Test Report

FCC ID: PJIL17A0D080

Test Report

Download: PDF
FCCID_600233

HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. Product Compliance Division, EMC Team SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI, KYOUNKI-DO, 467-701, KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 CERTIFICATION Manufacture; Date of Issue : September 12, 2005 HYUNDAI IMAGEQUEST CO., LTD. Test Report No.: HCT-F05-0908 SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI, KYOUNKI-DO, 467-701,KOREA Test Site: HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. HYUNDAI IMAGEQUEST FRN : 0005-8664-39 HCT FRN : 0005-8664-21 FCC ID : PJIL17A0D080 MODEL /TYPE: L70S/L17A0D080 Rule Part(s): Part 15 & 2 Equipment Class: FCC Class B Peripheral Device (JBP) Standard(s): FCC Class B: (CISPR 22) EUT Type: 17” LCD MONITOR Max. Resolution(s): 1280 X 1024 (@/75Hz) Model(s): L70S Port/Connector(s) 15-pin D-sub VGA connector, AUDIO IN/OUT LCD Panel BOE HYDIS(HT170E01-101) This equipment has been shown to be in compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-2003 I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Report prepared by : Ki-Soo Kim Manager of EMC Tech. Part ▷▷ HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. ◁◁◁ 1/20

FCC ID : PJIL17A0D080 TABLE OF CONTENTS PAGE REPORT COVER 1 TABLE OF CONTENTS 2 1.1 SCOPE 3 2.1 INTRODUCTION (SITE DESCRIPTION) 4 3.1 PRODUCTION INFORMATION 5-6 4.1 DESCRIPTION OF TESTS (CONDUCTED) 7 4.3 DESCRIPTION OF TESTS (RADIATED) 8 5.1 LIST OF SUPPORT EQUIPMENT 9-10 6.1 TEST DATA (CONDUCTED) 11-15 7.1 TEST DATA (RADIATED) 16 8.1 SAMPLE CALCULATIONS 17 9.1 TEST EQUIPMENT 18 10.1 TEST SOFTWARE USED 19 11.1 CONCLUSION 20 ATTACHMENT A : EXTERNAL PHOTOGRAPHS ATTACHMENT B : TEST SETUP PHOTOGRAPHS ATTACHMENT C : INTERNAL PHOTOGRAPHS HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 2/21

FCC ID : PJIL17A0D080 MEASUREMENT REPORT 1.1 Scope Measurement and determination of electromagnetic emissions (EME) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission. Applicant Name: HYUNDAI IMAGEQUEST Address: SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI, KYOUNKI-DO, 467-701,KOREA • FCC ID : PJIL17A0D080 • Equipment Class: FCC Class B Peripheral Device (JBP) • EUT Type: 17” LCD MONITOR • Model(s): L70S • Max. Resolution: 1280 X 1024 (@75Hz) • Power Cord: Unshielded • Rule Part(s): FCC Part 15 Subpart B • Test Procedure(s): ANSI C63.4 (2003) • Dates of Tests: October 17, 2005 ~October 19, 2005 • Place of Tests: 254-1,MAEKOK-RI,HOBUP-MYUN,ICHON-SI,KYOUNGKI-DO,467-701,KOREA HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 3/21

FCC ID : PJIL17A0D080 2.1 INTRODUCTION The measurement procedure described in American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz (ANSIC63.4-2001) was used in determining radiated and conducted emissions emanating from HYUNDAI IMAGEQUEST CO.,LTD. 17-inch LCD Monitor FCC ID: PJIL17A0D080 The open area test site and conducted measurement facility used to collect the radiated data are located at the 254-1, MAEKOK-RI,HOBUP-MYUN,ICHON-SI,KYOUNGKI-DO, 467-701,KOREA. The site is constructed in conformance with the requirements of ANSI C63.4and CISPR Publication 22. Detailed description of test facility was submitted to the Commission and accepted dated July 23,2003 (Confirmation Number: EA90661) HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 4/21

FCC ID : PJIL17A0D080 3.1 PRODUCT INFORMATION 3.2 Equipment Description Equipment Under Test (EUT) is the HYUNDAI IMAGEQUEST CO.,Ltd. ( Model : L70S ) 17-inch LCD Monitor FCC ID: : PJIL17A0D080 Maximum Resolution(s): 1280 X 1024 (@80.0KHz/ 75Hz) Frequency Range(s): H-Sync: 31KHz – 80KHz V-Sync: 56Hz – 75 Hz Pixel Pitch: 0.264mm Power Supply: AC 100-240V 60/ 50Hz 1.0A Power Cord: Unshielded AC power cord Port(s)/Input Connector(s): 15-pin D-sub VGA connector, Audio In/Out Cable(s): Shielded D-Sub (with ferrite on both ends), Audio cable(with ferrite on both ends) Dimensions (WxHxD): 396x414x200mm (WxHxD) Weight (Net):3.7Kg unpacked EMI Suppression Devices: Modifications were made to the device. Please refer to the next page. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 5/21

FCC ID : PJIL17A0D080 1. Attach aluminum tape on the frame 2. Apply a ferrite core to the OSD Cable HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 6/21

FCC ID : PJIL17A0D080 4.1 Description of Tests(Conducted) 4.2 Powerline Conducted RFI (150kHz- 30MHz) The power line conducted RFI measurements were performed according to CISPR 22. The EUT was placed on a non-conducting 1.0 by 1.5 meter table which is 0.8 meters in height and 0.40 meters away from the vertical wall of the shielded enclosure. Power to the EUT is provided through a Rohde & Schwarz 50 Ω / 50 uH Line Impedance Stabilization Network (LISN) and the support equipment through a separate Solar 50 Ω / 50 uH Line- Conducted Test Facility LISN. Sufficient time for the EUT, support equipment, and test equipment were allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the spectrum analyzer to determine the frequency producing the maximum EME. The spectrum was scanned from 150kHz to 30 MHz. Each maximum EME was remeasured using an EMI receiver. The detector function of the receiver was set to CISPR quasi- peak and average mode with the bandwidth set to 9 kHz. Each emission was maximized consistent with the typical applications by varying the configuration of the test sample. Interface cables were connected to the available interface ports of the test unit. The effect of varying the position of cables was investigated to find the configuration that produces maximum Diagram emission. Excess cable lengths were bundled at the center with 30- 40cm. in length. The worst-case configuration is noted in the test report and the photographs are attached. Each EME reported was calibrated using the Rohde & Schwarz SMX signal generator and are listed on Table 1. RFI Conducted FCC Class B CISPR 22 CLASS B RFI CONDUCTED Limits dB(uV/m) CISPR 22 CISPR 22 Freq. Range Quasi-Peak Average 150kHz - 0.5MHz 66-56** 56-46** 0.5MHz - 5MHz 56 46 5MHz - 30MHz 60 50 **Limits decreases linearly with the logarithm of frequency Table 1. RFI Conducted Limits HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 7/21

FCC ID : PJIL17A0D080 4.3 Description of Tests(Radiated) Radiated Emissions Preliminary measurements were made indoors at 1 meter using broadband antennas, broadband amplifier, and spectrum analyzer to determine the frequency producing the maximum EME. Appropriate precaution was taken to ensure that all EME from the EUT were maximized and investigated. The spectrum was scanned from 30 to 300 MHz using biconical antenna, 300 to 1000 MHz using log- periodic antenna, and above 1 GHz using linearly polarized horn antennas. Final measurements were made outdoors at 10- meter test range using Dipole antennas and EMI receiver. For frequencies above 1 GHz, horn antennas were used. Sufficient time for the EUT, support equipment, and test equipment were allowed in order for them to warm up to their normal operating condition. The EMI receiver detector function was set to CISPR quasi-peak mode and the bandwidth of the receiver was set to 120 kHz. The EUT, support equipment, and interconnecting cables were arranged to the configuration that produces the maximum EME emission found during preliminary scan. The turntable containing the system was rotated; the antenna height was varied 1 to 4 meters and stopped at the azimuth or height producing the maximum emission. Horizontal and vertical antenna polarizations were checked. Each emission was maximized by: varying the mode of operation or resolution; clock or data exchange speed; scrolling H pattern to the EUT and/ or support equipment, and powering the monitor the computer aux AC outlet, if applicable; and changing the polarity of the antenna, whichever determined the worst-case emission. ITE Radiated Limits Frequency FCC Limit @ FCC Limit @ CISPR Limit @ (MHz) 3m. Quasi- 10m.* Quasi – 10m. Quasi-Peak Peak dB[μV/m] Peak dB [μV/m] dB [μV/m] 30-88 40.0 29.5 30.0 88-216 43.5 33.0 30.0 216-230 46.0 35.6 30.0 230-960 46.0 35.6 37.0 960-1000 54.0 43.5 37.0 > 1000 54.0 43.5 No Specified Limit * Limit extrapolated 20 dB/decade Table 2. Radiated Class B limits @ 10-meters HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 8/21

FCC ID : PJIL17A0D080 5.1 Support Equipment Used DEVICE TYPE MANUFACTURER MODEL NUMBER FCC ID / DoC CONNECTED TO HYUNDAI IMAGEQUEST MONITOR (EUT) L70S PJIL17A0D080 P.C CO., LTD. P.C H/P HP Pavilion 8921 DoC EUT Mouse DELL MO56UO DoC P.C Serial Mouse Logitech M-M28 DoC P.C Key Board H/P 5181 DoC P.C Printer H/P C4569A DoC P.C Head-set HYUNDAI JPC-914MV DoC EUT HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 9/21

FCC ID : PJIL17A0D080 5.2 Cable Description Power Cord I/O Cable Shielded Length (M) Shielded (Y/N) (Y/N) Power N N/A 1.8(P) D Sub N/A Y 1.8(D) LCD Monitor (EUT) Audio in N/A Y 1.8(D) Audio out N/A Y 2.7(D) PC N N/A 1.8(P) Key Board N/A Y 1.8(D) Mouse N/A Y 1.8(D) Serial Mouse N/A Y 1.8(D) Printer N Y 1.8(P,D) The marked "(D)" means the Data Cable and "(P)" means the Power Cable. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 10/21

FCC ID : PJIL17A0D080 5.3 Noise Suppression Parts on Cable. (I/O CABLE) Ferrite Bead Metal Hood Location Location (Y/N) (Y/N) D Sub Y BOTH END Y BOTH END LCD Monitor (EUT) Audio in Y BOTH END Y BOTH END Audio out N N/A Y PC END PC N/A N/A N/A N/A Key Board N N/A Y PC END Mouse N N/A Y PC END Serial Mouse N N/A Y PC END Printer N N/A Y BOTH END HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 11/21

FCC ID : PJIL17A0D080 6.1 LINE-CONDUCTED TEST DATA HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 12/21

HCT mas Iimienscrntiten EasUREmENT RESULT: "LCD MONTTORfin AV" 10/27/2008 4:209m Frequency mevel Transd Limit Margin Line PB raie abay as aray an 0.197600 a2.60 20.1 s1 — 0.20s100 36 10.1 so — o.se7e00 s3.90 10.1 as — 1.s80000 s9.50 10.3 as — 1.980000 sa.10 10.3 «6 2.475000 as.zo 10.3 15 7.330000 so.40 10.3 so 13.ees000 39.30 10.5 so 13.9e5000 20.10 10.3 so <n en Page 2/2.. 10/17/2005. as2om Hior Rhc tas

HCT sceiti HCT Euc meer zas surs mos Manufactuzes : mumoaz mmmongusen Operating Condition: 1280 % 1024 7S%z shremn roox 6s, m Test specification: crser 22 ciass s Corments n CaN TaBLE: "CIGPR 22 Voltage" Short bescription: ciSeR 22 voltage start Stop step Detector Meas. IF Transducer Frequeney Frequeney Width Time Bandu. 150.1 kite 500.0 kite 2.5 kiz MaxPeak 10.0 me 9 kite None Average 500.0 kate 5.0 imte 5.0 kiz MaxPeak 10.0 ms 9 kte None Average 5.0 mete 30.0 itz 5.0 kiz MaxPeak 10.0 ms 9 kz None Average tentoann s m a © a m io o Sn un mone rom m an m on i on. row Ton sou — Frmacey it hn NB ie B muage mNEE e m m i2 2 RMAREN PHoLn MEASUREMENT RESUZT: "ICD MONTTORfin oP" 10/17/2005 «:279 Frequency Level Transd Iimit Margin Line 9E wate asay db dawr ce o.r97e00 s3a0 do.1 s1 ro.s a.zs7e00 43.30 10.1 so reca 0.327e00 sp.e0 20.1 se r9.3 4.060000 45.20 10.2 se 10.8 4.160000 ai.60 10.3 se ind 4.558000 43.90 10.3 se 124 7.725000 4s.90 10.3 so da d 7.e25000 45.60 10.4 so dala ——— 8.220000 44.00 10.4 s0 isk ——— ——— Page 1/2 20/27/2008. asi7em net ahc ns

HCT mas Iimienscrntiten »EasUREMENT RESULT: "LCD MONITORfin AV" 10/27/2008 a:27zm Frequency tevel. Transd Mimit Margin Line PE mt douy ds dayy as 6.197600 46270 10.1 sa o.297600 31.30 10.1 so o.397600 s2.70 10.1 4a 2.475000 39.30 10.3 46 4.060000 40.70 20.3 46 4.1e0000 40.40 10.3 46 7.230000 ss.60 10.3 so 7.330000 38.80 10.3 5o 7.525000 se.s0 10.3 so Page 2/2 10/17/2005. «:i7em nor mnc tms

FCC ID : PJIL17A0D080 NOTES: 1. All modes of operation were investigated and the worst-case emissions are reported. 2. The CISPR RFI conducted limits are listed on Table 1 (Page 7). 3. Line H = Phase Line N = Neutral Line ** Measurements using CISPR quasi-peak mode. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 16/21

FCC ID : PJIL17A0D080 7.1 RADIATED TEST DATA Frequency Reading Ant. Factor Cable Loss ANT POL Total Limit Margin MHz dBuV dB/m Db (H/V) dBuV/m dBuV/m dB 48.3 4.3 12.3 1.5 V 18.1 30.0 11.9 84.8 12.3 7.7 2.0 V 22.0 30.0 8.0 124.6 4.8 11.8 2.6 V 19.2 30.0 10.8 138.1 7.3 12.7 2.6 V 22.6 30.0 7.4 194.8 7.6 10.1 3.1 H 20.8 30.0 9.2 208.6 6.0 9.9 3.3 V 19.2 30.0 10.8 237.5 8.0 10.9 3.5 V 22.4 37.0 14.6 285.1 13.7 12.5 3.9 H 30.1 37.0 6.9 301.7 13.9 13.1 4.0 H 31.0 37.0 6.0 328.3 10.6 13.5 4.2 V 28.3 37.0 8.7 364.4 9.5 14.2 4.4 V 28.1 37.0 8.9 421.7 9.1 15.8 4.7 H 29.6 37.0 7.4 Radiated Measurements at 10-meters. 1280 X 1024 (@75Hz) NOTES: 1. All modes of operation were investigated, and the worst-case emissions are reported. 2. The radiated limits are listed on Table 2 (Page 8). ** AFCL = Antenna Factor (Roberts dipole) and Cable Loss . *** Measurements using CISPR quasi-peak mode. Above 1GHz, peak detector function mode is used using a resolution bandwidth of 1MHz and a video bandwidth of 1MHz. The peak level complies with the average limit. Peak mode is used with linearly polarized horn antenna and low-loss microwave cable. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 17/21

FCC ID : PJIL17A0D080 8.1 Sample Calculations dB ㎶ = 20 log 10 (mV/m) 8.2 Example 1: @ 197.6 KHz Class B limit = 63.7 dB ㎶ Reading = 53.1 dB ㎶ (calibrated level) Margin = 53.1 – 63.7 = - 10.6 dB ㎶ = 10.6 dB below limit 8.3 Example 2: @ 301.7 MHz Class B limit = 37 dB ㎶/m Reading = 13.9 dB ㎶/m (calibrated level) Antenna Factor + Cable Loss = 17.1 dB Total = 31.0 dB ㎶/m Margin = 31.0 - 37.0 = - 6.0 = 6.0 dB below limit HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 18/21

FCC ID : PJIL17A0D080 9.1 Test Equipment Type Manufacture Model Number CAL Due Date EMI Test Receiver Rohde & Schwarz ESCI40 2005.11.16 EMI Test Receiver Rohde & Schwarz ESVS30 2006.07.01 EMI Test Receiver Rohde & Schwarz ESCI 2006.09.13 LISN Rohde & Schwarz ESH2-Z5 2006.04.26 Attenuator Rohde & Schwarz ESH3-Z2 2005.11.16 TRILOG Antenna Schwarzbeck 9160 2006.03.31 Antenna Position Tower HD MA240 N/A Turn Table EMCO 1050 N/A Power Analyzer Voltech PM 3300 2006.03.22 Reference Network Impedance Voltech IEC 555 N/A AC Power Source PACIFIC Magnetic Module N/A AC Power Source PACIFIC 360-AMX 2005.11.25 Controller HD GmbH HD 100 N/A SlideBar HD GmbH KMS 560 N/A PULSE LIMITER Rohde & Schwarz ESH3-Z2 2005.11.16 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 19/21

FCC ID : PJIL17A0D080 10.1 Test Software Used The EUT exercise program used during radiated and conducted testing was designed to exercise the various system components in a manner similar to a typical use. The software, contained on a 3-1/2 inch disc, was inserted into drive A and is auto starting on power-up. Once loaded, the program sequentially exercises each system component in turn. The sequence used is :(1) Display test, (2) RS 232 test (3) Key board test,(4) Printer test,(5) FDD test,(6) HDD test. The complete cycle takes about 20 seconds and is repeated continuously. As the keyboard and mouse are strictly input devices, no data is transmitted to them during test. They are however, continuously scanned for data input activity. The video resolution modes setup and change program was used during the radiated and conducted emission testing. NOTE: This is a sample of the basic program used during the test. However, during testing, a different software program may be used; whichever determines the worst-case condition. In addition, the program used also depends on the number and type of devices being tested. Actual program used is the “H” pattern in Notepad under Windows environment. All resolution modes (1280x1024, 1024x768, 800x600, 640x480, 720x400) were investigated and tested HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 20/21

FCC ID : PJIL17A0D080 11.1 Conclusion The data collected shows that the HYUNDAI IMAGEQUEST CO., LTD. 17-inch LCD Monitor FCC ID:PJIL17A0D080 complies with §15.107 and §15.109 of the FCC Rules. HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr Report No. : HCT-FO5-0908 21/21


Document Created: 2005-11-02 10:34:30
Document Modified: 2005-11-02 10:34:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC