Class II Permissive Change Letter

FCC ID: PJIL17C0D081

Cover Letter(s)

Download: PDF
FCCID_453421

                                    FCC ID : PJIL17C0D081




JULY 15, 2004
Federal Communications Commission
Equipment Approval Services
7435 Oakland Mills Road
Columbia, MD 21046


             SUBJECT         : Hyundai ImageQuest Co., Ltd.
                               FCC ID: PJIL17C0D081
                              Class II permissive change
                                     Orig. Grant Date: October 17, 2002
Gentlemen:

Transmitted herewith, on behalf of Hyundai ImageQuest Co., Ltd. is an application
for a Class II Permissive Change Certification of the following 17-inch LCD
Monitor:

                            FCC ID :     PJIL17C0D081
                       Model/Type : Q17/ L17C0D081

The device is identical to the previously certified monitor except for the following:


  1. Original LCD Panel
      (Manufacture: Hyundai Display Technology INC, Model No.: HT17E11-300)
    Alternate LCD Panel
      (Manufacture : SAMSUNG Electronics Model No.: LTM170EU-L11)

Attached is the applicant’s Cover Letter, External/Internal Photos, Test Set-Up
Photos, FCC ID & Label Location, User Manual, Block Diagram and Test Report.

Should you have any questions or comments concerning the above, please contact the
undersigned.




KI SOO KIM
EMC MAMAGER

cc: Mr. HEE JUNG KIM ------- R & D CENTER / MANAGER

REPORT NO. : HCT-F04-0715              HYUNDAI C–TECH                       1/3


                                     FCC ID : PJIL17C0D081




• Solution    for EMI

We, Hyundai ImageQuest CO.,LTD. , announce that all modifications
will be incorporated into each unit sold in the U.S.


1. Apply a ferrite Core to the Power Cable
2. Attach a aluminum foil between Main Frame and LCD panel
3. Attach a gasket to stand connector

(Please refer to next page of the photographs for Solution for EMI)




                                                                      Hyundai
                                    ImageQuest CO.,LTD.

                                               2004.7.15

                                             R & D CENTER / MANAGER
                                                 HEE JUNG KIM




REPORT NO. : HCT-F04-0715              HYUNDAI C–TECH                     2/3


                                   FCC ID : PJIL17C0D081




   1. Apply a ferrite Core to the Power Cable




  2. Attach a aluminum foil between Main Frame and LCD panel




   3. Attach a gasket to stand connector




REPORT NO. : HCT-F04-0715            HYUNDAI C–TECH            3/3



Document Created: 2004-07-26 19:45:03
Document Modified: 2004-07-26 19:45:03

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC