TEST REOIRT

FCC ID: PIY92961-04A4R

Test Report

Download: PDF
FCCID_461912

TEST REPORT Report No. : AE014541-001 Date : 2004 August 18 Application No.: LE208254(0) Applicant : Mattel Asia Pacific Sourcing Ltd. 13/F., South Tower, World Finance Centre, Harbour City, Tsim Sha Tsui, Kowloon, Hong Kong. Sample Description : One(1) submitted sample stated to be Sea Arrow Redeco of Model No. 92082 Rating : 4 x 1.5V AA size battery No. of sample(s) : Three (3) piece(s) *** Date Received : 2004 July 26. Test Period : 2004 July 26 – 2004 August 13. Test Requested : FCC Part 15 Certification Test Method : FCC Rules and Regulations Part 15 – Dec 2003 ANSI C63.4 – 2001 Test Result : See attached sheet(s) from page 2 to 11. Conclusion : The submitted sample was found to comply with requirement of FCC Part 15 Subpart B. For and on behalf of CMA Testing and Certification Laboratories Authorized Signature : Page 1 of 11 Danny Chui EMC Engineer - EL. Division FCC ID : PIY92961-04A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AE014541-001 Date : 2004 August 18 Table of Contents 1 General Information ........................................................................................................................ 3 1.1 General Description .................................................................................................................. 3 1.2 Related Submittal Grants .......................................................................................................... 3 1.3 Location of the test site ............................................................................................................. 4 1.4 List of measuring equipment ..................................................................................................... 5 2 Description of the radiated emission test ........................................................................................... 6 2.1 Test Procedure ......................................................................................................................... 6 2.2 Test Result ............................................................................................................................... 6 2.3 Radiated Emission Measurement Data ....................................................................................... 7 3 Description of the Line-conducted Test ............................................................................................ 8 3.1 Test Procedure ......................................................................................................................... 8 3.2 Test Result ............................................................................................................................... 8 3.3 Graph and Table of Conducted Emission Measurement Data ....................................................... 8 4 Photograph ..................................................................................................................................... 9 4.1 Photographs of the Test Setup for Radiated Emission and Conduction Emission........................... 9 4.2 Photographs of the External and Internal Configurations of the EUT ........................................... 9 5 Supplementary document ............................................................................................................... 10 5.1 Bandwidth ............................................................................................................................. 10 6 Appendices ............................................................................................................................... 11 Page 2 of 11 FCC ID : PIY92961-04A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AE014541-001 Date : 2004 August 18 1 General Information 1.1 General Description The equipment under test (EUT) is a superregenerative receiver for Sea Arrow Redeco. Operating at 49.860 MHz which is controlled by a LRC circuit. The EUT is powered by 4 x 1.5V “AA size” battery. When it received a forward or backward signal, it will go forward or backward. When it received a turn left or turn right signal, it will go left or right. The brief circuit description is listed as follows : - Q1 and associated circuit act as super regenerative circuit. - Q16 and associated circuit act as voltage readjust. - U2 and associated circuit act as decoder. - R8 and associated circuit act as oscillator for decoder. - Q6-Q11 and associated circuit act as control driver motor circuit. - Q2-Q5, Q12-Q13 and associated circuit act as control steering motor circuit. - Q14-Q15, Q17-Q19 and associated circuit act as servo control. 1.2 Related Submittal Grants This is a single application for certification of a receiver. Page 3 of 11 FCC ID : PIY92961-04A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AE014541-001 Date : 2004 August 18 1.3 Location of the test site Radiated emissions measurements are investigated and taken pursuant to the procedures of ANSI C63.4 – 2001. An Open Area Testing Site is set up for investigation and located at : Top of the Roof, Yan Hing Centre, 9 – 13 Wong Chuk Yeung Street, Fo Tan, Shatin, New Territories, Hong Kong. Conducted emissions measurements are investigated and also taken pursuant to the procedures of ANSI C63.4 – 2001. A double shielded room is located at : Roof Floor, Yan Hing Centre, 9 – 13 Wong Chuk Yeung Street, Fo Tan, Shatin, New Territories, Hong Kong. Page 4 of 11 FCC ID : PIY92961-04A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AE014541-001 Date : 2004 August 18 1.4 List of measuring equipment Equipment Manufacturer Model No. Serial No. Calibration Certification No. EMI Test Receiver R&S ESCS30 100001 S21141 Broadband Antenna Schaffner CBL6113B 2718 AC1753 Signal Generator IFR 2023B 202302/938 Nil LISN R&S ESH3-Z5 100038 S21142 Pulse Limiter R&S ESH3-Z2 100001 20-73194 Biconical Antenna R&S HK116 837414/004 4000.7752.02 Page 5 of 11 FCC ID : PIY92961-04A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AE014541-001 Date : 2004 August 18 2 Description of the radiated emission test 2.1 Test Procedure Radiated emissions measurements are investigated and taken pursuant to the procedures of ANSI C63.4 – 2001. The equipment under test (EUT) was placed on a non-conductive turntable with dimensions of 1.5m x 1m and 0.8m high above the ground. 3m from the EUT, a broadband antenna mounting on the mast received the signal strength. The turntable was rotated to maximize the emission level. The antenna was then moving along the mast from 1m up to 4m until no more higher value was found. Both horizontal and vertical polarization of the antenna were placed and investigated. A signal generator was used to radiate an unmodulated continuous wave (CW) signal to the EUT (superregenerative receiver) at its operating frequency in order to “cohere” the characteristic broadband emissions from the receiver. 2.2 Test Result The emissions meeting the requirement of section 15.109 are based on measurements employing the CISPR qusai-peak detector. It was found that the EUT meet the FCC requirement. Page 6 of 11 FCC ID : PIY92961-04A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AE014541-001 Date : 2004 August 18 2.3 Radiated Emission Measurement Data Radiated emission pursuant to the requirement of FCC Part 15 subpart B Frequency Polarity Reading at 3m Antenna and Field Strength Limit at 3m Margin (MHz) (H/V) (dBµV/m) Cable factor (dBµV/m) (dBµV/m) (dB) (dB) 49.638 V 22.8 11.1 33.9 40.0 -6.1 50.079 V 26.3 8.7 35.0 40.0 -5.0 50.525 V 26.1 8.7 34.8 40.0 -5.2 51.469 V 20.9 8.7 29.6 40.0 -10.4 97.719 V 16.5 10.0 26.5 43.5 -17.0 97.825 V 16.2 10.0 26.2 43.5 -17.3 98.417 V 15.8 10.0 25.8 43.5 -17.7 145.970 V 13.6 12.4 26.0 43.5 -17.5 146.432 V 14.0 12.4 26.4 43.5 -17.1 195.170 V 16.8 10.5 27.3 43.5 -16.2 Page 7 of 11 FCC ID : PIY92961-04A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AE014541-001 Date : 2004 August 18 3 Description of the Line-conducted Test 3.1 Test Procedure Conducted emissions measurements are investigated and also taken pursuant to the procedures of ANSI C63.4 – 2001. The EUT was setup as described in the procedures, and both lines were measured. 3.2 Test Result No measurement is required as the EUT is a battery-operated product. 3.3 Graph and Table of Conducted Emission Measurement Data Not Applicable Page 8 of 11 FCC ID : PIY92961-04A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AE014541-001 Date : 2004 August 18 4 Photograph 4.1 Photographs of the Test Setup for Radiated Emission and Conduction Emission For electronic filing, the photos are saved with filename TSup1.jpg to TSup2.jpg 4.2 Photographs of the External and Internal Configurations of the EUT For electronic filing, the photos are saved with filename ExPho1.jpg to ExPho2.jpg and InPho1.jpg to InPho2.jpg. Page 9 of 11 FCC ID : PIY92961-04A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AE014541-001 Date : 2004 August 18 5 Supplementary document The following document were submitted by applicant, and for electronic filing, the document are saved with the following filenames: Document Filename ID Label/Location LabelSmp.jpg Block Diagram BlkDia.pdf Schematic Diagram Schem.pdf Users Manual UserMan.pdf Operational Description OpDes.pdf 5.1 Bandwidth NA 5.2 The duty cycle is simply the on-time divided by the period : NA Page 10 of 11 FCC ID : PIY92961-04A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com

TEST REPORT Report No. : AE014541-001 Date : 2004 August 18 6 Appendices A1. Photos of the set-up of Radiated Emissions 1 page A2. Photos of External Configurations 1 page A3. Photos of Internal Configurations 1 page A4. ID Label/Location 1 page A5. Block Diagram 1 page A6. Schematics 1 page A7. User Manual 2 pages A8. Operation Description 1 page ***** End of Report ***** Page 11 of 11 FCC ID : PIY92961-04A4R This document shall not be reproduced either in full or in part except with written approval by the Authorized Representative of CMA Testing. Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: info@cmatcl.com Web Site: http://www.cmatcl.com


Document Created: 2004-08-18 17:30:56
Document Modified: 2004-08-18 17:30:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC