMBER 16, 2002

1.3 Tested System Details
The Model names for all equipment, plus descriptions used in the tested system
(including inserted cards) are:

DEVICE TYPE MANUFACTURER MODEL NUMBER FCC ID / DoC CONNECTED TO

IMAGEQUEST
MONITOR (EUT) Q15 PJIQ15 HOST
CO., LTD.

PC(HOST) H/P KR20803647 DoC N/A

NVIDIA GeForce
VIDEO CARD NVIDIA DoC HOST
MX 200

KEY BOARD H/P BF12502086 DoC HOST

Intellimouse optical USB
MOUSE M/S DoC HOST
and PS/2 compatible

PRINTER H/P C6410A DoC HOST

MODEM 3COM 56K FAX MODEM DoC HOST

1.4 Test Methodology

Both conducted and radiated testing were performed according to the procedures in
ANSI C63.4/1992. Radiated testing was performed at an antenna to EUT distance of
10 meters.

1.5 Test Facility

The open area test site and conducted measurement facility used to collect the radiated
data are located at the 254-1,MAEKOK-RI,HOBUP-MYUN,ICHON-SI,KYOUNGKI-DO,
467-701,KOREA. The site is constructed in conformance with the requirements of ANSI C63.4
and CISPR Publication 22. Detailed description of test facility was submitted to the Commission
and accepted dated July 24,2000(Confirmation Number: EA90661)

4

HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

REPORT NO : HCT-F02-1202 FCC ID : PJIQ15 DATE DECEMBER 16, 2002

2.SYSTEM TEST CONFIGURATION
2.1 Justification

The device was configured for testing in a typical fashion (as a customer would normally use it). During the
tests, the following components and I/O cards inside the E.U.T were used.

DEVICE TYPE MANUFACTURE MODEL/PART NUMBER

ImageQuest
MAIN BOARD 3041001038
CO., Ltd.

POWER BOARD C&C TECH CO.,LTD. 361020008703

ImageQuest
OSD BOARD 3010700802
CO., Ltd.
ImageQuest
INVERTOR BOARD 3610400254
CO., Ltd

LCD BOARD AU Optronics Corporation M150XN05

2.2 EUT exercise Software

The EUT exercise program used during radiated and conducted testing was designed to exercise the various
system components in a manner similar to a typical use. The software, contained on a 3-1/2 inch disc, was
inserted into drive A and is auto starting on power-up. Once loaded, the program sequentially exercises each
system component in turn. The sequence used is :(1) Display test, (2) RS 232 test (3) Key board test,(4)
Printer test,(5) FDD test,(6) HDD test. The complete cycle takes about 20 seconds and is repeated
continuously. As the keyboard and mouse are strictly input devices, no data is transmitted to them during
test. They are however, continuously scanned for data input activity. The video resolution modes setup and
change program was used during the radiated and conducted emission testing.

5

HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

REPORT NO : HCT-F02-1202 FCC ID : PJIQ15 DATE DECEMBER 16, 2002

2.3 Cable Description

Power Cord I/O Cable
Length (M)
Shielded (Y/N) Shielded (Y/N)
MONITOR(EUT) N Y 1.8(P), 1.5(D), 1.5(D)

PC(HOST) N N/A 1.8(P)

KEY BOARD N/A Y 2.0(D)

MOUSE N/A Y 1.8(D)

MODEM N Y 2.0(P),0.8(D)

PRINTER N Y 2.0(P),1.8(D)

The marked "(D)" means the Data Cable and "(P)" means the Power Cable.

2.4 Noise Suppression Parts on Cable. (I/O CABLE)

Ferrite Bead Metal Hood
Location Location
(Y/N) (Y/N)
MONITOR(EUT) Y BOTH END Y BOTH END
KEY BOARD N N/A Y PC END
MOUSE Y PC END Y PC END
MODEM N N/A Y BOTH END
PRINTER N N/A Y BOTH END

6

HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

REPORT NO : HCT-F02-1202 FCC ID : PJIQ15 DATE DECEMBER 16, 2002

2.5 Equipment Modifications

N/A

7

HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

REPORT NO : HCT-F02-1202 FCC ID : PJIQ15 DATE DECEMBER 16, 2002

2.6 Configuration of Test system

Line Conducted Test : EUT was connected to LISN, all other supporting equipment were
connected to another LISN.
Preliminary Power line Conducted Emission tests were performed by
using the procedure in ANSI C63.4/1992 7.2.3 to determine the worse
operating conditions.

Radiated Emission Test : Preliminary Radiated Emissions tests were conducted using the
procedure in ANSI C63.4/1992 8.3.1.1 to determine the worse operating
condition. Final Radiated Emission tests were conducted at 10 meter
open area test site.

[Configuration of Tested System]

Q15 (EUT)

HHHHHHHH
HHHHHHHH
HHHHHHHH
HHHHHHHH
HHHHHHHH

PRINTER PC(HOST) MODEM

HP895C KR14111606 56K FAX MODEM

KEY BOARD MOUSE

BF12502086 Intellimouse

8

HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

REPORT NO : HCT-F02-1202 FCC ID : PJIQ15 DATE DECEMBER 16, 2002

3. PRELIMINARY TESTS
3.1 AC Power line Conducted Emission Tests

During Preliminary Tests, the following operating mode were investigated
Processor Speed
Video Resolution (w/max) The worst operating condition
(MHz)

1024X768 (60KHz/75Hz) X

1024X768 (56.5KHz/70Hz)

Pentium 1GHz 800X600 (37.9KHz/60Hz)

800X600 (35.2 KHz/56Hz)

640X480 (31.5KHz/70Hz)

4.2 Radiated Emission Tests

During Preliminary Tests, the following operating mode were investigated

Processor Speed
Video Resolution (w/max) The worst operating condition
(MHz)
1024X768 (60KHz/75Hz) X

1024X768 (56.5KHz/70Hz)

Pentium 1GHz 800X600 (37.9KHz/60Hz)

800X600 (35.2 KHz/56Hz)

640X480 (31.5KHz/70Hz)

Tested by Kyoung-Houn SEO / Engineer Date : NOVEMBER 25, 2002

9

HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

REPORT NO : HCT-F02-1202 FCC ID : PJIQ15 DATE DECEMBER 16, 2002

4. FINAL CONDUCETD AND RADIATED EMISSION TESTS SUMMARY

4.1 Conducted Emission Test
The following table shows the highest levels of conducted emissions on both polarization of hot and
neutral line.

Humidity Level : 39% Temperature : 21℃
Limit apply to : CISPR 22
Type of Tests : CLASS B
Date : NOVEMBER 28, 2002
Result : PASSED BY 5.6 dB
EUT : 15" LCD MONITOR

Operating Condition : 1024 X 768 (Hf : 60KHz, Vf : 75Hz)
Detector : CISPR Quasi-Peak (6 dB Bandwidth : 9 KHz)
CISPR Average(6 dB Bandwidth : 9 KHz)

Line Conducted Emission Tabulated Data

Power Line Conducted Emissions CISPR 22

Frequency Amplitude Limit Margin Detector
Conductor
(MHz) (dBuV) (dBuV) (dB) Mode

3.320 40.4 NEUTRAL 46.0 5.6 Average

3.165 39.9 HOT 46.0 6.1 Average

3.415 38.8 NEUTRAL 46.0 7.2 Average

3.430 37.0 HOT 46.0 9.0 Average

Measured by : Kyoung-Houn SEO / Engineer Date : NOVEMBER 28, 2002

10

HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

REPORT NO : HCT-F02-1202 FCC ID : PJIQ15 DATE DECEMBER 16, 2002

4.2 Radiated Emissions Tests

The following table shows the highest levels of Radiated Emissions on both polarization of
horizontal and vertical.

Humidity Level : 44 % Temperature : 20 ℃
Limit apply to : CISPR 22
Type of Tests : CLASS B
Date : DECEMBER 3, 2002
Result : PASSED BY -3.0dB
====================================================================================
EUT : 15" LCD MONITOR
Operating Condition : 1024 X 768 (Hf :60 kHz, Vf : 75 Hz)
Detector : CISPR Quasi-Peak (6 dB Bandwidth : 120 KHz)
Frequency Reading Ant. Factor Cable Loss ANT POL Total Limit Margin
MHz dBuV dB dB (H/V) dBuV/m dBuV/m dB

74.6 17.89 5.91 1.80 V 25.6 30.0 -4.4

144.8 5.96 14.64 2.50 V 23.1 30.0 -6.9

156.9 7.43 14.77 2.60 V 24.8 30.0 -5.2

169.1 7.90 14.90 2.70 V 25.5 30.0 -4.5

201.5 8.17 15.83 3.00 H 27.0 30.0 -3.0

229.8 4.21 17.19 3.30 V 24.7 30.0 -5.3

382.3 11.76 16.54 4.20 V 32.5 37.0 -4.5

408.5 10.04 16.66 4.20 H 30.9 37.0 -6.1

433.0 10.23 17.07 4.50 V 31.8 37.0 -5.2

454.0 10.85 17.75 4.70 V 33.3 37.0 -3.7

461.0 7.04 17.86 4.80 V 29.7 37.0 -7.3

487.3 9.85 18.15 4.80 V 32.8 37.0 -4.2

NOTE:
1.All video modes and resolutions were investigated and the worst-case emissions are reported.

Measured by Kyoung-Houn SEO / Engineer Date : DECEMBER 3 , 2002

11

HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

REPORT NO : HCT-F02-1202 FCC ID : PJIQ15 DATE DECEMBER 16, 2002

5. Field Strength Calculation

The field strength is calculated by adding the Antenna Factor and Cable Factor.
The basic equation with a sample calculation is as follows:

FS = RA + AF + CF

where FS = Field Strength

RA = Receiver Amplitude

AF = Antenna Factor

CF = Cable Attenuation Factor

Assume a receiver reading of 21.5 dBuV is obtained. The Antenna Factor of 7.4 and a Cable Factor of 1.1
is added. The 30 dBuV/m value was mathematically converted to its corresponding level in uV/m.

FS = 21.5 + 7.4 + 1.1 = 30 dBuV/m

Level in uV/m = Common Antilogarithm [(30 dBuV/m)/20] = 31.6 uV/m

12

HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

Document Created: 2002-12-20 15:24:19
Document Modified: 2002-12-20 15:24:19

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC