test report

FCC ID: PIYB6453-03A4R

Test Report

Download: PDF
FCCID_321052

TEST REPORT Report No. : AD003269-1 Date : 2003 April 16 Client : Mattel Asia Pacific Sourcing Limited 13/F., South Tower, World Finance Center, Harbour City, Tsimshatsui, Kowloon, Hong Kong. Sample Description : One(1) submitted sample stated to be Mattel item : TMH Vertigo of Model No. B6453. Rating : 1 x 7.2 V, NiCd type rechargeable battery No. of sample(s) : Two(2) pieces *** Date Received : 2003 March 03. 2003 April 03. Test Period : 2003 March 03 – 2003 March 06. 2003 April 03 – 2003 April 04. Test Requested : FCC Part 15 Certification Test Method : FCC Rules and Regulations Part 15 – May 2002 ANSI C63.4 – 1992 Test Result : See attached sheet(s) from page 2 to 11. Conclusion : The submitted sample was found to comply with requirement of FCC Part 15 Subpart B. For and on behalf of CMA Testing and Certification Laboratories Authorized Signature : Page 1 of 11 Danny Chui EMC Engineer - EL. Division FCC ID : PIYB6453-03A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AD003269-1 Date : 2003 April 16 Table of Contents 1 General Information ........................................................................................................................ 3 1.1 General Description.................................................................................................................. 3 1.2 Related Submittal Grants .......................................................................................................... 3 1.3 Location of the test site ............................................................................................................. 4 1.4 List of measuring equipment ..................................................................................................... 5 2 Description of the radiated emission test .......................................................................................... 6 2.1 Test Procedure ......................................................................................................................... 6 2.2 Test Result............................................................................................................................... 6 2.3 Radiated Emission Measurement Data ....................................................................................... 7 2.3 Radiated Emission Measurement Data ....................................................................................... 8 3 Description of the Line-conducted Test ............................................................................................ 9 3.1 Test Procedure ......................................................................................................................... 9 3.2 Test Result............................................................................................................................... 9 3.3 Graph and Table of Conducted Emission Measurement Data ...................................................... 9 4 Photograph ................................................................................................................................... 10 4.1 Photographs of the Test Setup for Radiated Emission and Conduction Emission ........................ 10 4.2 Photographs of the External and Internal Configurations of the EUT ......................................... 10 5 Supplementary document ............................................................................................................... 10 5.1 Bandwidth ............................................................................................................................. 10 6 Appendices.................................................................................................................................... 11 Page 2 of 11 FCC ID : PIYB6453-03A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AD003269-1 Date : 2003 April 16 1 General Information 1.1 General Description The equipment under test (EUT) is a superregenerative receiver for TMH Vertigo operating at 49.860 MHz which is controlled by a crystal. The EUT is powered by 7.2 V NiMH battery pack. The EUT receive the signal from transmitter for move forward, backward, left and right direction. The brief circuit description is saved with filename : OpDes.pdf 1.2 Related Submittal Grants This is a single application for certification of a receiver. The transmitter for this receiver is authorized by Certification procedure. Page 3 of 11 FCC ID : PIYB6453-03A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AD003269-1 Date : 2003 April 16 1.3 Location of the test site Radiated emissions measurements are investigated and taken pursuant to the procedures of ANSI C63.4 – 1992. An Open Area Testing Site is set up for investigation and located at : Top of the Roof, Yan Hing Centre, 9 – 13 Wong Chuk Yeung Street, Fo Tan, Shatin, New Territories, Hong Kong. Conducted emissions measurements are investigated and also taken pursuant to the procedures of ANSI C63.4 – 1992. A double shielded room is located at : Roof Floor, Yan Hing Centre, 9 – 13 Wong Chuk Yeung Street, Fo Tan, Shatin, New Territories, Hong Kong. Page 4 of 11 FCC ID : PIYB6453-03A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AD003269-1 Date : 2003 April 16 1.4 List of measuring equipment Calibration Equipment Manufacturer Model No. Serial No. Certification Calibration Calibration No. Date Due Date EMI Test Receiver R&S ESCS30 100001 S21141 Dec. 19, 2002 Dec. 18, 2003 Broadband Antenna Schaffner CBL6113B 2718 AC1753 Dec. 15, 2000 Jun. 14, 2003 Signal Generator IFR 2023B 202302/938 Nil Oct. 23, 2000 Apr. 22, 2003 LISN R&S ESH3-Z5 100038 S21142 Dec. 19, 2002 Dec. 18, 2003 Pulse Limiter R&S ESH3-Z2 100001 20-73194 May 2, 2001 May 1, 2003 Biconical Antenna R&S HK116 837414/004 4000.7752.02 Oct. 23, 2000 Apr. 22, 2003 Page 5 of 11 FCC ID : PIYB6453-03A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AD003269-1 Date : 2003 April 16 2 Description of the radiated emission test 2.1 Test Procedure Radiated emissions measurements are investigated and taken pursuant to the procedures of ANSI C63.4 – 1992. The equipment under test (EUT) was placed on a non-conductive turntable with dimensions of 1.5m x 1m and 0.8m high above the ground. 3m from the EUT, a broadband antenna mounting on the mast received the signal strength. The turntable was rotated to maximize the emission level. The antenna was then moving along the mast from 1m up to 4m until no more higher value was found. Both horizontal and vertical polarization of the antenna were placed and investigated. A signal generator was used to radiate an unmodulated continuous wave (CW) signal to the EUT (superregenerative receiver) at its operating frequency in order to “cohere” the characteristic broadband emissions from the receiver. 2.2 Test Result The emissions meeting the requirement of section 15.109 are based on measurements employing the CISPR qusai-peak detector. It was found that the EUT meet the FCC requirement. Page 6 of 11 FCC ID : PIYB6453-03A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AD003269-1 Date : 2003 April 16 2.3 Radiated Emission Measurement Data Radiated emission pursuant to the requirement of FCC Part 15 subpart B Frequency Polarity Reading at 3m Antenna and Field Strength Limit at 3m Margin (MHz) (H/V) (dBµV/m) Cable factor (dBµV/m) (dBµV/m) (dB) (dB) 45.893 H 12.2 11.4 23.6 40.0 -16.4 47.025 H 11.5 11.4 22.9 40.0 -17.1 51.451 H 15.4 8.9 24.3 40.0 -15.7 52.997 H 18.7 8.9 27.6 40.0 -12.4 91.016 H 11.8 10.0 21.8 43.5 -21.7 96.523 H 12.8 10.0 22.8 43.5 -20.7 151.280 H 13.6 11.5 25.1 43.5 -18.4 Page 7 of 11 FCC ID : PIYB6453-03A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AD003269-1 Date : 2003 April 16 2.3 Radiated Emission Measurement Data Radiated emission pursuant to the requirement of FCC Part 15 subpart B Frequency Polarity Reading at 3m Antenna and Field Strength Limit at 3m Margin (MHz) (H/V) (dBµV/m) Cable factor (dBµV/m) (dBµV/m) (dB) (dB) 32.568 H 11.7 18.9 30.6 40.0 -9.4 38.118 H 6.2 18.9 25.1 40.0 -14.9 42.667 H 12.4 13.4 25.8 40.0 -14.2 48.964 H 8.5 13.4 21.9 40.0 -18.1 52.777 H 13.9 8.9 22.8 40.0 -17.2 55.169 H 12.8 8.9 21.7 40.0 -18.3 64.065 H 12.2 6.4 18.6 40.0 -21.4 Page 8 of 11 FCC ID : PIYB6453-03A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AD003269-1 Date : 2003 April 16 3 Description of the Line-conducted Test 3.1 Test Procedure Conducted emissions measurements are investigated and also taken pursuant to the procedures of ANSI C63.4 – 1992. The EUT was setup as described in the procedures, and both lines were measured. 3.2 Test Result No measurement is required as the EUT is a battery-operated product. 3.3 Graph and Table of Conducted Emission Measurement Data Not Applicable Page 9 of 11 FCC ID : PIYB6453-03A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AD003269-1 Date : 2003 April 16 4 Photograph 4.1 Photographs of the Test Setup for Radiated Emission and Conduction Emission For electronic filing, the photos are saved with filename TSup1.jpg to TSup2.jpg 4.2 Photographs of the External and Internal Configurations of the EUT For electronic filing, the photos are saved with filename ExtPho1.jpg to ExtPho2.jpg and IntPho1.jpg to IntPho5.jpg. 5 Supplementary document The following document were submitted by applicant, and for electronic filing, the document are saved with the following filenames: Document Filename ID Label/Location LabelSmpl.pdf Block Diagram BlkDia.pdf Schematic Diagram Schem.pdf Users Manual UserMan.pdf Operational Description OpDes.pdf 5.1 Bandwidth N.A. Page 10 of 11 FCC ID : PIYB6453-03A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AD003269-1 Date : 2003 April 16 6 Appendices A1. Photos of the set-up of Radiated Emissions 1 page A2. Photos of External Configurations 1 page A3. Photos of Internal Configurations 3 pages A4. ID Label/Location 1 page A5. Block Diagram 1 page A6. Schematics 1 page A7. User Manual 2 pages A8. Operation Description 1 page ***** End of Report ***** Page 11 of 11 FCC ID : PIYB6453-03A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1401-3, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com


Document Created: 2019-10-15 05:50:12
Document Modified: 2019-10-15 05:50:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC