User Manual

FCC ID: PJIP278DPL

Users Manual

Download: PDF
FCCID_3913562

27” UHD Wide LED Monitor User Manual

Precautions Precautions Warning The following information will help you avoid the risk of electric shock, serious injury or death. Power cord AC outlet Do not allow any object or liq- Do not attempt to disassemble, The socket-outlet shall be uid to enter inside the monitor. fix or modify the monitor. installed near the equipment There is the risk of electric There is the risk of electric and shall be easily accessible. shock, fire or damage to the shock or fire. Plug the power cord into a If you hear a noise or smell Do not overload an electrical monitor. properly grounded outlet. smoke from the computer or outlet with too many devices. There is the risk of electric adaptor, unplug the power cord There is the risk of fire. shock. immediately, and call the service center. There is the risk of elec- tric shock or fire. Caution The following information will help you avoid the risk of minor or moderate injury or damage to the monitor. Do not unplug from the outlet Do not bend the power cord Do not use a damaged power Use a proper voltage/current Do not clean the LCD with Do not scratch and damage by pulling the power cord or excessively nor place heavy objects cord or plug. Make sure the level indicated abrasive chemicals. the LCD with sharp objects. when your hands are wet. on it. Keep children and pets away plug fits snugly into the outlet. There is the risk of damage to There is the risk of electric from the power cord as they may There is the risk of electric the LCD. shock or fire. damage the power cord. There is shock or fire. the risk of electric shock or fire. Do not expose the monitor to Keep the monitor away from high Do not block the fan louvers. Keep the monitor away from Place the monitor on a flat, sta- Unplug the power cord when the direct sun light. temperature, humidity, and dust. There is the risk of fire or dam- objects and electrical appli- ble surface. The monitor may the monitor is not in use for a Operating environment age to the monitor. ances that may generate elec- fall and there is the risk of long period of time. =10~40degrees Celsius tromagnetic fields. damage or injury. Operating environment =20~80relative humidity. The socket - outlet shall be installed near the equipment and shall be easily accessible.

After assemble pedestal Stand at stand body, assemble LCD Monitor screw to driver. Adapter Jack DVI Dual link DVI Cable Power Cord Adapter Display port Cable HDMI2(MHL) HDMI Cable 1.4 HDMI1 HDMI Cable 2.0 Display Port DP Cable Headphone out Install CD / Quick Guide

Button Function description Hot key setting 1. Press the “MENU” button to bring up the screen. 2. Press the " , " buttons to select the main option. MENU Opens OSD Menu window. 3. Press the " " button after selecting the main option. 4. Bring up the sub-menu. Use the " , " buttons to select the desired option. Moves left icon choice bar. 5. Press the " " button after selecting the desired sub-menu option. Decreases value of chosen icon. Volume(Option) 6. Use the " , " buttons to adjust the set value. Moves Right icon choice bar. 7. Pressing the " " button Three times saves and exits the setting mode. Increases value of chosen icon. Mute(Option) * Pressing the " " button moves back to the previous menu. Chooses Sub icons of the Menu. Main Menu Main Menu SUB Menu Function ICON Exits from icons of the Menu. Source Information Backlight Adjusts the Backlight of the screen. Brightness Adjusts the Brightness of the screen. Picture Changes Input Signal. Defalult : Auto Contrast Adjusts the Contrast of the screen. Shapness Adjusts the Sharpness of outlines. Turns On/off Monitor. Gamma Adjusts the accuracy of image . Temperature Selects Warm or Cool colors suitable for video type. Color Effect Chooses optimum color condition by type of videos. Indicates monitor's state. Color Demo Unsupported. State lamp On Mode : Blue Color format Controls the Color format of the color. ( RGB or YUV ) No signal Message : RED PCM To compensate the image qulity. Hue Adjusts the proportions of green and red. Standby Mode : Blue & RED Saturation Adjusts the Density of color. Soft Power Off : LED Off Aspect Ratio Selects the screen ratio. ( Full , 16:9 , 4:3 , 5:4 , 1:1 ) Advance Over Scan Selects the screen size. ( Used in case of DTV timing. ) Over Drvie Adjusts response time of Panel. DP Option Selects the version of DP signal.( Normal : 1.2 ) Auto Select Selects the input signal. ( Normal : Auto Select ) Input DP DP / HDMI 1 : 3840 × 2160@60Hz HDMI 1 HDMI2 / DVI : 3840 × 2160@30Hz MHL(HDMI 2) DVI Reset User setting values returns to factory setting values. Other Menu Time Adjusts OSD display time on the screen. OSD H Position Adjusts OSD screen left or right. OSD V Position Adjusts OSD screen upwards or downwards. Language Selects OSD language.(2 language) Transparency Adjusts transparency of the OSD window. Rotate Adjusts rotation of the OSD window. ( 0 , 90 , 270 ) Information Displays the information of present signal. Signal : ( D0 : DP ) Resolution : ( 3840 × 2160@60Hz ) Frequency : ( H : 133.5Khz PCLK : 533.5Mhz )

Resolution Horizontal Frequency Vertical Frequency 800 x 600 37.879 kHz 60 Hz 1024 x 768 48.363 kHz 60 Hz 1280 x 1024 63.981 kHz 60 Hz 1920 x 1080 67.5 kHz 60 Hz 1920 x 1200 74.099 kHz 60 Hz 2560 x 1440 88.8 kHz 60 Hz 3840 x 2160 67.5 kHz 30 Hz 3840 x 2160 133.5 kHz 60 Hz 480p 50/60 HDCP (DP,HDMI, DVI) 576p 50/60 720p 50/60 1080p 50/60 State Power Consumption LED Color Under 45 W (Max.) ON Blue Under 32 W (Typ.) DPMS Less than 0.5w Blue + RED OFF Less than 0.5w LED off 8 9

27 UHD Wide 596.16mm(H) x 335.34mm(V) 155.25um(H) x 155.25um(V) 3840 x 2160@60Hz 178º / 178º (H/V) 1.07 Billion 300 12 ms 31 ~ 133.5KHz 56 ~ 75Hz DVI , HDMI 1(60Hz) , HDMI 2(30Hz) , Disply port(60Hz) 29pin DVI, 19Pin HDMI, 20Pin Display port 45W (Max), 32W (Typ) 0.5W AC : 110V~240V 50/60Hz 1.5A , DC : 24Vdc, 5A Yes(Option) , Headphone out(Option) 10 11

FCC compliance MODEL: P278DPL -)&&,'3-,3'3/  Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ㆍReorient or relocate the receiving antenna. ㆍIncrease the separation between the equipment and receiver. ㆍConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ㆍConsult the dealer or an experienced radio/TV technician for help. Change or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment under FCC rules. 12


Document Created: 2018-07-05 14:38:04
Document Modified: 2018-07-05 14:38:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC